Synthesis, structure and properties of delocalized transition metal chelates: Diazoketiminato chelates of Co(III) and Pt(II)

The reactions of HL 1 [where HL is 1N-(2-pyridyl-2-methyl)-2-arylazoaniline and is formulated as ArN = NC₆H₄N(H)(CH₂C₅H₄N); Ar = C₆H₅ (for HL¹) or p-MeC₆H₄ (for HL²) or p-ClC₆H₄ (for HL³)] with K₂PtCl₄ and Co(ClO₄)₃ · 6H₂O afforded the (L)PtCl and [(L)₂Co]ClO₄ complexes, respectively. The HL ligands bind the platinum(II) and cobalt(III) centres in a tridentate (N,N,N) fashion, forming new diazoketiminato chelates upon dissociating the amino proton. The X-ray structures of (L³)PtCl and [(L³)₂Co]ClO₄ were determined. Redox properties of the new complexes have been examined.     

A new chelating resin containing 2-aminothiophenol: Synthesis characterization and determination of mercury in waste water using <Superscript>203</Superscript>Hg radiotracer

A new stable chelating resin was synthesized by incorporating 2-aminothiophenol into Merrifield polymer through C-N covalent bond and characterized by elemental analysis, IR and thermal study. The sorption capacity of the newly formed resin for Hg²⁺ as a function of pH has been studied using ²⁰³Hg radioisotope. The resin exhibits no affinity to alkali or alkaline earth metal ions and common anions. The separation of mercury(II) in presence of different alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), common anions (ClO₄ ⁻, SO₄ ²⁻) and other diverse ions (Ag⁺, Cu²⁺, Pb²⁺, Fe³⁺, Ni²⁺ and Zn²⁺) has been checked. In column operation it has been observed that Hg²⁺ content of the waste water can be removed at usual pH of natural water. Mercury was determined by isotope dilution method and the concentration of Hg²⁺ in the waste water spiked with ²⁰³Hg was found to be 0.05 to 0.09 μg/ml.     

Simple Chemical Route Synthesis of Fe2O3 Nanoparticles and its Application for Adsorptive Removal of Congo Red from Aqueous Media: Artificial Neural Network Modeling

Nanocrystalline Fe₂O₃ powder was synthesized by a simple chemical route involving FeCl₃ and NaOH. The Fe₂O₃ powder thus prepared was characterized using x-ray diffraction study, scanning electron microscopy, and Fourier transform infrared spectroscopy. The adsorption properties of crystalline Fe₂O₃ powder have been investigated with an aim to explore a possible low cost and efficient way to remove Congo red (CR) from waste water. Fe₂O₃ powder was found as an excellent adsorbent for CR from aqueous medium. Adsorption capacity as much as 203.66 mg g^?1 is reported at room temperature. Effect of different experimental parameters such as reaction pH, initial CR dye concentration, adsorbent dose, and reaction temperature were studied on adsorption capacity of Fe₂O₃ powder and modeled by artificial neural network (ANN). Optimal ANN structure (4–5–1) shows minimum mean squared error (MSE) of 0.00235 and determination coefficient (R²) of 0.991 with Levenberg–Marquardt algorithm. Isotherm analysis of experimental data exhibited better fit to the Langmuir isotherm. The adsorption process was found to follow second-order kinetics as depicted by the analysis of experimental results. Thermodynamic study shows that the adsorption process is endothermic, spontaneous, and thermodynamically favorable in the temperature range of 27°C to 60°C.     

A polyaniline-containing filter paper that acts as a sensor, acid, base, and endpoint indicator and also filters acids and bases

In this paper we report a new idea for synthesizing polyaniline in an ordinary filter paper. The synthesis was carried out by a process in which aqueous acidic aniline solution and the oxidizing agent H(2)O(2) was added to the paper drop by drop and in sequence. Uniform polymerization could be obtained with the addition of reagents in either sequence. The polymer formation led to a green coloration of the paper. Formation of the emeraldine salt of polyaniline was confirmed by UV-vis and FTIR spectroscopy. Scanning electron microscopic measurements were made for surface characterization of the polymer formed in the paper. The same paper was used as a sensor for ammonia in vapor and in solution, for acid and base as well as endpoint indication, and also to filter acids and bases. We found that, using the polymer-containing paper, ammonia concentrations in a solution as low as 14 ppm could be measured.     

Au nanoparticles and polyaniline coated resin beads for simultaneous catalytic oxidation of glucose and colorimetric detection of the product

In this letter, we report the synthesis of Au nanoparticles (NPs) and polyaniline (PANI) on the same cation-exchange resin beads and demonstrate their use in catalyzing the oxidation of glucose to gluconic acid by Au NPs and simultaneously in detecting the formation of the acid by the color change of PANI. The synthesis was carried out by exchanging the cations of the resins with HAuCl4 and anilinuium chloride and then reducing the metal ions by NaBH4 to produce Au NPs followed by polymerization of aniline using H2O2. The green emeraldine salt form of PANI thus obtained was treated with NaOH to be converted to blue emeraldine base before use. The deposition of Au NPs was confirmed by a change in color of the bead, visible spectroscopy, X-ray diffraction, and scanning electron microscopic measurements. On the other hand, the presence of PANI was confirmed by Fourier transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectroscopy. The formation of gluconic acid from glucose was confirmed by FTIR spectroscopy. We could detect the presence of glucose of a minimum 1.0 mM concentration in water, using the present method. Our experimental observations demonstrate the possibility of the incorporation of multifunctional components on the surfaces of resins for carrying out a chemical reaction as well as detection of the product.     

Photocatalytic polypyrrole-TiO2-nanoparticles composite thin film generated at the air-water interface

Herein, we report a new method of generation of TiO(2) nanoparticles (NPs) incorporated thin films of polypyrrole (PPy) at the air-water interface. Aqueous TiO(2) NPs when treated with H(2)O(2) and left in a chamber of pyrrole vapor resulted in the formation of a film at the interface, in addition to bulk precipitate. Spectroscopic, X-ray diffraction, and electron microscopic measurements establish the formation of a thin film of PPy with the incorporation of TiO(2) NPs. The TiO(2)-containing PPy films when transferred onto glass substrates were able to photo catalyze the decomposition of aqueous organic dyes: methyl orange and methylene blue. Further, these films could also photo catalyze the oxidation of iodide to triiodide ions in aqueous potassium iodide solution. We find that the PPy-TiO(2) composite films catalyze the reactions in the presence of light more efficiently than a suspension of TiO(2) NPs.     

Differential-pulse anodic-stripping voltammetric determination of traces of lead in high-purity copper after its separation by ion exchange

Trace amounts of lead in copper can be determined by differential-pulse anodic-stripping voltammetry after separating it from the matrix. Lead was quantitatively retained on a small Dowex 1-X4 ion-exchange column, without retaining copper when present as a copper-amine complex in solutions containing 0.2 M sodium hydroxide. Subsequent desorption was done with 2 M nitric acid. After deposition for 1 min on a hanging mercury drop electrode and subsequent stripping, the limit of detection was 2 ng ml^?1 and the limit of quantification was 6.6 ng ml^?1. Recoveries of lead were checked by standard addition to copper solution.     

Role of solvent in the compatibility of a vinylchloride–vinylacetate–maleic acid terpolymer and nitrocellulose blends

The compatibility of cast films of a vinylchloride–vinylacetate–maleic acid terpolymer (VMCH) and nitrocellulose (NC) blends is influenced by solvents. Transparent films of VMCH/NC blends are obtained when cast from solvents such as tetrahydrofuran or cyclohexanone, whereas hazy films are obtained when cast from solvents such as acetone or ethylacetate. Visible spectroscopy and phase morphology were used to analyse the compatibility–incompatibility of the blend. Differential scanning calorimetry (DSC) studies demonstrate that the transparent film is compatible, but the hazy film is incompatible. Fourier transform infra-red (FTIR) studies establish that a greater interaction is observed between the polymer pair in case of the compatible blend than in the case of the incompatible blend. A solvent dependency of blend compatibility is reflected in this study. The conformational state of the polymers in solution, which is responsible for the compatibility phenomena, may depend on the donor number and/or Taft-β value of the solvent. The greater the donor number and/or the Taft-β value, the higher may be the level of interaction between the solvent and the polymer molecules, which in turn may give a compatible blend after removal of the solvent.