Pulsed remote Raman system for daytime measurements of mineral spectra

A remote Raman system has been developed utilizing a 532nm pulsed laser and gated intensified charged couple device (ICCD) detector in the oblique geometry. When the system is set for 50m sample distance it is capable of measuring Raman spectra of minerals located at distances in the range of 10-65m from the telescope. Both daytime and nighttime operations are feasible and the spectra of minerals can be measured in a short period of time, of the order of a few seconds. In oblique geometry, measured sampling depth is more than 30m, during which the system maintains very high performance without any adjustments. Much longer sampling depth (0.1-120m) has been observed when the system is configured in the coaxial geometry. Clear advantages of using a gated detection mode over the continuous (CW) mode of operation in reducing the background signal and eliminating long-lived fluorescence signals from the Raman spectra are presented. The performance of the pulsed Raman system is demonstrated by measuring spectra of Raman standards including benzene (C(6)H(6)) and naphthalene (C(10)H(8)), a low Raman cross section silicate mineral muscovite (KAl(2)(Si(3)Al)O(10)(OH)(2)), and a medium Raman cross section mineral calcite (CaCO(3)).     

Novel design of a pentacyclic scaffold as structural mimic of saframycin A

The design, synthesis and evaluation of a pentacyclic scaffold, CWO-324 to mimic saframycin A is described. CWO-324 is readily synthesized in five steps from 1,4-diacetyl-piperazine-2,5-dione and 2,5-dimethoxybenzaldehyde. CWO-324 was found to scission DNA, binds to bases 69-83(5′-GCAGTCAGG CACCGT-3′) of Hind III/Rsa I from plasmid pBR322 DNA in a foot-printing study and possesses anti-tumor activity.     

A NOVEL ZWITTERIONIC SILANE COUPLING AGENT FOR NONTHROMBOGENIC BIOMATERIALS

A novel silane coupling agent bearing sulfobetaine group, N,N-diethyl-N-（3-sulfopropyl）-aminopropyl- trimethoxysilane （DESATS）, was first designed, synthesized and characterized. Its solution property was studied by means of dynamic light scattering. DESATS was successfully bonded onto the surface of the glass and proved by ESCA. Platelet adhesion assay in vitro indicated that the nonthrombogenicity of glass slide modified with DESATS is greatly improved.     

Surface-initiated growth of poly d(A-T) by Taq DNA polymerase

In this paper, we report surface-initiated d(A-T) polymerization by Taq DNA polymerase as a method for constructing DNA-tethered surfaces using an enzyme. The enzymatic polymerization was conducted successfully via two steps: tethering of oligo d(A-T)s onto the surface presenting carboxylic acids by amide coupling and surface-initiated polymerization using Taq DNA polymerase. In this enzymatic polymerization process, the design and construction of carboxylic acid-presenting surfaces were found to be an important factor: DNA growth did not occur on the gold surface coated only with the self-assembled monolayer (SAM) of 16-mercaptohexadecanoic acid (MHDA), but effectively proceeded on the surfaces presenting mixed SAMs of MHDA and 1-pentadecanethiol. The coupling of oligo d(A-T)s and the subsequent DNA polymerization reaction were characterized by polarized infrared external reflectance spectroscopy, ellipsometry, X-ray photoelectron spectroscopy, and atomic force microscopy.     

Temperature dependence of the distribution of the first passage time: results from discontinuous molecular dynamics simulations of an all-atom model of the second beta-hairpin fragment of protein G

More than 22 000 folding kinetic simulations were performed to study the temperature dependence of the distribution of first passage time (FPT) for the folding of an all-atom Gō-like model of the second beta-hairpin fragment of protein G. We find that the mean FPT (MFPT) for folding has a U (or V)-shaped dependence on the temperature with a minimum at a characteristic optimal folding temperature T(opt). The optimal folding temperature T(opt) is located between the thermodynamic folding transition temperature and the solidification temperature based on the Lindemann criterion for the solid. Both the T(opt) and the MFPT decrease when the energy bias gap against nonnative contacts increases. The high-order moments are nearly constant when the temperature is higher than T(opt) and start to diverge when the temperature is lower than T(opt). The distribution of FPT is close to a log-normal-like distribution at T > or = T(opt). At even lower temperatures, the distribution starts to develop long power-law-like tails, indicating the non-self-averaging intermittent behavior of the folding dynamics. It is demonstrated that the distribution of FPT can also be calculated reliably from the derivative of the fraction not folded (or fraction folded), a measurable quantity by routine ensemble-averaged experimental techniques at dilute protein concentrations.     

A New Convenient Method for the Resolution of 1, 1''''-Binaphthalene-2, 2''''-diol Via a Phosphite Using (-)-Menthol as Resolving Agent

Optically active 1,1-binaphthalene-2, 2-diol has become a quite important chiral source in different fields of chirotechnology, especially in asymmetric synthesis1. Its synthesis and resolution has been extensively studied and various resolution methods have been reported2. Among the reported resolution methods, the following three, namely, via the formation of phosphoric acid derivatives3, boric acid derivatives4 and inclusion complexes5, are the most important. OHOH+_( )-1(-)-(S)-1(+)-(R)…     

Nouvelle méthode de détermination des taux de réativité des copolymères par résonance magnétique nucléaire: Application aux poly(méthacrylate de méthyle–chlorure de vinylidène)

Constant-composition copolymers of methyl methacrylate and vinylidene chloride produced by radical copolymerization are studied by ¹H-NMR at 60 and 250 MHz. The different methods of the literature for the derivation of reactivity ratios from either the copolymer composition or the sequence average lengths, or even the diad distribution, are applied but lead to rather dispersed results. A new graphical method is proposed, based on the use of peculiar values of the triad distribution functions. It allows us to detect a penultimate effect for the vinylidene chloride-rich region. In the same range, a change in tacticity of the diads and triads on the methylmethacrylate sequences, as compared with homopolymers, is observed; it suggests that the anomaly is caused by the competition of the depropagation reaction.     

Carbon fibre electrodes in flow potentiometric stripping analysis

The construction of carbon fibre flow electrodes suitable for use in connection with potentiometric and constant-current stripping is described, and the fibre electrodes are compared with a glassy carbon disc thin layer cell. The signal-to-background ratio is approximately 1.6 times higher for an 8–10 μm carbon fibre compared to the glassy carbon disc electrode. If an Ag/AgCl tube is used as both counter and reference electrode, the signal-to-noise ratio of the fibre electrode is approximately five times better than for a glassy carbon disc electrode with a calomel reference; the latter electrode design, however, gives slightly better precision. The dead volume and internal potential drop of the fibre electrodes are more than one order of magnitude smaller than for the glassy carbon disc electrode. Because of the simplicity of the manufacturing process and low material cost, the fibre cells can be used as disposable electrodes and the polishing process necessary in connection with glassy carbon disc electrodes can be omitted.     

3-Dimethylarsino-propylamin, (CH3)2As?(CH2)3?NH2, und Bis-[3-amino-propyl]-methylarsan,CH3As[(CH2)3?NH2]2

3-Dimethylarsino-propylamine, (CH₃)₂As? (CH₂)₃? NH₂, and Bis-[3-aminopropyl]-methylarsane, CH₃As[(CH₂)₃? NH₂]₂ The reduction of the nitriles Me₂As(CH₂)₂? CN (Me?CH₃) and MeAs(CH₂CH₂? CN)₂ results in the formation of the arsines Me₂As(CH₂)₃? NH₂ and MeAs[(CH₂)₃? NH₂]₂, respectively. The reactivity of these compounds, especially the formation of carbonyl complexes and heterocyclic compounds are described.