Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (O_vac) at the surface of BiVO₄ photoanode, by 10‐minute photoetching. This strategy could induce enriched O_vac at the surface of BiVO₄, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO₄ /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO₄ with enriched surface O_vac presents the highest photocurrent among undoped BiVO₄ photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO₄ photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm^?2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO₄ photoanode and a Si photocathode under 1 sun illumination.     

Electrochemical Difunctionalization of Alkenes by a Four‐Component Reaction Cascade Mumm Rearrangement: Rapid Access to Functionalized Imides

An electrochemical four‐component reaction cascade Mumm rearrangement was developed. It is a rare example of in situ generation of O‐acyl isoamides for 1,3‐(O→N) acyl transfer. Inexpensive, commercially available arylethylenes, aryl or heterocyclic acids, acetonitrile, and alcohols were used as substrates. A wide range of aryl acids and alcohols were tolerated and provided imides in satisfactory yields. Subsequent hydrolysis of imides could be utilized to synthesize valuable amides and β‐amino alcohol derivatives.     

pH计检定仪期间核查方法

介绍pH计检定仪的4种期间核查方法:传递比较法、多台对比法、留样测量法、实验室间比对法。传递比较法能直接反应pH计检定仪的变化,适用于已建立pH计检定仪检定装置的单位;多台对比法与留样测量法方便、快捷,可操作性强,适合大多数单位进行pH计检定仪的期间核查;实验室间比对法对设备要求较低,但需要协调的单位较多,周期较长,费用较高,实用性差。     

Solid-Solution Effect on Grain Boundary Character Distribution and Corrosion Resistance of 304 Stainless Steel

Russian Journal of Electrochemistry - In this study, we focus on the effect of solid-solution treatment on the susceptibility to intergranular corrosion and electrochemical corrosion of 304...     

Wearable Multiparameter Platform Based on AlGaN/GaN High‐electron‐mobility Transistors for Real‐time Monitoring of pH and Potassium Ions in Sweat

Biosensors based on field‐effect transistor (FET) structures have attracted considerable attention because they offer rapid, inexpensive parallel sensing and ultrasensitive label‐free detection. However, long‐term repeatable detection cannot be performed, and Ag/AgCl reference electrode design is complicated, which has hindered FET biosensors from becoming truly wearable health‐monitoring platforms. In this paper, we propose a novel wearable detection platform based on AlGaN/GaN high‐electron‐mobility transistors (HEMTs). In this platform, a sweatband was used to continuously collect sweat, and a pH detecting unit and a potassium ion detecting unit were formed by modifying different sensitive films to realize the long‐term stable and repeatable detection of pH and potassium ions. Experimental data show that the wearable detection platform based on AlGaN/GaN HEMTs has good sensitivity (pH 3–7 sensitivity is 45.72 μA/pH; pH 7.4–9 sensitivity is 51.073 μA/pH; and K⁺ sensitivity is 4.94 μA/lgα_K⁺), stability (28 days) and repeatability (the relative standard deviation (RSD) of pH 3–7 sensitivity is 2.6 %, the RSD of pH 7.4–9 sensitivity is 2.1 %, and the RSD of K⁺ sensitivity is 7.3 %). Our newly proposed wearable platform has excellent potential for predictive analytics and personalized medical treatment.     

Facile preparation of polyethylene glycol/wood-flour composites as form-stable phase change materials for thermal energy storage

Journal of Thermal Analysis and Calorimetry - The polyethylene glycol/wood-flour (PEG/WF) composites were synthesized as novel form-stable phase change materials (PCMs) using PEG as phase change...     

Combustion behavior and thermal stability of TPU composites based on layered yttrium hydroxides and graphene oxide

Journal of Thermal Analysis and Calorimetry - Layered yttrium hydroxides (LYH)- and graphene oxide (GO)-supported layered yttrium hydroxides (GO–LYH) were synthesized by a co-precipitation...     

Heating performance enhancement for a road unit by using sectorial-finned pipe

Journal of Thermal Analysis and Calorimetry - This study proposes a sectorial-finned pipe in the hydronic road heating system with a three-dimensional road model to enhance the road heating...     

Thermal performances of porous snow by a hydronic heating system at different weather conditions

Journal of Thermal Analysis and Calorimetry - The snow on the road in the cold regions is easy to cause slippery conditions, which are dangerous for vehicles and people. To remove the slippery...     

Switchable Polymerization Triggered by Fast and Quantitative Insertion of Carbon Monoxide into Cobalt–Oxygen Bonds

A strategy that uses carbon monoxide (CO) as a molecular trigger to switch the polymerization mechanism of a cobalt Salen complex [salen=(R,R)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine] from ring‐opening copolymerization (ROCOP) of epoxides/anhydrides to organometallic mediated controlled radical polymerization (OMRP) of acrylates is described. The key phenomenon is a rapid and quantitative insertion of CO into the Co?O bond, allowing for in situ transformation of the ROCOP active species (Salen)Co^III‐OR into the OMRP photoinitiator (Salen)Co^III‐CO₂R. The proposed mechanism, which involves CO coordination to (Salen)Co^III‐OR and subsequent intramolecular rearrangement via migratory insertion has been rationalized by DFT calculations. Regulated by both CO and visible light, on‐demand sequence control can be achieved for the one‐pot synthesis of polyester‐b‐polyacrylate diblock copolymers (?<1.15).