Intermediate Self-similar Solutions of the Nonlinear Schrodinger Equation with an Arbitrary Longitudinal Gain Profile

We study pulse propagation in a normal-dispersion optical fibre amplifier with an arbitrary longitudinal gain profile by self-similarity techniques. We show the functional form of the development of low-amplitude wings on the parabolic pulse, which are associated with the evolution of an arbitrary input pulse to the asymptotic parabolic pulse solution. It is found that for the increasing gain the amplifier output corresponding to the input Gaussian pulse converges to the asymptotic parabolic pulse solution more quickly than the output obtained with the input hyperbolic secant pulse, whereas for the decreasing gain the input pulse profiles have nearly no effect on the speed of convergence to the parabolic pulse solution. These theoretical results are confirmed by numerical simulations.     

变湿工况条件下热泵空调系统的换热及热力学特性分析

1引言空调系统的热湿负荷计算、设备选型和系统设计，都是根据冬夏两季室外空气计算参数和室内最大的热湿负荷决定的。这是空调系统最不利的运行工况。实际上室外空气的状态参数会随季节变化，室内热湿负荷也会随生产工艺过程和室内人员的活动状况随时间变化。不同行业对?..     

Entropy and equilibrium property of QCD-instanton induced final state in deep-inelastic scattering

The scaling and additivity properties of Rényi entropy in rapidity space of the instanton final state (IFS) and current jet identified by the r-sorting method from the QCDINS Monte Carlo event sample are to saturation with decreasing phase space scale. Furthermore, it is found that the additivity of H2 holds well for the IFS in narrow rapidity windows at different positions. These results indicate that the IFS produced in the instanton-induced process of deep inelastic scattering has reached local equilibrium.     

DYNAMIC MODELLING AND VIBRATION ANALYSIS OF A FLEXIBLE CABLE-STAYED BEAM STRUCTURE

In this paper, the non-linear vibration of a cable-stayed beam with time-varying length and tension in the cable is investigated. A set of non-linear, time-varying differential equations describing this coupling system is derived by Hamilton's principle and the finite element method. According to the results of numerical simulation, the tension of the cable is related to the cable length, which in turn is a function of the longitudinal and transverse displacements of the cable. Furthermore, it is shown that the tension and length of the cable can be considerably different by using linear and non-linear models.     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

 利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组，并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差，以确保每段光纤中的最高工作温度是相同的。通过优化，7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ，8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃，8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差，实现了光纤中温度分布的均匀性，并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

多辊轧机冷轧技术在靶材料制备中的应用

 叙述了多辊轧机轧制金属薄膜原理，以Ti膜制备为例，借助多辊轧机冷轧技术进行1.5 μm厚钛薄带的制备工艺研究。对薄膜的特性测试结果表明：工作辊的表面粗糙度对于轧制薄膜的表面粗糙度的影响很大，降低工作辊表面的粗糙度可以得到粗糙度为25.2 nm的金属薄膜。     

溅射功率对直流磁控溅射Ti膜结构的影响

 采用直流磁控溅射方法制备了纯Ti膜，研究了不同功率下Ti膜的沉积速率、表面形貌及晶型结构，并对其应力进行了研究。研究表明：薄膜的沉积速率随溅射功率的增加而增加，当溅射功率为20 W时，原子力显微镜(AFM)图像显示Ti膜光洁、致密，均方根粗糙度最小可达0.9 nm。X射线衍射(XRD)分析表明薄膜的晶体结构为六方晶型，Ti膜应力先随溅射功率增大而增大，在60 W时达到最大值（为945.1 MPa），之后随溅射功率的增大有所减小。     

带膨胀机的CO_2跨(超)临界逆循环的热力学分析

ＣＯ２是一种安全可靠的自然工质,可望在空调和热泵系统中得到应用。根据热力学第二定律,本文提出比较各类循环的统一方法一当量温度法。本文对带膨胀机的ＣＯ２跨临界循环及其系统进行分析和研究。结果显示该循环具有较高的用能效率,在技术上是可行的．     

非均匀孔隙内加热丝上的沸腾核化现象

本文利用可视化实验台对非均匀孔隙内加热铂丝上的沸腾核化和气泡动力学特性进行可视化观测,分类整理和对比分析了不同条件下的实验现象。实验表明,非均匀孔隙内加热丝上的沸腾核化具有空间区域性,气泡动力学特性包括界面传递、干涸与湿润过程在不同特征区域,如角缝区、稀疏区和密集区呈现出各自特征。     

氧离子与氦、氖原子碰撞中转移电离过程的研究

采用位置灵敏探测和散射离子-反冲离子飞行时间测量技术,测量了氧离子与氖和氦原子碰撞过程中转移电离截面与单电子俘获截面之比.通过比较发现测量结果与文献结果的趋势一致,并对测量结果进行了讨论.