Pulsed photothermal phase-shift spectroscopy for weak absorption measurement

A novel photothermal phase-shift spectroscopy configuration based on the retro-reflected beam interference has been developed and its operational principle is described. The weak absorption measurement ability of this technique is experimentally proven with a water/ethanol solution of standard Pyronine G dye and the limit of detection is found to be 1.8 x 10(-6) absorbance. Potential applications of the technique are discussed.     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

果蔬中L—抗坏血酸的示波计时电位K3Fe（CN）6滴定法研究

本文报导的方法是在南京大学高鸿教授研究的K_3Fe(CN)_6示波极谱滴定法(在PH8的K_2HPO_4—KH_2PO_4—KBr底液中,用0.04660mol/LK_3Fe(CN)_6标准溶液对纯抗坏血酸测定)的基础上,考虑到L—抗坏血酸(以下简称V_e)在碱性、中性介质中稳定性差,如用于V_e含量很微的果蔬测定,对结果影响大。本文改为H_2C_2O_4—KBr的酸性介质作底液,用     

Determination of lead by selective chelatometric titration with HEDTA after separation as its sulphate by an improved method of precipitation

A selective titrimetric determination of Pb after separation by a modified method of precipitation as its sulphate is proposed. Pb(II), present as the perchlorate, is precipitated by gentle boiling in 3.6M H(2)SO(4) presaturated with PbSO(4) and free from any extraneous anions. The customary time-consuming evaporation to fumes of sulphuric acid is dispensed with. The precipitate is collected, and dissolved in excess of HEDTA, the surplus of which is back-titrated with Zn(II) at pH 5.0-5.5. Use of Catechol Violet and Xylenol Orange as a mixed indicator gives a sharper end-point. The standard deviation of the proposed method for 60 mg of lead is 0.35 mg. The method has been successfully used to determine Pb in non-ferrous alloys.     

Enantioselective Addition of Iodine Azide to α,β-Unsaturated Carboxylic Acid Derivatives

The addition of iodine azide to chiral conjugated N-enoyl-sultam or α,β-unsaturated N-acyloxazolidinones generated two asymmetric centers at C(α) and C(β) with high π-face differentiation and regioselectivity. The diastereomerically pure product was easily obtained by crystallization with purity up to 94% de. The structure of 2a was determined by X-ray diffraction analysis which also indicated that B and 4 are reactive conformations.     

Synthesis of 8,9-dialkoxy-substituted tetrahydrobenz[h] isoquinolines

6,7-Dimethoxy-2-naphthylethylamine, prepared by the diborane reduction of 6,7-dimethoxy-2-naphtlialeneacetamide, underwent a Pictet-Spengler cyclization to form 8,9-dimethoxy-1,2,3,4-tetrahydrobenz[h]isoquinoline. This compound is identical with that obtained by reduction of the corresponding dihydrobenzisoquinoline prepared from formamide cyclization. 6,7-Dialkoxy-2-naphthaleneacetic acids, the key intermediates for the preparation of these amides, were obtained from 6,7-dialkoxy-2-acetonaphthones by a modified Willgerodt reaction.     

Application of a novel micro-injector in the determination of indole derivatives in the rat pineal gland by capillary electrophoresis with electrochemical detection

A novel micro-injector has been fabricated for capillary electrophoresis (CE). It was successfully used for the determination of some indole derivatives for example melatonin (MT), serotonin (5-HT), tryptophan (Trp), and 5-hydroxy-tryptophane (5-HTrp) in the rat pineal gland by capillary electrophoresis with electrochemical detection (CE-EC). CE was performed in 0.20 mol L(-1) phosphate buffer (pH 8.0). The compounds investigated can be well separated and detected within 15 min. The working electrode used was a 300-microm diameter carbon electrode positioned opposite the outlet of the capillary. The relationship between peak current and analyte concentration was highly linear in the range from 0.10 to 500 micromol L(-1); detection limits (S/N = 3) were 0.03-0.13 micromol L(-1). The proposed method has been successfully used to analyze real biological samples.     

Theoretical study of thermal diffusivity of superlattices in measurements using “mirage” technique

A complete theoretical treatment for the determination of thermal diffusivity of superlattices by the mirage technique has been performed. An effective medium approximation model of the thermal conductivity and thermal diffusivity of both sublayers is presented, which is different from the simple models with the thermal diffusivity or thermal conductivity in series or parallel. The numerical calculation of the transverse component of the probe beam deflection in the mirage effect shows that the results obtained from the complete thermal-wave theory and the medium approximation model, for the optically and thermally thick superlattices, are in good agreement with each other. However, the further study on the thermally thin superlattices shows that either the series or the parallel model of the thermal conductivity should be chosen according to whether the thermal impedance of the superlattice is larger or less than that of substrate, respectively.