Transformations of gamma-alumina in aqueous suspensions 1. Alumina chemical weathering studied as a function of pH

Hydration of gamma-Al2O3 is often reported to occur via the superficial transformation of the alumina surface into aluminum hydroxide-like layers. However, very little evidence has been given so far to support this hypothesis. It is demonstrated here by X-ray diffraction, TEM, electron diffraction, and solubility studies that a second process of hydration takes place that involves the dissolution of alumina and subsequent precipitation of well-shaped Al(OH)3 particles from supersaturated alumina aqueous solution. This process can be observed on a macroscopic scale (XRD, TEM) for any pH5, provided that the contact time between alumina and water exceeds 10 h. The least thermodynamically stable phase of aluminum hydroxide, bayerite, becomes favored compared with gibbsite when the pH of the solution is increased. It is assumed that the rate of formation of bayerite germs is greater than that of gibbsite due to variations in aluminum speciation in solution as a function of pH.     

Instability and mode transition analysis of a hydrogen-rich combustion in a model afterburner

Combustion instabilities were investigated experimentally for a hydrogen-rich combustion in a model afterburner installed at the end of a high-enthalpy wind tunnel. Air was supplied at 0.3 MPa and 950 K. The combustion instabilities were studied with the time-resolved measurements of a near-infrared (NIR) emission from water molecules over 780 nm using a high-speed video camera. Pressure was also measured in the combustor. The pressure and the NIR images were analyzed by data-driven approach, which include the fast Fourier transform (FFT), the wavelet transform, the dynamic mode decomposition (DMD) and the Gaussian process latent variable methods (GP-LVM). Thermoacoustic instability was observed under a rich condition, and the amplitude of the pressure oscillation was the maximum at the overall equivalence ratio of approximately 2.4 or 2.7 as a result of the FFT. The combustion dynamics were investigated in detail for an experimental run at the equivalence ratio of 2.4. A pressure spectrogram indicated a flame–vortex interaction with a Strouhal number of 0.5 (2300 Hz), thermoacoustic instability (560 Hz), and their transitions with the wavelet transform. For NIR images, the same tendency was also observed in the spectrogram of the modes obtained by the Gabor-filtered DMD, which could clearly resolve the high-order harmonic modes of the flame–vortex interaction and the thermoacoustic instability. Furthermore, NIR images were analyzed with GP-LVM to study the evolution of the combustion dynamics in a three-dimensional latent space. Recurrence plots with the Euclidean distance function were used to visualize the evolutions of the combustion dynamics. A limit cycle behavior of the flame–vortex interaction was clearly observed, whereas the limit cycle of the thermoacoustic instability showed more complicated behaviors. The transition behaviors of the instabilities were observed in the recurrence plots in detail, indicating that the flame–vortex interaction excited the fourth harmonic mode of the thermoacoustic instability, followed by the basic mode.     

Quantifying the Interactions in the Aggregation of Thermoresponsive Polymers: The Effect of Cononsolvency

The aggregation kinetics of thermoresponsive core–shell micelles with a poly(N‐isopropyl acrylamide) shell in pure water or in mixtures of water with the cosolvents methanol or ethanol at mole fractions of 5% is investigated during a temperature jump across the respective cloud point. Characteristically, these mixtures give rise to cononsolvency behavior. At the cloud point, aggregates are formed, and their growth is followed with time‐resolved small‐angle neutron scattering. Using the reversible association model, the interaction potential between the aggregates is determined from their growth rate in dependence on the cosolvents. The effect of the cosolvent is attributed to the interaction potential on the structured layer of hydration water around the aggregates. It is surmised that the latter is perturbed by the cosolvent and thus the residual repulsive hydration force between the aggregates is reduced. The larger the molar volume of the cosolvent, the more pronounced is the effect. This framework provides a molecular‐level understanding of solvent‐mediated effective interactions in polymer solutions and new opportunities for the rational control of self‐assembly in complex soft matter systems.

     

A Binuclear Gold(I) Complex with Mixed Bridging Diphosphine and Bis(N‐Heterocyclic Carbene) Ligands Shows Favorable Thiol Reactivity and Inhibits Tumor Growth and Angiogenesis In Vivo

In the design of anticancer gold(I) complexes with high in vivo efficacy, tuning the thiol reactivity to achieve stability towards blood thiols yet maintaining the thiol reactivity to target cellular thioredoxin reductase (TrxR) is of pivotal importance. Herein we describe a dinuclear gold(I) complex ( 1 ‐PF₆) utilizing a bridging bis(N‐heterocyclic carbene) ligand to attain thiol stability and a diphosphine ligand to keep appropriate thiol reactivity. Complex 1 ‐PF₆ displays a favorable stability that allows it to inhibit TrxR activity without being attacked by blood thiols. In vivo studies reveal that 1 ‐PF₆ significantly inhibits tumor growth in mice bearing HeLa xenograft and mice bearing highly aggressive mouse B16‐F10 melanoma. It inhibits angiogenesis in tumor models and inhibits sphere formation of cancer stem cells in vitro. Toxicology studies indicate that 1 ‐PF₆ does not show systemic anaphylaxis on guinea pigs and localized irritation on rabbits.     

Helical Packing of Nanoparticles Confined in Cylindrical Domains of a Self‐Assembled Block Copolymer Structure

Theoretical models predict that a variety of self‐assembled structures of closely packed spherical particles may result when they are confined in a cylindrical domain. In the present work we demonstrate for the first time that the polymer‐coated nanoparticles confined in the self‐assembled cylindrical domains of a block copolymer pack in helical morphology, where we can isolate individual fibers filled with helically arranged nanoparticles. This finding provides unique possibilities for fundamental as well as application‐oriented research in similar directions.     

Luminescent Cyclometalated Platinum(II) Complex Forms Emissive Intercalating Adducts with Double‐Stranded DNA and RNA: Differential Emissions and Anticancer Activities

Luminescent metallo‐intercalators are potent biosensors of nucleic acid structure and anticancer agents targeting DNAs. There are few examples of luminescent metallo‐intercalators which can simultaneously act as emission probes of nucleic acid structure and display promising anticancer activities. Herein, we describe a luminescent platinum(II) complex, [Pt(C^N^N)(C≡NtBu)]ClO₄ ( 1 a , HC^N^N= 6‐phenyl‐2,2′‐bipyridyl), that intercalates between the nucleobases of nucleic acids, accompanied by an increase in emission intensity and/or a significant change in the maximum emission wavelength. The changes in emission properties measured with double‐stranded RNA (dsRNA) are different from those with dsDNA used in the binding reactions. Complex 1 a exhibited potent anticancer activity towards cancer cells in vitro and inhibited tumor growth in a mouse model. The stabilization of the topoisomerase I–DNA complex with resulting DNA damage by 1 a is suggested to contribute to its anticancer activity.     

Design of Amphiphilic Peptide Geometry towards Biomimetic Self‐Assembly of Chiral Mesoporous Silica

In nature, diatoms and sponges are exquisite examples of well‐defined structures produced by silica biomineralisation, in which proteins play an important role. However, the artificial peptide templating route for the silica mesostructure remains a formidable and unsolved challenge. Herein, we report our effort on the design of amphiphilic peptides for synthesising a highly ordered two‐dimensional (2D)‐hexagonal and lamellar chiral silica mesostructure using trimethoxysilylpropyl‐N,N,N‐trimethylammonium chloride as the co‐structure directing agent (CSDA). The geometry of the peptide was designed by adding proline residues into the hydrophobic chain of the peptide to break the β‐sheet conformation by weakening the intermolecular hydrogen bonds; this led to the mesophase transformation from the most general lamellar structure to the 2D hexagonal P6mm mesostructure by increasing the amphiphilic molecules packing parameter g. Enantiomerically pure chiral mesostructures were formed thanks to the intrinsic chirality and relatively strong intermolecular hydrogen bonds of peptides.     

Water‐Soluble Luminescent Cyclometalated Gold(III) Complexes with cis‐Chelating Bis(N‐Heterocyclic Carbene) Ligands: Synthesis and Photophysical Properties

A new class of cyclometalated Au^III complexes containing various bidentate C‐deprotonated C^N and cis‐chelating bis(N‐heterocyclic carbene) (bis‐NHC) ligands has been synthesized and characterized. These are the first examples of Au^III complexes supported by cis‐chelating bis‐NHC ligands. [Au(C^N)(bis‐NHC)] complexes display emission in solutions under degassed condition at room temperature with emission maxima (λ_max) at 498–633 nm and emission quantum yields of up to 10.1 %. The emissions are assigned to triplet intraligand (IL) π→π* transitions of C^N ligands. The Au^III complex containing a C^N (C‐deprotonated naphthalene‐substituted quinoline) ligand with extended π‐conjugation exhibits prompt fluorescence and phosphorescence of comparable intensity with λ_max at 454 and 611 nm respectively. With sulfonate‐functionalized bis‐NHC ligand, four water‐soluble luminescent Au^III complexes, including those displaying both fluorescence and phosphorescence, were prepared. They show similar photophysical properties in water when compared with their counterparts in acetonitrile. The long phosphorescence lifetime of the water‐soluble AuIII complex with C‐deprotonated naphthalene‐substituted quinoline ligand renders it to function as ratiometric sensor for oxygen. Inhibitory activity of one of these water‐soluble Au^III complexes towards deubiquitinase (DUB) UCHL3 has been investigated; this complex also displayed a significant inhibitory activity with IC₅₀ value of 0.15 μM .     

Ketimido Metallophthalocyanines: An Approach to Phthalocyanine‐Supported Mononuclear High‐Valent Ruthenium Complexes

A “metal–ketimine+ArI(OR)₂” approach has been developed for preparing metal–ketimido complexes, and ketimido ligands are found to stabilize high‐valent metallophthalocyanine (M? Pc) complexes such as ruthenium(IV) phthalocyanines. Treatment of bis(ketimine) ruthenium(II) phthalocyanines [Ru^II(Pc)(HN?CPh₂)₂] ( 1a ) and [Ru^II(Pc)(HNQu)₂] ( 1b ; HNQu=N‐phenyl‐1,4‐benzoquinonediimine) with PhI(OAc)₂ affords bis(ketimido) ruthenium(IV) phthalocyanines [Ru^IV(Pc)(N?CPh₂)₂] ( 2a ) and [Ru^IV(Pc)(NQu)₂] ( 2b ), respectively. X‐ray crystal structures of 1b and [Ru^II(Pc)(PhN?CHPh)₂] ( 1c ) show Ru? N(ketimine) distances of 2.075(4) and 2.115(3) Å, respectively. Complexes 2a , 2b readily revert to 1a , 1b upon treatment with phenols. ¹H NMR spectroscopy reveals that 2a , 2b are diamagnetic and 2b exists as two isomers, consistent with a proposed eclipsed orientation of the ketimido ligands in these ruthenium(IV) complexes. The reaction of 1a , 1b with PhI(OAc)₂ to afford 2a , 2b suggests the utility of ArI(OR)₂ as an oxidative deprotonation agent for the generation of high‐valent metal complexes featuring M? N bonds with multiple bonding characters. DFT and time‐dependent (TD)‐DFT calculations have been performed on the electronic structures and the UV/Vis absorption spectra of 1b and 2b , which provide support for the diamagnetic nature of 2b and reveal a significant barrier for rotation of the ketimido group about the Ru? N(ketimido) bond.     

Luminescent Palladium(II) Complexes with π‐Extended Cyclometalated [RC^N^NR′] and Pentafluorophenylacetylide Ligands: Spectroscopic,Photophysical, and Photochemical Properties

A series of cyclometalated Pd^II complexes that contain π‐extended R? C^N^N? R′ (R? C^N^N? R′=3‐(6′‐aryl‐2′‐pyridinyl)isoquinoline) and chloride/pentafluorophenylacetylide ligands have been synthesized and their photophysical and photochemical properties examined. The complexes with the chloride ligand are emissive only in the solid state and in glassy solutions at 77 K, whereas the ones with the pentafluorophenylacetylide ligand show phosphorescence in the solid state (λ_max=584–632 nm) and in solution (λ_max=533–602 nm) at room temperature. Some of the complexes with the pentafluorophenylacetylide ligand show emission with λ_max at 585–602 nm upon an increase in the complex concentration in solutions. These Pd^II complexes can act as photosensitizers for the light‐induced aerobic oxidation of amines. In the presence of 0.1 mol % Pd^II complex, secondary amines can be oxidized to the corresponding imines with substrate conversions and product yields up to 100 and 99 %, respectively. In the presence of 0.15 mol % Pd^II complex, the oxidative cyanation of tertiary amines could be performed with product yields up to 91 %. The Pd^II complexes have also been used to sensitize photochemical hydrogen production with a three‐component system that comprises the Pd^II complex, [Co(dmgH)₂(py)Cl] (dmgH=dimethylglyoxime; py=pyridine), and triethanolamine, and a maximum turnover of hydrogen production of 175 in 4 h was achieved. The excited‐state electron‐transfer properties of the Pd^II complexes have been examined.