Studies on quinazolines. 11. Intramolecular imidate-amide rearrangement of 2-substituted 4-(omega-chloroalkoxy)quinazoline derivatives. 1,3 -O --> N shift of chloroalkyl groups via cyclic 1,3-azaoxonium intermediates

The omega-chloroalkylation of 2-substituted quinazolin-4(3H)-one derivatives 1 and 2 with Br-(CH(2))(n)-Cl (n = 2-4) and the intramolecular imidate-amide rearrangement of the alkylated products are described. At room temperature, the 2-phenyl substituent promoted O-alkylation, whereas the less steric 2-benzyl group led to a higher ratio of N-alkylation. The investigation of the O-alkylated products, 4-omega-chloroalkoxyquinazolines, revealed that the migration of omega-chloroethyl and omega-chloropropyl groups from oxygen to nitrogen should be intramolecular via five- and six-membered cyclic 1,3-azaoxonium intermediates, respectively. Competition between rearrangement and nucleophilic substitution results in the formation of 7a,b and 8a,b from the nucleophilic substitution of 4a,b and 6a,b, respectively.     

The defect structure of CdTe: Self-diffusion data

Cadmium and Te tracer self-diffusion was studied for pure and indium-doped CdTe. Analysis of the results leads to a point defect model in which imperfections with various charges play a role. Expressions for the tracer diffusion coefficients by various mechanisms and for the diffusion coefficients of individual point defects are derived.     

Effects of 2‐hydroxyalkyl methacrylates on the styrene miniemulsion polymerizations stabilized by SDS and alkyl methacrylates

The effects of 2‐hydroxyalkyl methacrylates (HEMA and HPMA) on the styrene miniemulsion polymerizations stabilized by SDS/lauryl methacrylate (LMA) or SDS/stearyl methacrylate (SMA) were investigated. A mixed mode of particle nucleation (monomer droplet nucleation and homogeneous nucleation) is operative during polymerization. Homogeneous nucleation plays a crucial role in the polymerizations stabilized by SDS/LMA, whereas monomer droplet nucleation becomes more important in the polymerizations stabilized by SDS/SMA. The polymerization kinetics is insensitive to the type of 2‐hydroxyalkyl methacrylates, but the difference in the relative importance of monomer droplet nucleation and homogeneous nucleation is detected. Incorporation of 1‐pentanol (C₅OH) into the reaction mixture also shows a significant influence on the polymerizations stabilized by SDS/LMA or SDS/SMA. This is attributed to the formation of a close‐packed structure of SDS and C₅OH on the droplet surface, which acts as a barrier to the incoming oligomeric radicals. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3188–3199, 2000     

Colloidal stability of dextran-modified latex particles toward adsorption of concanavalin A

The colloidal stability of the dextran-modified poly(methyl methacrylate) (PMMA) latex particles toward adsorption of a carbohydrate-binding protein, concanavalin A (Con A), is primarily controlled by the charge neutralization mechanism. Formation of a crosslinked network structure via the specific affinity interactions between the dimeric Con A molecules and the dextran molecules anchored onto different latex particles may also have an impact on the coagulation kinetics. Judging from the data of coagulation kinetics, the colloidal stability of the latex particles toward added Con A in the decreasing order is: latex particles without dextran modification>latex particles with a dextran content of 2.15%>latex particles with a dex-tran content of 1.24% based on total polymer weight (PMMA+grafted dextran). The coagulation mechanisms involved in the adsorption of Con A onto the latex particles have been proposed to explain these experimental data. Charge neutralization of the negatively charged latex particles by adsorption of the positively charged Con A is the predominant destabilization mechanism. The ratio of the number of dextran active sites to that of Con A molecules plays an important role in the formation of the crosslinked network structure. The electrolytes in water cause a reduction in the electrostatic repulsion force among the interactive latex particles, but this ionic strength effect is not significant in comparison with charge neutralization. Received: 22 October 1997 Accepted: 24 December 1997     

Emulsion Polymerization of Acrylic Monomers Stabilized by Poly(Ethylene Oxide)

Abstract

The stability of acrylic latices stabilized by poly(ethylene oxide) (PEO) is governed by the bridging flocculation process during polymerization. The final latex particle size increases with increasing concentration of initiator, PEO, or NaCl. The total scrap formed during the reaction increases rapidly with increasing NaCl concentration due to the ionic strength effect. It is shown that the final latex particle size decreases rapidly with an increase in the agitation speed. The amount of total scrap formed during polymerization is generally greater at a higher agitation speed. These results suggest that the fraction of the particle surface covered by PEO and the ratio of the thickness of the PEO adsorption layer to that of the electric double layer of the latex particles should play an important role in determining the final latex particle size and colloidal stability.     

Semibatch Emulsion Polymerization of Butyl Acrylate: Effect of Functional Monomers

Abstract

The concentration of sodium lauryl sulfate (SLS) in the initial reactor charge is the most important parameter in determining the latex particle size during semibatch emulsion polymerization of butyl acrylate in the presence of acrylic acid (AA), methacrylic acid, or hydroxyethyl methacrylate. The final latex particle size decreases with increasing concentration of SLS, NP-40, or functional monomer. The carboxylic monomer AA is the most efficient functional monomer to nucleate and then stabilize the latex particles. The plot of log N _f vs log SLS shows a slope of 0.4–0.8, which is more consistent with Feeney's analysis based on the coagulative nucleation mechanism. Experimental data also show that the particle size first decreases to a minimum and then increases with an increase in the concentration of the neutralizing agent NaHCO₃. The optimal concentration NaHCO₃ for achieving the smallest latex particle size occurs at a point close to 0.15–0.29%. Experimental data of the particle size distribution and molecular weight distribution show that the aqueous phase reaction can play a very important role during the particle nucleation period.     

A novel derivatization approach for simultaneous determination of glyoxal, methylglyoxal, and 3-deoxyglucosone in plasma by gas chromatography-mass spectrometry

A two-step derivatization approach has been developed to enable the simultaneous analysis of glyoxal, methylglyoxal, and 3-deoxyglucosone by the most efficient and widely applied GC-MS methodology. These three analytes are reactive carbonyl compounds associated with the formation of advanced glycation and lipoxidation end products, a process thought to contribute to uremic toxicity and referred to as "carbonyl stress". Effective analysis of these compounds would facilitate understanding these compounds' role in diabetes-related complications. Plasma samples were deproteinized by acetonitrile, followed by a two-step derivatization approach. Pooled plasma samples from healthy individuals were used as the "blank" for preparing calibration standards. The concentrations of the analytes in the "blank" were first determined by standard addition method. Calibration parameters were accordingly established and used to analyze these compounds in plasma samples collected from healthy individuals and diabetic patients. Analytical findings are comparable with those reported in the literature. Quantitation data can be further improved by making available and using isotopically labeled analogs of these analytes as the internal standards.     

Condensed 1,3-benzothiazinones. 1. Facile synthesis of 2-amino-1,2,4-triazolo[5,1-b][1,3]-benzothiazin-9-one

Treating 2-mercaptobenzohydrazide ( 1a ) with cyanogen bromide gave 3-amino-2-imino-3,4-dihydro-2.H-1,3-benzothiazin-4-one ( 2a ). This compound underwent further cyclocondensation with a second molecule of cyanogen bromide or S-methylisothiourea sulfate to afford the biologically interesting 2-amino-1,2,4-triazolo-[5,1-b][1,3]benzothiazin-9-one ( 3c ). Compound 3c could also be prepared directly from 1a by treating with excess amount of cyanogen bromide in more satisfactory yield.     

Simulation of non‐linear free surface motions in a cylindrical domain using a Chebyshev–Fourier spectral collocation method

When a liquid is perturbed, its free surface may experience highly non‐linear motions in response. This paper presents a numerical model of the three‐dimensional hydrodynamics of an inviscid liquid with a free surface. The mathematical model is based on potential theory in cylindrical co‐ordinates with a σ‐transformation applied between the bed and free surface in the vertical direction. Chebyshev spectral elements discretize space in the vertical and radial directions; Fourier spectral elements are used in the angular direction. Higher derivatives are approximated using a collocation (or pseudo‐spectral) matrix method. The numerical scheme is validated for non‐linear transient sloshing waves in a cylindrical tank containing a circular surface‐piercing cylinder at its centre. Excellent agreement is obtained with Ma and Wu's [Second order transient waves around a vertical cylinder in a tank. Journal of Hydrodynamics 1995; Ser. B4 : 72–81] second‐order potential theory. Further evidence for the capability of the scheme to predict complicated three‐dimensional, and highly non‐linear, free surface motions is given by the evolution of an impulse wave in a cylindrical tank and in an open domain. Copyright © 2001 John Wiley & Sons, Ltd.