Luminescent properties of carbon-rich starburst gold(I) acetylide complexes. Crystal structure of [TEE][Au(PCy3)]4 ([TEE]H4=tetraethynylethene)

Two carbon-rich starburst gold(I) acetylide complexes [TEE][Au(PCy₃)]₄ (3, [TEE]H₄=tetraethynylethene) and [TEB][Au(PCy₃)]₃ (6, [TEB]H₃=1,3,5-triethynylbenzene) were prepared and their UV–vis absorption, emission and excitation spectra have been recorded. In fluid CH₂Cl₂ solutions, 3 exhibits prompt ¹(ππ*) fluorescence with λ_0–0 and λ_max at 413 and 428 nm, respectively, while 6 displays ³(ππ*) phosphorescence with λ_0–0 and λ_max at 446 and 479 nm, respectively. The crystal structure of 3·CH₂Cl₂ has been determined.     

A cyclodextrin-modified ketoester for stereoselective epoxidation of alkenes

A beta-cyclodextrin-modified ketoester 2 was prepared by covalent attachment of a reactive ketone moiety to beta-cyclodextrin. Treatment of 2 with Oxone as terminal oxidant would produce CD-substituted dioxirane, which can effect stereoselective alkene epoxidation. The 2-mediated (S)-alpha-terpineol epoxidations proceeded to give terpineol oxides in high yields, and the stereoselectivities (i.e., cis-/trans-epoxide ratio) decreased from 2.5:1 to 1:1.2 with increasing steric bulkiness of the terpenes. This steric-dependent stereoselectivity can be understood based on different binding geometries of the 2/terpene inclusion complexes according to the (1)H NMR titration and 2D ROESY experiments. Enantioselective epoxidation of styrenes has also been achieved with 2 as catalyst (20-50 mol %) in aqueous acetonitrile solution, and up to 40% ee was obtained in 4-chlorostyrene epoxidation at 0 degrees C. Similar enantioselectivities were also obtained for the 2-mediated epoxidation of 1,2-dihydronaphthalene (37% ee), 4-chlorostyrene (36% ee), and trans-stilbene (31% ee).     

First synthesis of naturally occurring (±)-epi-conocarpan

(±)-epi-Conocarpan 1 was synthesized via the key intermediate 5-bromo-cis-2-(4-methoxyphenyl)-3-methyl-2,3-dihydrobenzofuran 6 which was synthesized by a ruthenium(II) porphyrin-catalyzed intramolecular C-H insertion reaction using aryl tosylhydrazone salt 5 as the carbene source, starting from the commercially available 5-bromo-2-hydroxyacetophenone.     

Determination of alendronate in pharmaceutical dosage formulations by ion chromatography with conductivity detection.

A method was developed and validated for the direct determination in pharmaceutical dosage formulations of alendronate, a non-chromophoric compound. It is based on the use of single-column ion chromatography with conductivity detection that obviates the need for the tedious chemical derivatization procedures that are required for UV and fluorescence detection. Diluted samples of 0.05 mg/ml were chromatographed directly on a Waters IC-Pak HR anion-exchange column or a Dionex OmniPac PAX-100 column with dilute nitric acid as the mobile phase followed by conductivity detection. The method was validated and shown to be precise, accurate and specific for the assay of alendronate in intravenous (i.v.) solution and tablet formulations. The ruggedness of the assay was studied by generating data from four different instruments. Also established was the equivalence between this method and a previously reported high-performance liquid chromatographic method with 9-fluorenylmethyl chloroformate derivatization and UV detection. Application of the method to the determination of alendronate in i.v. and tablet formulations is presented and the performances of the Waters IC-Pak HR and Dionex OmniPac columns are discussed.     

Syntheses and Electrical Conductivities of 9-Fluorenone-Iodine-Alkali Iodide Complexes

A new series of 9-fluorenone-iodine-alkali iodide complexes (FIMI, M=Na, K, Rb or Cs) has been prepared from chloroform. These complexes yield needle-like crystals with metallic luster along the needle axis. The longitudinal dc conductivities at room temperature are in the order of 10^?3 to 10^?5 S cm^?1. They all have semiconductive properties with activation energies of about 0.4 to 0.7 eV. A significant result is that the conductivity varies systematically with the cation size. A decrease in the cation size results in an increase in the conductivity. Resonance Raman spectra show that iodine is present as a linear chain of symmetric I^?₃ units in these complexes. Infrared spectra of these complexes are discussed with an attempt to estimate the interaction between the alkali cation and the carbonyl group of 9-fluorenone.     

Electronic spectroscopy, photophysical properties, and emission quenching studies of an oxidatively robust perfluorinated platinum porphyrin

The highly electron-deficient, beta-octafluorinated meso-tetrakis(pentafluorophenyl)-porphyrin (H(2)F(28)TPP) was metalated with platinum to afford the oxidatively robust luminophore [PtF(28)TPP], and its X-ray structure shows that the porphyrin core exists in a slightly saddle-shaped conformation. The absorption spectrum of [PtF(28)TPP] in CH(2)Cl(2) displays a near-UV Soret band (B) at 383 nm (epsilon = 2.85 x 10(5) dm(3) mol(-1) cm(-1)) and two visible Q(1,0) and Q(0,0) bands at 501 (epsilon = 1.45 x 10(4) dm(3) mol(-1) cm(-1)) and 533 (epsilon = 1.36 x 10(4) dm(3) mol(-1) cm(-1)) nm, respectively. These absorption bands of [PtF(28)TPP] are blue-shifted from those in [PtF(20)TPP] (390, 504, and 538 nm, respectively) and [PtTPP] (401, 509, and 539 nm, respectively). Excitation of [PtF(28)TPP] (complex concentration = 1.5 x 10(-6) mol dm(-3)) in dichloromethane at the Soret or Q(1,0) or Q(0,0) band gave a phosphorescence with peak maximum at 650 nm (lifetime = 5.8 micros) and a weak shoulder at 712 nm. Both the emission lifetime and quantum yield vary with solvent polarity, and plots of tau versus E(K) and Phi versus E(K) (where E(K) is the empirical solvent polarity parameter based on the hypsochromic shift of the longest wavelength absorption of the [Mo(CO)(4)[(C(5)H(4)N)HC[double bond]NCH(2)C(6)H(5)]] complex with increasing solvent polarity; see: Kamlet, M. J.; Abboud, J. L. M.; Taft, R. W. Prog. Phys. Org. Chem. 1981, 13, pp 485-630) show linear correlation, indicating that the emission is sensitive to the local environment/medium. Electrochemical studies on [PtF(28)TPP] by cyclic voltammetry showed no porphyrin-centered oxidation at potential < or = 1.5 V versus Ag/AgNO(3), demonstrating that [PtF(28)TPP] is more resistant toward oxidation than [PtF(20)TPP] (E(1/2) = 1.33 V) and [PtTPP] (E(1/2) = 0.97 V). The porphyrin-centered reduction of [PtF(28)TPP] occurs at -0.75 and -1.18 V, which is anodically shifted from those at -1.06 and -1.55 V in [PtF(20)TPP], and -1.51 V in [PtTPP], respectively. The excited-state reduction potential of [PtF(28)TPP] is estimated to be 1.49 V versus Ag/AgNO(3). Over 97% of the emission intensity of [PtF(28)TPP] was retained after irradiation with a high power mercury arc lamp (500 W) for 14 h, compared to 90% and 12% for [PtF(20)TPP] and [PtTPP], respectively; hence, [PtF(28)TPP] exhibits superior photostability. Quenching of the emission of [PtF(28)TPP] by oxygen, alcohol, catechol, and butylamine reveals that [PtF(28)TPP] is an oxidatively robust material with medium-sensitive photoluminescence properties.     

Testing coefficients of AR and bilinear time series models by a graphical approach

AR and bilinear time series models are expressed as time series chain graphical models, based on which, it is shown that the coefficients of AR and bilinear models are the conditional correlation coefficients conditioned on the other components of the time series. Then a graphically based procedure is proposed to test the significance of the coefficients of AR and bilinear time series. Simulations show that our procedure performs well both in sizes and powers. This work was supported by the Hong Kong Polytechnic University Research Council, the National Natural Science Foundation of China (Grant No. 10671044) and the Science and Technology Bureau of Guangzhou Municipal Government of China (Grant No. LSBH-017)     

Iron-catalyzed C–H amination and its application in organic synthesis

Transition-metal-catalyzed direct C–H bond amination is an attractive strategy in preparation of nitrogen containing molecules which are common in naturally occurring and pharmaceutically important compounds. Comparing to the precious metals commonly used in this reaction, non-precious metals such as iron are abundant in earth, relatively low toxic, and more biocompatible, which meet the increasing demand for environmentally benign and sustainable chemical processes. In this review, we described the development in iron catalyzed C–H bond amination reactions from historical landmarks to recent achievements, and placed emphasis on their applications in organic synthesis, i.e. natural product synthesis and/or modification.