One-dimensional integral imaging based on parallax barrier

One-dimensional integral imaging (1DII) which only has horizontal disparity is a practical solution of high resolution in the vertical direction, low-cost, easy-viewable three-dimensional (3D) display. A 1DII based on a parallax barrier is proposed in this paper. The 1DII consists of a parallax barrier and a display panel. The operation principle and parameter calculation of the 1DII are described in detail. Two prototypes of the proposed 1DII and conventional 1DII based on a lenticular lens array are developed. The proposed 1DII improves the quality of the 3D image and provides larger viewing angle than that based on a lenticular lens array, and it is simpler and has lower cost than that based on a lenticular lens array.     

Effects and Corrections for Mobile NMR Measurement

Nuclear magnetic resonance (NMR) under motion has drawn significant attention in recent years. Motion of the NMR probe has serious effects on NMR measurement. For example, NMR logging normally runs at downhole condition with tool motion at a speed of 30 ft/min. We propose here methods for motion corrections of NMR data based on the quantitative analysis of motion effects on polarization and echo acquisition. We also produced a multi-functional NMR scanning system to verify the theoretical analysis. Presented experiments demonstrate that the theoretical and experimental results match very well.     

Synthesis and Characterization of Pressure and Temperature Dual‐Responsive Polystyrene Microbeads

A facile approach to the synthesis of pressure and temperature dual‐responsive polystyrene (PS) microbeads with controlled sizes via dispersion polymerization is described. Three different luminophors are selected and directly introduced into the reaction system and thus incorporated into the resultant PS microbeads during polymerization. By manipulating the reaction conditions, including concentrations of the initiator and monomer, polarity of the reaction medium, and injection rate for the monomer, uniform PS microbeads with sizes ranging from 1 to 5 μm are obtained. When a light source centered at 365 nm is used to excite all the luminophors in the PS beads, three distinct and resolvable emission peaks corresponding well with the luminophors are observed. By taking advantage of their sensitive responses to both pressure and temperature, the PS beads can be utilized for quantitative measurements of these two stimulations simultaneously. The PS beads loaded with multiple luminophors have the ability to serve as building blocks for the fabrication of novel sensing and imaging devices and therefore provide a promising strategy for the study of aerodynamics.     

BN链掺杂的石墨烯纳米带的电学及磁学特性

基于密度泛函理论第一性原理系统研究了BN链掺杂石墨烯纳米带(GNRs)的电学及磁学特性, 对锯齿型石墨烯纳米带(ZGNRs)分非磁态(NM)、反铁磁态(AFM)及铁磁性(FM)三种情况分别进行考虑. 重点研究了单个BN链掺杂的位置效应. 计算发现: BN链掺杂扶手椅型石墨烯纳米带(AGNRs) 能使带隙增加, 不同位置的掺杂, 能使其成为带隙丰富的半导体. BN链掺杂非磁态ZGNR的不同位置, 其金属性均降低, 并能出现准金属的情况; BN链掺杂反铁磁态ZGNR, 能使其从半导体变为金属或半金属(half-metal), 这取决于掺杂的位置; BN链掺杂铁磁态ZGNR, 其金属性保持不变, 与掺杂位置无关. 这些结果表明: BN链掺杂能有效调控石墨烯纳米带的电子结构, 并形成丰富的电学及磁学特性, 这对于发展各种类型的石墨烯基纳米电子器件有重要意义. 关键词： 石墨烯纳米带 BN链掺杂 输运性质 自旋极化     

Ge掺杂n型Sn基VIII型单晶笼合物的制备及热电传输特性

采用Sn自熔剂法制备了具有n型传导的VIII型Ba8Ga16 xGexSn30(0 x 1.0)单晶笼合物,并对其结构和热电特性进行研究.研究结果表明:Ge在单晶中的实际含量较少,随着掺杂量的增加样品的晶格常数略有减小,Ge掺杂后样品的载流子浓度较掺杂前低,迁移率增加;所有样品的Seebeck系数均为负值,且绝对值较未掺杂样品低,但Ge掺杂后样品的电导率提高了62%;x=0.5的样品在500 K附近取得最大ZT值1.25.     

Carbon nanotube emitters and field emission triode

Based on our study on field emission from multi-walled carbon nanotubes (MWNTs), we experimentally manufactured field emission display (FED) triode with a MWNTs cold cathode, and demonstrated an excellent performance of MWNTs as field emitters. The measured luminance of the phosphor screens was 1.8 × 103 cd/m2 for green light. The emission is stable with a fluctuation of only 1.5% at an average current of 260 μA.     

Monodisperse polystyrene microspheres prepared by dispersion polymerization with microwave irradiation

Monodisperse polystyrene microspheres with diameters of 200–500 nm were prepared by dispersion polymerization with microwave irradiation with poly(N‐vinylpyrrolidone) as a steric stabilizer and 2,2′‐azobisisobutyronitrile as a radical initiator in an ethanol/water medium. The morphology, size, and size distribution of the polystyrene microspheres were characterized with transmission electron microscopy and photon correlation spectroscopy, and the formed films of the polystyrene dispersions were characterized with atomic force microscopy. The effects of the monomer concentration, stabilizer concentration, and initiator concentration on the size and size distribution of the polystyrene microspheres were investigated. The polystyrene microspheres prepared by dispersion polymerization with microwave irradiation were smaller, more uniform, and steadier than those obtained with conventional heating. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2368‐2376, 2005     

Dense coding scheme using superpositions of Bell-states and its NMR implementation

Dense coding using superpositions of Bell-states is proposed. The generalized Grover's algorithm is used to prepare the initial entangled states, and the reverse process of the quantum algorithm is used to determine the entangled state in the decoding measurement. Compared with the previous schemes, the superpositions of two Bell-states are exploited. Our scheme is demonstrated using a nuclear magnetic resonance (NMR) quantum computer. The corresponding manipulations are obtained. Experimental results show a good agreement between theory and experiment. We also generalize the scheme to transmit eight messages by introducing an additional two-state system.     

Transport in solid oxide porous electrodes: Effect of gas diffusion

We extend our previous treatment of a mixed ionic electronic conductor membrane, consisting of a porous cathode and anode separated by a thin non-porous layer, to the case where mass transport of molecules in the porous electrodes can be the rate-limiting step. The linearized transport equations for the ion-hole pairs in the solid and of the gas molecules in the pores are characterized by the length scales L_P = √L_d(1 − φ)/Sτ_s and L_g = 2L_p√[τ_sφ/τ(1 − φ)][D_gc_g/D_IEc_i] respectively, where L_d = D_IE/K is the length scale that determines the transition from diffusion limited to surface exchange limited transport in the non-porous electrodes, K is the surface exchange coefficient, D_IE and D_g are the diffusion coefficients of the ion-hole pairs and of the molecules, c_i and c_g are the concentrations of the ions and molecules, S is the pore surface area per unit volume, φ the porosity and τ_s and τ the tortuosities of the solid and pore phases respectively. When L_g L_p, which is the case treated previously, the rate-limiting step in the transport is ionic diffusion and surface exchange. Enhancements in oxygen ion current of two orders in magnitude, over non-porous electrodes, are in principle achievable with porous perovskite MIEC having surface area s = 10⁶ cm⁻¹. When L_g L_p the rate-limiting step is mass transport in the pores and the enhancement in ion current is substantially reduced.