Emission band shape probes of the mixed-valence excited state properties of polypyridyl-bridged bis-ruthenium(II) complexes

The absorption spectra and emission spectral band shapes of several polypyridine-ligand (PP) bridged bis-ruthenium(II) complexes imply that the Ru(II)/Ru(III) electronic coupling is weak in their lowest energy metal to ligand charge transfer (MLCT) excited states. Many of these PP-bridging ligands contain pyrazine moieties and the weak electronic coupling of the excited states contrasts to the strong electronic coupling inferred for the correlated mixed-valence ground states. Although the bimetallic complexes emit at significantly lower energy than their monometallic analogs, the vibronic contributions to their 77 K emission spectra are much stronger than expected based on comparison to the monometallic analogs (around twofold in some complexes) and this feature is characteristic of bimetallic complexes in which the mixed-valence excited states are electronically localized. The weaker excited state than ground state donor/acceptor electronic coupling in this class of complexes is attributed to PP-mediated super-exchange coupling in which the mediating orbital of the bridging ligand (PP-LUMO) is partly occupied in the MLCT excited states, but is unoccupied in the ground states; therefore, the vertical Ru(III)-PP⁻ (MLCT) energy is larger and the mixing coefficient smaller in these excited states than is found for Ru(II)-PP in the corresponding ground states.     

De novo sequencing of tryptic peptides sulfonated by 4-sulfophenyl isothiocyanate for unambiguous protein identification using post-source decay matrix-assisted laser desorption/ionization mass spectrometry

A simple method of solid-phase derivatization and sequencing of tryptic peptides has been developed for rapid and unambiguous identification of spots on two-dimensional gels using post-source decay (PSD) matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The proteolytic digests of proteins are chemically modified by 4-sulfophenyl isothiocyanate. The derivatization reaction introduces a negative sulfonic acid group at the N-terminus of a peptide, which can increase the efficiency of PSD fragmentation and enable the selective detection of only a single series of fragment ions (y-ions). This chemically assisted method avoids the limitation of high background normally observed in MALDI-PSD spectra, and makes the spectra easier to interpret and facilitates de novo sequencing of internal fragment. The modification reaction is conducted in C(18) microZipTips to decrease the background and to enhance the signal/noise. Derivatization procedures were optimized for MALDI-PSD to increase the structural information and to obtain a complete peptide sequence even in critical cases. The MALDI-PSD mass spectra of two model peptides and their sulfonated derivatives are compared. For some proteins unambiguous identification could be achieved by MALDI-PSD sequencing of derivatized peptides obtained from in-gel digests of phosphorylase B and proteins of hepatic satellite cells (HSC).     

Rapid and sensitive determination of ephedrine and pseudoephedrine by micellar electrokinetic chromatography with on-line regenerating covalent coating

A rapid, sensitive and reproducible micellar electrokinetic chromatographic method using hexamethyldisilazane as on-line regenerating covalent coating was developed for the quantification of ephedrine (E) and pseudoephedrine (PE). E and PE were derivatized with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol for laser-induced fluorescence detection. The on-line regenerating covalent coating formed a combinative double coating with the subsequently produced dynamic SDS coating. The total coating can be easily removed and conveniently regenerated on-line. The simple coating procedure was described. By a series of optimization, a running buffer of 20 mm Na(2)B(4)O(7) + 16 mm SDS was applied for the separation of the derivatives. Linear relationships for E and PE were obtained in the range of 0.044-6.60 microg mL(-1) (correlation coefficients: 0.9975 for E, 0.9981 for PE), and the detection limits for E and PE were 1.71 and 0.67 ng mL(-1), respectively. The separation speed, the reproducibility and the sensitivity were much improved over those of other capillary electrophoresis methods more recently reported. The method was applied to the analysis of the two alkaloids in traditional herbal preparations with recoveries in the range 92.8-104.8%.     

Synthesis and optical resolution of a series of inherently chiral calix[4]crowns with cone and partial cone conformations

A series of inherently chiral calix[4]arenes with cone and partial cone conformations and with crown ether moieties of variable size have been readily synthesized. By taking advantage of the carboxy appendage on the lower rim, these were condensed with the chiral auxiliary (S)-BINOL to form diastereomers which, in most cases, could be separated by preparative TLC, or more desirably, by column chromatography on silica gel (diastereomeric excess >99 % based on HPLC analysis). Seven enantiopure antipodes of inherently chiral calix[4]crowns were obtained after hydrolysis. It has been found that both the size of the crown moiety and alkylation of the last phenolic hydroxy group (accompanied with or without a change in the conformation) affect the separation of the diastereomers.     

Improved modification for the density-functional theory calculation of thermodynamic properties for C-H-O composite compounds

A three-parametric modification equation and the least-squares approach are adopted to calibrating hybrid density-functional theory energies of C(1)-C(10) straight-chain aldehydes, alcohols, and alkoxides to accurate enthalpies of formation DeltaH(f) and Gibbs free energies of formation DeltaG(f), respectively. All calculated energies of the C-H-O composite compounds were obtained based on B3LYP6-311++G(3df,2pd) single-point energies and the related thermal corrections of B3LYP6-31G(d,p) optimized geometries. This investigation revealed that all compounds had 0.05% average absolute relative error (ARE) for the atomization energies, with mean value of absolute error (MAE) of just 2.1 kJ/mol (0.5 kcal/mol) for the DeltaH(f) and 2.4 kJ/mol (0.6 kcal/mol) for the DeltaG(f) of formation.     

Adsorption energy distribution model for VOCs onto activated carbons

An adsorption isotherm model was proposed for two types of volatile organic compounds (VOCs) on a heterogeneous carbon surface. The Langmuir isotherm was used as a local isotherm for describing heterogeneous surfaces to obtain the adsorption energy distribution. The adsorption temperature studied ranged from 30 to 50 degrees C, and the pressure of VOCs varied from 0 to 0.35 atm. The present model differed from previous studies in assuming that the pre-exponential factor was not to be a constant. The pre-exponential factors were determined directly from the experimental data, and the result empirically showed that the pre-exponential factor was correlated with the adsorption energy by a simple exponential function. We found that both adsorption energy distributions of two VOCs were essentially step functions over the restricted pressure range, indicating adsorbates on the carbon surface with its own uniform distribution. By incorporation of the energy distribution and the relationship between the pre-exponential factor and the adsorption energy, the adsorption isotherms for the two VOCs on the carbons can be well predicted.     

Simultaneous determination of polycarboxylic acids by capillary electrophoresis with a copper electrode

The simultaneous determination of polycarboxylic acids including oxalic acid, citric acid, malonic acid, malic acid, tartaric acid, aspartic acid and glutamic acid was achieved by capillary electrophoresis with a copper disk electrode (d = 200 microm). In the system. 0.2 mmol/l cetylpridinium bromide (CPB) was used as an electroosmotic flow (EOF) modifier to reverse the direction of EOF. The effects of the solution pH and CPB concentration on separation were evaluated to achieve the optimum separation conditions. At the working potential of +0.14 V (vs. saturated calomel electrode), the calibration curves for all polycarboxylic acids studied were linear with 2 approximately 3-orders of magnitude and all the detection limits (S/N = 3) were below 15 fmol except malonic acid. Furthermore, the oxalic and citric acids in urine were successfully separated and determined with high sensitivity.     

DOPING LEVEL INCREASE OF POLY(3-METHYLTHIOPHENE)FILM DURING ELECTROCHEMICAL POLYMERIZATION PROCESS

The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have beenelectrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in borontrifluoride diethyl etherate (BFEE) at a constant applied potential of 1.38 V (versus SCE), have been investigated byexcitation with a 633-nm laser beam. The spectroscopic results demonstrated that the doping level of PMeT film wasincreasing during film growth. This finding was also confirmed by electrochemical examination. Moreover, the Raman bandsassigned to radical cations and dications in doped PMeT films were found approximately at 1420 and 1400 cm~(-1),respectively. Radical cations and dications coexist on the backbone of PMeT as conductive species and their concentrationsincrease with the increase of doping level. Successive cyclic voltammetry was proved to be an effective approach toimproving the doping level of as-grown thin compact PMeT film.     

STABILITY OF POLY（N,N＇-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE） MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems, there is an exponential relationship between absorbance and wavelength （A = Kλ^-n）. Here, the exponent n is named as flocculation-coagulation parameter. In the present paper, the effects of different additives on the stability of poly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） microgel dispersion were studied in detail via this parameter. The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups, making the microgel positively charged on its surface. This was confirmed by the measurement of Zeta potential and the result of conductometric titration. The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Synthesis,structure and the e.s.r. spectrum of the mixed-valence molybdovandate Na2(NH4)4[(VIVVV8Mo)O28] · 10H2O

The mixed-valence molybdovanadate compound Na₂(NH₄)₄[V^IVV^V ₈Mo)O₂₈] · 10H₂O [Vanadata(6-)tetradeca--oxotetra-₃-oxodi-₆-oxoheptaoxo(oxomolybdate) nonatetrammonium disodium, decahydrate] has been synthesized from sodium molybdate(VI) dihydrate and sodium metavanadate dihydrate in aqueous solution by adding NH₂OH · HCl. The molecular structure has been determined by X-ray diffraction and is based on the isopolydecavanadate structure. The molybdate atom is crystallographically disordered over 6MO₆ octahedral sites. The e.s.r. spectrum clearly indicates that one vanadium atom has the oxidation number +4.