Fe掺杂YbMnO3晶体的磁性增强研究

通过固相反应和熔融法制备了不同掺杂浓度的Fe掺杂锰酸镱(YbMnO3)晶体,并研究了晶体的铁磁性和反铁磁性性质.不同浓度掺杂YbMn1-xFexO3的晶格参数的变化及XRD物相分析显示,Fe离子进入了YbMnO3晶体的晶胞.磁学性质的测量表明,YbMn0.45Fe0.55O3晶体中存在明显提高的铁磁性质;与YbMnO3晶体相比,YbMn0.45Fe0.55O3晶体的尼尔温度由81 K大幅提高到116 K,同时晶体的反铁磁强度提高了两个数量级.YbMn1-xFexO3晶体具有比YbMnO3晶体更加优异的磁学性质.     

Selective small molecule peptidomimetic ligands of TrkC and TrkA receptors afford discrete or complete neurotrophic activities

We designed a minilibrary of 55 small molecule peptidomimetics based on beta-turns of the neurotrophin growth factor polypeptides neurotrophin-3 (NT-3) and nerve growth factor (NGF). Direct binding, binding competition, and biological screens identified agonistic ligands of the ectodomain of the neurotrophin receptors TrkC and TrkA. Agonism is intrinsic to the peptidomimetic ligand (in the absence of neurotrophins), and/or can also be detected as potentiation of neurotrophin action. Remarkably, some peptidomimetics afford both neurotrophic activities of cell survival and neuronal differentiation, while others afford discrete signals leading to either survival or differentiation. The high rate of hits identified suggests that focused minilibraries may be desirable for developing bioactive ligands of cell surface receptors. Small, selective, proteolytically stable ligands with defined biological activity may have therapeutic potential.     

Investigation of possible structures of silicon nanotubes via density-functional tight-binding molecular dynamics simulations and ab initio calculations

We show, computationally, that single-walled silicon nanotubes (SiNTs) can adopt a number of distorted tubular structures, representing respective local energy minima, depending on the theory used and the initial models adopted. In particular, "gearlike" structures containing alternating sp(3)-like and sp(2)-like silicon local configurations have been found to be the dominant structural form for SiNTs via density-functional tight-binding molecular dynamics simulations (followed by geometrical optimization using Hartree-Fock or density function theory) at moderate temperatures (below 100 K). The gearlike structures of SiNTs deviate considerably from, and are energetically more stable than, the smooth-walled tubes (the silicon analogues of single-walled carbon nanotubes). They are, however, energetically less favorable than the "string-bean-like" SiNT structures previously derived from semiempirical molecular orbital calculations. The energetics and the structures of gearlike SiNTs are shown to depend primarily on the diameter of the tube, irrespective of the type (zigzag, armchair, or chiral). In contrast, the energy gap is very sensitive to both the diameter and the type of the nanotube.     

A simple self-assembly method for colloidal photonic crystals with a large area

Colloidal photonic crystals were fabricated using polystyrene particles (180 nm) and PMMA particles (450 nm), respectively, with a new and simple self-assembly method without special equipment. SEM images indicate that the prepared samples have ordered structures with few defects. The position of the stop-band scale nicely agrees with the particles' size. The sintering process of the PS photonic crystal film was studied with AFM heating system.     

Identification of non-cross-linked compounds in methanolic extracts of cured and aged linseed oil-based paint films using gas chromatography-mass spectrometry

Methanolic extracts of paint samples of different composition and age were qualitatively investigated by GC–MS using an on-column injector after off-line methylation or trimethylsilyl derivatisation, and on-line thermally assisted (trans)methylation with tetramethylammonium hydroxide using Curie-point pyrolysis–GC–MS. The combination of these three analytical strategies led to the identification of typical oxidation products of unsaturated fatty acids by interpretation of their mass spectrum. Some of the identified compounds have not been reported before. Both the off-line and on-line GC–MS strategy show series of short-chain fatty (di)acids and C₁₆ and (oxidised) C₁₈ fatty acids. The major advantage of the on-line pyrolysis–GC–MS approach is that chemical work-up is minimal and very quick. With this technique both the carboxylic acid functionalities, and hydroxyl groups are methylated. Young paint films are shown to contain relatively more oxidised C₁₈ fatty acids and less diacids compared to older paints, which is indicative for the on-going oxidation processes within the paint. After trimethylsilylation, monoacylglycerols are detected indicative for hydrolytic processes, which reflect the relative distribution of the most prominent silylated fatty acids present. Relatively more C₁₆ and C₁₈ monoacylglycerols are found in young paints, whereas older paints contain higher amounts of monoacylglycerols of diacids.     

Intracellular trafficking and metabolic turnover of yeast prepro-alpha-factor-SRIF precursors in GH3 cells

Chimeric genes coding for prepro region of yeast alpha-factor and anglerfish SRIF were expressed in rat GH3 cells to determine whether yeast signals could regulate hormone processing in mammalian cells. We report that nascent hybrid polypeptides were efficiently targeted to ER, where cleavage of signal peptides and core glycosylation occurred, and were localized mainly in Golgi. These data indicate that prepro region of yeast alpha-factor functions in sorting molecules to secretory pathway in mammalian cells. A hybrid construct with a mutated signal peptide underwent similar ER translocation, whereas such a mutation resulted in defective translocation in yeast (Cheong et al., 1997). This difference may be due to the differences in ER translocation between yeast and mammalian cells, i.e., posttranslational versus cotranslational translocation. Processing and secretion of metabolically labeled hybrid propeptides to mature SRIF peptides were assessed by HPLC. When pulse-labeled cells were chased for up to 2 h, intracellular propeptides disappeared with a half-life of approximately 25 min, showing that approximately 68% of initially synthesized propeptides were secreted constitutively. About 22% of SRIF-related products were proteolytically processed to mature SRIF, of which 38.7% were stored intracellularly with a half-life of approximately 2 h. In addition, immunocytochemical localization showed that a small proportion of SRIF molecules accumulated in secretory vesicles. All these results suggest that yeast prepropeptide could direct hybrid precursors to translocate into ER lumen and transit through secretory pathway to the distal elements of Golgi compartment, but could process and target it less efficiently to downstream in rat endocrine cells.     

Ultrasonic guided wave parameters for detection of axial cracks in feeder pipes of PHWR nuclear power plants

The dispersion curves for the feeder pipes in PHWR nuclear power plants were determined. The wave modes used for the detection of notches in the feeder pipe were confirmed as F(m,2) and/or L(0,1) by an analysis of short time Fourier transformation (STFT). The axial notches in the straight pipe were not detectable, but an axial notch in a bent pipe was detected with the mode at the frequency of 500 kHz. Initial F(m,2) and/or L(0,1) modes contains a circumferential displacement and might be converted to certain complicated modes in the bent region, which is sensitive to the axial notch. The circumferential guided wave technique was also applied for quantitative evaluation of the axial notches. The waves generated by a rocking motion of the transducer along the circumferential direction were estimated as the circumferential guided waves after a review of the acquired data and the dispersion curves.     

Fabrication of concave refractive microlens arrays in solgel glass by a simple proximity-effect-assisted reflow technique

We report a simple method for fabricating a concave refractive microlens array (MLA) in solgel glass by using a proximity-effect-assisted reflow technique. The solgel concave refractive MLA that we fabricated had excellent surface smoothness; good dimensional conformity, with an 8.23% nonuniformity of the microlens elements; and structural perfection, with a biggest deviation of 1% from a perfect concave spherical crown. The relative error between the measured and the designed values of the concave MLA's focal length was only 1.83%. Compared with the conventional fabrication techniques for concave MLAs, the proposed method has significant advantages including simplicity, low cost, good element conformity, and smooth device surface.     

Origins of selectivities in proline-catalyzed alpha-aminoxylations

The mechanisms, transition structures, regioselectivity, and stereoselectivity of proline-catalyzed alpha-aminoxylation reactions were studied with density functional theory (B3LYP/6-31G(d)). The most favorable transition structure involves the nucleophilic attack of the (E)-proline enamine to the oxygen of the nitrosobenzene with proton transfer from the carboxylic acid to the nitrogen. Enamine attack to the oxygen is favored over the attack on the nitrogen due to the greater basicity of the nitrogen. Previously proposed zwitterionic enaminium pathways are highly disfavored due to the energetic penalty associated with charge separations.