Hyperpolarized NMR Spectroscopy: d‐DNP,PHIP, and SABRE Techniques

The intensity of NMR signals can be enhanced by several orders of magnitude by using various techniques for the hyperpolarization of different molecules. Such approaches can overcome the main sensitivity challenges facing modern NMR/magnetic resonance imaging (MRI) techniques, whilst hyperpolarized fluids can also be used in a variety of applications in material science and biomedicine. This Focus Review considers the fundamentals of the preparation of hyperpolarized liquids and gases by using dissolution dynamic nuclear polarization (d‐DNP) and parahydrogen‐based techniques, such as signal amplification by reversible exchange (SABRE) and parahydrogen‐induced polarization (PHIP), in both heterogeneous and homogeneous processes. The various new aspects in the formation and utilization of hyperpolarized fluids, along with the possibility of observing NMR signal enhancement, are described.     

15N Hyperpolarization of Dalfampridine at Natural Abundance for Magnetic Resonance Imaging

Signal Amplification by Reversible Exchange (SABRE) is a promising method for NMR signal enhancement and production of hyperpolarized molecules. As nuclear spin relaxation times of heteronuclei are usually much longer than those of protons, SABRE-based hyperpolarization of heteronuclei in molecules is highly important in the context of biomedical applications. In this work, we demonstrate that the SLIC-SABRE technique can be successfully used to hyperpolarize ¹⁵N nuclei in dalfampridine. The high polarization level of ca. 8 % achieved in this work made it possible to acquire ¹⁵N MR images at natural abundance of the ¹⁵N nuclei for the first time.     

Parahydrogen‐Induced Hyperpolarization of Gases

Imaging of gases is a major challenge for any modality including MRI. NMR and MRI signals are directly proportional to the nuclear spin density and the degree of alignment of nuclear spins with applied static magnetic field, which is called nuclear spin polarization. The level of nuclear spin polarization is typically very low, i.e., one hundred thousandth of the potential maximum at 1.5 T and a physiologically relevant temperature. As a result, MRI typically focusses on imaging highly concentrated tissue water. Hyperpolarization methods transiently increase nuclear spin polarizations up to unity, yielding corresponding gains in MRI signal level of several orders of magnitude that enable the 3D imaging of dilute biomolecules including gases. Parahydrogen‐induced polarization is a fast, highly scalable, and low‐cost hyperpolarization technique. The focus of this Minireview is to highlight selected advances in the field of parahydrogen‐induced polarization for the production of hyperpolarized compounds, which can be potentially employed as inhalable contrast agents.     

A large volume flat coil probe for oriented membrane proteins

15N detection of mechanically aligned membrane proteins benefits from large sample volumes that compensate for the low sensitivity of the observe nuclei, dilute sample preparation, and for the poor filling factor arising from the presence of alignment plates. Use of larger multi-tuned solenoids, however, is limited by wavelength effects that lead to inhomogeneous RF fields across the sample, complicating cross-polarization experiments. We describe a 600 MHz 15N-1H solid-state NMR probe with large (580 mm3) RF solenoid for high-power, multi-pulse sequence experiments, such as polarization inversion spin exchange at the magic angle (PISEMA). In order to provide efficient detection for 15N, a 4-turn solenoidal sample coil is used that exceeds 0.27 lambda at the 600 MHz 1H resonance. A balanced tuning-matching circuit is employed to preserve RF homogeneity across the sample for adequate magnetization transfer from 1H to 15N. We describe a procedure for optimization of the shorted 1/4 lambda coaxial trap that allows for the sufficiently strong RF fields in both 1H and 15N channels to be achieved within the power limits of 300 W 1H and 1 kW 15N amplifiers. The 8 x 6 x 12 mm solenoid sustains simultaneous B1 irradiation of 100 kHz at 1H frequency and 51 kHz at 15N frequency for at least 5 ms with 265 and 700 W of input power in the respective channels. The probe functionality is demonstrated by 2D 15N-1H PISEMA spectroscopy for two applications at 600 MHz.     

Heterogeneous Parahydrogen-Induced Polarization of Diethyl Ether for Magnetic Resonance Imaging Applications

Magnetic resonance imaging (MRI) with the use of hyperpolarized gases as contrast agents provides valuable information on lungs structure and function. While the technology of ¹²⁹Xe hyperpolarization for clinical MRI research is well developed, it requires the expensive equipment for production and detection of hyperpolarized ¹²⁹Xe. Herein we present the ¹H hyperpolarization of diethyl ether vapor that can be imaged on any clinical MRI scanner. ¹H nuclear spin polarization of up to 1.3 % was achieved using heterogeneous hydrogenation of ethyl vinyl ether with parahydrogen over Rh/TiO₂ catalyst. Liquefaction of diethyl ether vapor proceeds with partial preservation of hyperpolarization and prolongs its lifetime by ≈10 times. The proof-of-principle 2D ¹H MRI of hyperpolarized diethyl ether was demonstrated with 0.1×1.1 mm² spatial and 120 ms temporal resolution. The long history of use of diethyl ether for anesthesia is expected to facilitate the clinical translation of the presented approach.     

17O quadrupole coupling and chemical shielding tensors in an H-bonded carboxyl group: alpha-oxalic acid

We have used single crystal (17)O NMR and density functional theory to investigate intermolecular interactions in a strongly H-bonded system. The chemical shielding (CS) and quadrupole coupling (QC) tensors are determined in oxalic acid dihydrate by single crystal methods. With cross polarization from abundant protons, high quality spectra are obtained in 1-2 min from 10 micromol samples. In the crystal lattice, oxalic acid is H-bonded directly to the hydrate with each carboxyl group accepting two H-bonds at C=O and donating one H-bond from COH. The effects of these intermolecular interactions on the experimentally determined QC and CS tensors are modeled by density functional theory with a procedure that accurately calculates, without scaling, the known QC tensors in both gas-phase water and ice. The ice calculation uses a cluster containing 42 waters (in excess of two complete hydration shells). The same procedure applied to a similarly constructed cluster of hydrated oxalic acid gives QC and CS tensors that are within 3-6% of the observed values while isolated molecule tensors are significantly different. Comparison of the isolated molecule tensors with those from either experiment or the cluster calculation shows the magnitude and directionality of intermolecular interactions on the tensors. The isotropic shift of the COH oxygen is deshielded by 29 ppm, and C=O is shielded by 62 ppm while the spans of the CS tensors are increased by 78 ppm and decreased by 73 ppm, respectively. Magnitudes of the quadrupole coupling constants, which are proportional to the electric field gradients at the (17)O sites, decrease by 2.2 and 1.2 MHz at COH and C=O, respectively.     

Parahydrogen‐Based Hyperpolarization for Biomedicine

Magnetic resonance (MR) is one of the most versatile and useful physical effects used for human imaging, chemical analysis, and the elucidation of molecular structures. However, its full potential is rarely used, because only a small fraction of the nuclear spin ensemble is polarized, that is, aligned with the applied static magnetic field. Hyperpolarization methods seek other means to increase the polarization and thus the MR signal. A unique source of pure spin order is the entangled singlet spin state of dihydrogen, parahydrogen (pH₂), which is inherently stable and long‐lived. When brought into contact with another molecule, this “spin order on demand” allows the MR signal to be enhanced by several orders of magnitude. Considerable progress has been made in the past decade in the area of pH₂‐based hyperpolarization techniques for biomedical applications. It is the goal of this Review to provide a selective overview of these developments, covering the areas of spin physics, catalysis, instrumentation, preparation of the contrast agents, and applications.     

Single-crystal studies of peptide prolyl and glycyl 15N shielding tensors

15N shielding tensors were determined for the central peptide groups in GGV, AGG, and APG by single-crystal NMR. We find that the angle between the downfield component (delta11) and the N-H or the N-C(delta) (pro) bonds is in the range of 20-23 degrees and in accord with previous solid-state NMR measurements. However, AGG, unlike APG or GGV, has a distorted peptide plane, and delta11 lies approximately in the plane of N, C(alpha), and H rather than in the peptide plane defined by heavy atoms. Accurate orientations of delta22 and delta33 were determined, and the usual assumption that delta22 is along the peptide normal was found only in APG which has a highly nonaxial tensor. More generally, delta22 and delta33 are rotated about the delta11 axis (36 degrees in GGV). These results are compared with DFT calculations to gain a structural understanding of the effects of intermolecular interactions on shielding tensor principal components and orientations. Trimeric clusters containing H-bonded neighbors predict the orientations of the principal components within 2-3 degrees, but calculated principal components are less quantitative. Possible reasons for this disagreement are explored.     

High‐Resolution 3D Proton MRI of Hyperpolarized Gas Enabled by Parahydrogen and Rh/TiO2 Heterogeneous Catalyst

Several supported metal catalysts were synthesized, characterized, and tested in heterogeneous hydrogenation of propene with parahydrogen to maximize nuclear spin hyperpolarization of propane gas using parahydrogen induced polarization (PHIP). The Rh/TiO₂ catalyst with a metal particle size of 1.6 nm was found to be the most active and effective in the pairwise hydrogen addition and robust, demonstrating reproducible results with multiple hydrogenation experiments and stability for ≥1.5 years. 3D ¹H magnetic resonance imaging (MRI) of 1 % hyperpolarized flowing gas with microscale spatial resolution (625×625×625 μm³) and large imaging matrix (128×128×32) was demonstrated by using a preclinical 4.7 T scanner and 17.4 s imaging scan time.