聚合物催化剂——Ⅰ.季铵盐聚合物试剂作三氯乙酸分解的催化剂

本文合成了一些季铵盐聚合物试剂,研究了这些试剂对三氯乙酸分解生成三氯乙酰氯的催化作用。不同季铵盐聚合物催化剂对三氯乙酸分解的催化活性顺序如下: (?) (?) 聚合物催化剂经重复使用后,活性并无明显降低。     

Solid-phase synthesis of pyrazolines and isoxazolines with sodium benzenesulfinate as a traceless linker

[reaction: see text] The preparation of pyrazoline and isoxazoline derivatives with traceless solid-phase sulfone linker strategy is described. Key steps involved in the solid-phase synthetic procedure include (i) sulfinate S-alkylation, (ii) sulfone anion alkylation, (iii) gamma-hydroxy sulfone --> gamma-ketosulfone oxidation, and (iv) traceless product release via elimination-cyclization. A library of 12 pyrazolines and isoxazolines was synthesized.     

Determination of poly-beta-hydroxybutyric acid in Bacillus thuringiensis by capillary zone electrophoresis with indirect ultraviolet absorbance detection

A new capillary electrophoresis method for determining poly-beta-hydroxybutyric acid (PHB) in Bacillus thuringiensis was established. Poly-beta-hydroxybutyric acid in samples was hydrolyzed by sulphuric acid and neutralized by Ba(OH)2. The content of produced beta-hydroxybutyrate was then determined by capillary zone electrophoresis (CZE) with indirect UV detection at 254 nm. With 5 mM p-hydroxybenzoate and 0.5 mM tetradecyltrimethylammonium bromide (TTAB) at pH 8.0 as carrier electrolyte, beta-hydroxybutyrate can be determined within 6 min. Standard regression equation was made by beta-hydroxybutyrate, and the linear range was 2-1000 microg/ml. The relative standard deviations (RSDs) for migration time and peak area are both less than 1.0%. The detection limit for beta-hydroxybutyrate was 0.2 microg/ml, which is two to three orders of magnitude lower than that of the gas chromatography (GC) method. The capillary electrophoresis method was successfully applied to determine poly-beta-hydroxybutyric acid in fermentation broth and single colony. The added standard recovery was 96%.     

Structural characterization of a novel self-assembly heterohexanuclear complex: [Ni2Ag4(μ-dppm)4(pymt)6](SbF6)2 · 2DMF · H2O

A novel heterohexanuclear complex [Ni₂Ag₄(μ-dppm)₄(pymt)₆](SbF ₆)₂ · 2DMF · H₂O (1), was synthesized by self-assembly with [Ag₂(μ-dppm)₂(MeCN)₂](SbF₆) ₂ and [Et₄N][Ni(pymt)₃] (dppm = bis(diphenylphosphino)methane, pymt = pyrimidine-2-thiolate) as components and characterized by IR spectra, elemental analysis, ¹H-NMR spectrum, ³¹P-NMR spectrum and Visible-Ultraviolet spectrum. Structure of the complex was determined by X-ray analysis.     

Direct observation of eta 2-imine formation through beta-H abstraction between amide ligands. Neutron and X-ray diffraction structure of a dihydride imine ditantalum complex

Reactions of Ta(NMe2)5 with D2SiR'Ph (R' = Me, Ph) were found to give a dideuteride eta 2-imine complex (Me2N)3Ta(mu-D)2(mu-N-eta 2-N,C-CH2NMe)Ta(NMe2)3(1-d2) through C-H activation of an amide ligand via beta-H abstraction, and the structure of 1 was confirmed by single crystal neutron and X-ray diffraction.     

Chiral Phosphinophenyloxazolines Bearing Alkoxymethyl Substituents: Synthesis and Application in the Palladium Catalyzed Allylic Substitution Reactions

The chiral phosphine‐oxazoline ligands 3 and 4 bearing 4‐alkoxymethyl substituents on the oxazoline ring with (R)‐configuration were prepared from L‐serine methyl ester in 66% and 33% yields, respectively. Along this synthetic pathway, the β‐hydroxylamides derived from L‐serine methyl ester and 2‐halobenzoyl chlorides were expediently converted to the corresponding oxazolines by using diethylaminosulfur trifluoride as the activation agent. Potassium diphenylphosphide was the reagent of choice for replacing the bromine atom on the phenyl ring, giving the desired oxazoline‐phosphine ligands 3 and 4 . Together with [Pd(η³‐allyl)Cl]₂, ligands 3 and 4 induced an enantioselective allylic substitution reaction of 1,3‐diphenyl‐2‐pro‐penyl acetate by dimethyl malonate. Although ligands 3 and 4 exhibit the (R)‐configuration, differing from the (S)‐configuration of Pfaltz‐Helmchen‐Williams phosphine‐oxazoline ligands, all these ligands led to the same enantiotopic preference in the allylic substitution reaction. To facilitate the recovery and reuse of the phosphine‐oxazoline ligand, immobilization on Merrifield resin was attempted, albeit in low loading.     

The measurement of high proton affinities for a variety of metallic compounds: a new approach by flame-ion mass spectrometry

A small amount (≤ 10⁻⁶ mol fraction) of four alkaline earth metals, tin and yttrium were introduced into five, premixed, fuel-rich, H₂–O₂–N₂ flames at atmospheric pressure in the temperature range 1820–2400 K. Aqueous salt solutions of the metals were sprayed into the premixed flame gas as an aerosol using an atomizer technique. Ions in a flame were observed by sampling flame gas through a nozzle into a mass spectrometer. The concentrations of the major neutral metallic species present in the flame were calculated from thermodynamic data currently available. The principal metallic ions observed were AOH⁺ (A = Mg, Ca, Sr, Ba, Sn) and A(OH)₂⁺ (A = Y), formed initially by proton transfer to AO and OAOH from H₃O⁺, a natural flame ion. Except for Mg, the ions were also produced by chemi-ionization processes. By adjusting the concentration(s) of the salt solution in the atomizer, it was found that a pair of ions could be brought into equilibrium within the time scale of the flame; the pairs included H₃O⁺ with a metal ion or two metallic ions. Because water is a major product of combustion, a very large difference in proton affinity PA⁰(AO) − PA⁰(H₂O) ≤ 490 kJ mol⁻¹ (117 kcal mol⁻¹) could be attempted for the proton transfer equilibrium. Using PA⁰(H₂O) = 691.0 kJ mol⁻¹ (165.2 kcal mol⁻¹) as a reference base to anchor the proton affinity scale, ion ratio measurements led to proton affinity PA⁰ values of 766, 912, 1004, 1184, 1201, and 1222 kJ mol⁻¹ (183, 218, 240, 283, 287, and 292 kcal mol⁻¹) corrected to 298 K for OYOH, SnO, MgO, CaO, SrO, and BaO, respectively; of these, only the value for OYOH has not been reported previously. If it is assumed that the neutral thermodynamic data are correct (although some appear to be in error), the uncertainties in the PA results reported here are ± 21 kJ mol⁻¹ (5 kcal mol⁻¹). The realization that these equilibria can be achieved in flames provides a new approach to consolidate and build the high end of the proton affinity ladder, primarily of metallic species which are not accessible at lower temperatures.     

In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation

In situ preparation of polypyrrole (Ppy) by photo-polymerization coated on a quartz crystal microbalance (QCM) as a low humidity sensor was reported. Different concentrations of Ppy films say 0 wt.% (as blank), 0.1, 1, and 10 wt.% were investigated to measure humidity concentrations between 14.7 and 5412.5 ppm_v. The adsorption/desorption behavior was also examined at humidity concentration 510.2 ppm_v. The sensitivities of 0, 0.1 and 1 wt.% Ppy films at 51.5 ppm_v were 0.143, 0.219 and 0.427, respectively. For 1 wt.% Ppy, the highest sensitivity was obtained. The slope and correlation coefficients (R²) for 1 wt.% Ppy at the ranges of 14.7–898.6 ppm_v were 0.0646 and 0.9909, respectively. A series of molecular simulations have been carried out to calculate bond energy for the water molecule interaction with Ppy, which was found to be 3 kcal/mol indicating the existence of hydrogen bonding during the sorption process. Based on Langmuir isotherm adsorption assumption, for 0.1 and 1 wt.% Ppy films, the association constants were 2606.30 and 5792.98, respectively. This larger association constant for 1 wt.% Ppy film explains higher sensitivity.     

一种测定反应体系压力变化的无汞反应动力学装置

测量反应体系压力变化的装置已有报道,但本文装置具有操作方便、记数准确等优点。 1 实 验 1.1 实验原理及试剂 详见文献。 1.2 装置及仪器 本文的无汞动力学测量装置用于乙炔氢氯化均相催化反应力学研究,其组装图如图1所示。