Syntheses and Structures of Two New Cu/Nb/pyrazine Complexes: Three dimensional CuNb(pyz)2OF5 · (pyz)(H2O) and two dimensional [Cu(pyz)2.5]+ [NbF6]− · (pyz)

Crystals of CuNb(pyz)₂OF₅ · (pyz)(H₂O) ( 1 ) and [Cu(pyz)_2.5]⁺ [NbF₆]^? · (pyz) ( 2 ) were grown (150°C and autogeneous pressures) from CuO, 1/2(Nb₂O₅), (HF)_x · pyridine, and H₂O in excess pyrazine. Light blue single crystals of ( 1 ) are orthorhombic, crystallizing in space group Cccm (No. 66), with a = 14.547(1) Å, b = 16.135(2) Å, c = 13.803(2) Å, and Z = 8. The structure of ( 1 ) contains corner shared [Cu(pyz)_4/2F_2/2]⁺, [Cu(pyz)_4/2O_2/2], and [NbF₄O_1/2F_1/2]^?0.5 octahedra. Orange crystals of ( 2 ) are monoclinic, crystallizing in space group C2/c (No. 15), with a = 11.792(8) Å, b = 17.123(3) Å, c = 17.051(5) Å, β = 90.04(4)°, and Z = 8. The structure of ( 2 ) contains puckered rings of corner shared [Cu(pyz)(pyz)_3/2]⁺ tetrahedra and isolated [NbF₆]^? anions within the rings.     

Frustrated beta-chloride elimination. Selective arene alkylation by alpha-chloronorbornene catalyzed by electrophilic metallocenium ion pairs

Single-site polymerization catalysts generated in situ via activation of Cp*MMe(3) (Cp* = C(5)Me(5); M = Ti, Zr), (CGC)MMe(2) (CGC = C(5)Me(4)SiMe(2)NBu(t)(); M = Ti, Zr), and Cp(2)ZrMe(2) with Ph(3)C(+)B(C(6)F(5))(4)(-) catalyze alkylation of aromatic molecules (benzene, toluene) with alpha-chloronorbornene at room temperature, to regioselectively afford the 1:1 addition products exo-1-chloro-2-arylnorbornane (aryl = C(6)H(5) (1a), C(6)H(4)CH(3) (1b)) in good yields. Analogous deuterium-labeled products exo-1-chloro-2-aryl-d(n)-norbornane-7-d(1) (aryl-d(n) = C(6)D(5) (1a-d(6)), C(6)D(4)CD(3) (1b-d(8))) are obtained via catalytic arylation of alpha-chloronorbornene in either benzene-d(6) or toluene-d(8). Isolated ion-pair complexes such as (CGC)ZrMe(toluene)(+)B(C(6)F(5))(4)(-) and Cp(2)ThMe(+)B(C(6)F(5))(4)(-) also catalyze the reaction of alpha-chloronorbornene in toluene-d(8) to give 1b-d(8) in good yields, respectively. Small quantities of the corresponding bis(1-chloronorbornyl)aromatics 2 are also obtained from preparative-scale reactions. These reactions exhibit turnover frequencies exceeding 120 h(-1) (for the Cp*TiMe(3)/Ph(3)C(+)B(C(6)F(5))(4)(-)-catalyzed system), and chlorine-free products are not observed. Compounds 1 and 2 were characterized by (1)H, (2)H, (13)C, and 2D NMR, GC-MS, and elemental analysis. The aryl group exo-stereochemistry in 1a and 1b is established using (1)H-(1)H COSY, (1)H-(13)C HMBC, and (1)H-(1)H NOESY NMR, and is further corroborated by X-ray analysis of the product 1,4-bis(exo-1-chloro-2-norbornyl)benzene (2a). Control experiments and reactivity studies on each component step suggest a mechanism involving participitation of the metal electrophiles in the catalytic cycle.     

Is bismuth subsalicylate an effective nontoxic catalyst for plga synthesis?

Poly(d,l ‐lactide‐co‐glycolide) (PLGA) copolyesters are commonly used in biomedical applications. Researches were carried out on nontoxic or low‐toxic catalysts that are enough efficient to provide short polymerization times, adequate microstructure chains and similar properties than the commercial PLGA materials. In this study, PLGA were synthesized by ring‐opening copolymerization (ROP) using three different catalysts. Stannous octoate is the first catalyst we used, as it is very efficient, even its toxicity is still on debate. Two others low‐toxic catalysts [zinc lactate and bismuth subsalicylate (BiSS)] were also evaluated. The comparison of these ROP was realized in terms of kinetics and control of the polymerization. Then, the influence of the catalyst on the PLGA microstructure chains is reported. Finally, abiotic hydrolytic degradation rate is studied. Results described in this article show that BiSS is one very attractive catalyst to produce low toxic PLGA for biomedical applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1130–1138     

Dual Electroactivity in a Covalent Organic Network with Mechanically Interlocked Pillar[5]arenes

The synthesis and characterization of a polyrotaxanated covalent organic network (CON) based on the association between the viologen and pillar[5]arene (P[5]OH) units are reported. The mechanical bond allows for the irreversible insertion of n-type redox centers (P[5]OH macrocycles) within a pristine structure based on p-type viologen redox centers. Both redox units are active on a narrow potential range and, in water, the presence of P[5]OH greatly increases the electroactivity of the material.     

Influence of Equilibration Time in Solution on the Inclusion/Exclusion Topology Ratio of Host–Guest Complexes Probed by Ion Mobility and Collision‐Induced Dissociation

Host–guest complexes are formed by the creation of multiple noncovalent bonds between a large molecule (the host) and smaller molecule(s) or ion(s) (the guest(s)). Ion‐mobility separation coupled with mass spectrometry nowadays represents an ideal tool to assess whether the host–guest complexes, when transferred to the gas phase upon electrospray ionization, possess an exclusion or inclusion nature. Nevertheless, the influence of the solution conditions on the nature of the observed gas‐phase ions is often not considered. In the specific case of inclusion complexes, kinetic considerations must be taken into account beside thermodynamics; the guest ingression within the host cavity can be characterized by slow kinetics, which makes the complexation reaction kinetically driven on the timescale of the experiment. This is particularly the case for the cucurbituril family of macrocyclic host molecules. Herein, we selected para‐phenylenediamine and cucurbit[6]uril as a model system to demonstrate, by means of ion mobility and collision‐induced dissociation measurements, that the inclusion/exclusion topology ratio varies as a function of the equilibration time in solution prior to the electrospray process.     

Chemoselective Polymerization Control: From Mixed‐Monomer Feedstock to Copolymers

A novel chemoselective polymerization control yields predictable (co)polymer compositions from a mixture of monomers. Using a dizinc catalyst and a mixture of caprolactone, cyclohexene oxide, and carbon dioxide enables the selective preparation of either polyesters or polycarbonates or copoly(ester‐carbonates). The selectivity depends on the nature of the zinc–oxygen functionality at the growing polymer chain end, and can be controlled by the addition of exogeneous switch reagents.     

An Aldehyde Responsive,Cleavable Linker for Glucose Responsive Insulins

A glucose responsive insulin (GRI) that responds to changes in blood glucose concentrations has remained an elusive goal. Here we describe the development of glucose cleavable linkers based on hydrazone and thiazolidine structures. We developed linkers with low levels of spontaneous hydrolysis but increased level of hydrolysis with rising concentrations of glucose, which demonstrated their glucose responsiveness in vitro. Lipidated hydrazones and thiazolidines were conjugated to the LysB29 side-chain of HI by pH-controlled acylations providing GRIs with glucose responsiveness confirmed in vitro for thiazolidines. Clamp studies showed increased glucose infusion at hyperglycemic conditions for one GRI indicative of a true glucose response. The glucose responsive cleavable linker in these GRIs allow changes in glucose levels to drive the release of active insulin from a circulating depot. We have demonstrated an unprecedented, chemically responsive linker concept for biopharmaceuticals.     

Misparametrization subsets for penalized least squares model selection

Identifying a model by the penalized contrast procedure, we give an analytical estimation of misfitting subsets in the specific case of a least squares contrast. Then, specifying the statistical model, this allows to determine penalization rates ensuring a consistent identification. Applications are given to time series and geostatistical identification.     

An Exceptionally Stable and Scalable Sugar–Polyolefin Frank–Kasper A15 Phase

“One-component” soft material Frank–Kasper (FK) phases are an intriguing structural form of matter that possess periodically ordered structures arising from the self-reconfiguration and close packing of an initial assembly of identical “deformable” spheres into two or more size- or shape-distinct sets of particles. Significant challenges that must still be addressed to advance the field of soft matter FK phases further, however, include their rare and unpredictable occurrence, uncertain mechanisms of solid-state assembly, and low thermodynamic stability. Here we show that a readily-accessible sugar–polyolefin conjugate quantitatively produces an exceptionally stable solid-state FK A15 phase through a rapid and irreversible thermotropic order–order transition, which contrary to other prevailing proposed mechanisms, does not require mass transfer between particles or large structural reorganization in the bulk to establish unit cell non-equivalency. Our results provide the basis for a realistic strategy for obtaining practical and scalable quantities of a diverse range of sugar–polyolefin FK A15 phases with unique intrinsic physical properties and chemical reactivities not previously seen in such systems.     

Copper-Photocatalyzed Borylation of Organic Halides under Batch and Continuous-Flow Conditions

The copper-photocatalyzed borylation of aryl, heteroaryl, vinyl and alkyl halides (I and Br) was reported. The reaction proceeded using a new heteroleptic Cu complex under irradiation with blue LEDs, giving the corresponding boronic-acid esters in good to excellent yields. The reaction was extended to continuous-flow conditions to allow an easy scale-up. The mechanism of the reaction was studied and a mechanism based on a reductive quenching (Cu^I/Cu^I*/Cu⁰) was suggested.