Synthesis of 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines

The reaction of 1,2-diaminobenzenes with substituted 1,2-dibenzoyl-1,2-dibromoethanes constitutes a convenient synthetic route to the hitherto 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines. Structures of all products were elucidated by ir, ¹H and ¹³C-nmr, mass spectra data. X-Ray crystallography data confirm assigned structures.     

Thermal conductivity measurements on ferrofluids

The thermal conductivity of a number of ferrofluids consisting of colloidally dispersed Fe₃O₄ particles in diester, hydrocarbon, water and fluorcarbon carriers have been measured at 38°C. The variation in thermal conductivity with particle concentration is well described by Tareef's equation (1940). This has enabled the ratio of the physical to magnetic size to be determined and compared with estimates of the ratio obtained from electron micrographs and magnetic measurements.The fit between theory and experiment is particularly good for hydrocarbon carrier fluids giving the ratio of solid to magnetic radiusR _i/R _m=1.24±0.03 compared with the value obtained from magnetic data and electron micrographs of 1.19±0.07. The corresponding value from the fluids with a diester carrier ranges between 1.1<R _d/R _m<1.3 which is again consistent with microscopy and magnetic data.The application of a magnetic field of 0.1 T had no noticeable effect on the thermal conductivities of ferrofluids.     

Reactions of some fluoroaromatics with the ethoxide anion

The reactions of sodium ethoxide in ethanol with various fluoroaromatics, C₆F_6?nH_n, C₆F_5?nH_nNO₂, C₆F₅X (X = CF₃, C₆F₅, COCH₃, CH₂Br), C₆Cl₆ and $\text{m}$H₂C₆Cl₄ have been studied. Partial substitution of the aromatic halogen was observed. The new products have been characterized by elemental analysis, NMR (H?1 and F?19), infrared and mass spectroscopy.     

Synthesis,purification and spectroscopic characterization of potential impurities of hexamethylmelamine

The syntheses and spectroscopic properties (ir, ¹H nmr, ¹³C nmr, uv and ms) of pure samples of 2-chloro-4,6-bis(dimethylamino)-s-triazine 1 , 4,6-dichloro-2-dimethylamino-s-triazine 2 , 4,6-bis(dimethylamino)-s-triazin-2(lH)-one 3 , 4-chloro-6-dimethylamino-s-triazin-2(1H)-one 4 , 6-dimethylamino-s-triazine-2,4(1H,3H)-dione 5 , and 2,4,6-tris(dimethylamino)-s-triazine (altretamine, HMM) are reported. Evidence for enol-keto equilibria are also presented for 3 , in which the enol form exhibits as an H-bonded dimer structure similar to the dimer of organic carboxylic acids.     

DNA-nanotube artificial ion channels

There is considerable interest in developing chemical devices that mimic the function of biological ion channels. We recently described such a device, which consisted of a single conically shaped gold nanotube embedded within a polymeric membrane. This device mimicked one of the key functions of voltage-gated ion channels: the ability to strongly rectify the ionic current flowing through it. The data obtained were interpreted using a simple electrostatic model. While the details are still being debated, it is clear that ion-current-rectification in biological ion channels is more complicated and involves physical movement of an ionically charged portion of the channel in response to a change in the transmembrane potential. We report here artificial ion channels that rectify the ion current flowing through them via this "electromechanical" mechanism. These artificial channels are also based on conical gold nanotubes, but with the critical electromechanical response provided by single-stranded DNA molecules attached to the nanotube walls.     

Structural dependence of electron transfer to non-covalent polar complexes

Electron attachment to polar molecules and their non-covalent complexes can lead to different kinds of anions which differ from their excess electron localization. Spectroscopic methods for studying anion structures are reviewed. In many cases, the neutral and anion structures are identical and can be deduced from the electron attachment properties. Examples are given for complexes containing polar solvents or building blocks of biomolecules (nucleobases, amino acid residues...).     

Intramolecular Carbenoid Reactions of Pyrrole Derivatives Efficient Syntheses of Pyrrolizinone and Dihydroindolizinone

The copper-catalyzed pyrolysis of 1-diazo-3-(pyrrol-1-yl)-2-propanone (1a) and 1-diazo-4-(pyrrol-1-yl)-2-butanone (1b) in benzene solution gave 1 H-pyrrolizin-2-(3H)-one (4a) and 5,6-dihydroindolizin-7 (8H)-one (4b) , respectively, in quantitative yield. Similar pyrolysis of 1-diazo-4-(3-methylindol-1-yl)-2-butanone (9) was less efficient giving 1-methylbenzo[b]-5,6-dihydroindroindolizin-7 (8H)-one (10) and 4-(3-methylindol-1-yl)-but-l-en-3-one (11) in 7% and 24% yield, respectively.     

Capillary electrophoresis in aqueous-organic media. Ionic strength effects and limitations of the Hubbard-Onsager dielectric friction model

The mobilities of three aromatic sulfonates, ranging in charge from -1 to -3, were investigated by capillary electrophoresis using buffers containing 0 to 75% ethanol or 2-propanol. Absolute mobilities were determined by extrapolation of the effective mobilities to zero ionic strength according to the Pitts' equation. For all buffers studied, ions of higher charge experienced larger ionic strength effects. The resulting ionic strength-induced selectivity alterations were more dramatic when organic solvents were present in the media. Furthermore, for different organic modifier types and contents, the magnitude of the ionic strength effect was governed to a large extent by the 1/(eta epsilon 1/2) dependence in the electrophoretic effect of the Pitts' equation. Addition of ethanol or 2-propanol to the electrophoretic media resulted in changes in the absolute mobilities of the ions. These solvent-induced mobility changes are attributed to dielectric friction. As predicted by the Hubbard-Onsager model, dielectric friction increased with increasing organic content and with increasing analyte charge. As a result, dramatic changes in the relative absolute mobilities were observed, such as a reversal in migration order between sulfonates of -1 and -3 charge in 75% 2-propanol. Within the alcohols, the Hubbard-Onsager model was successful at predicting the relative mobility trends upon changing solvent. However, the relative trends observed between acetonitrile-water and alcohol-water media were not consistent with the model. This may be explained by the continuum nature of the model, whereby the different ion-solvent interactions characteristic to each solvent class are not taken into account.     

X-ray mapping in electron-beam instruments.

This review traces the development of X-ray mapping from its beginning 50 years ago through current analysis procedures that can reveal otherwise obscure elemental distributions and associations. X-ray mapping or compositional imaging of elemental distributions is one of the major capabilities of electron beam microanalysis because it frees the operator from the necessity of making decisions about which image features contain elements of interest. Elements in unexpected locations, or in unexpected association with other elements, may be found easily without operator bias as to where to locate the electron probe for data collection. X-ray mapping in the SEM or EPMA may be applied to bulk specimens at a spatial resolution of about 1 microm. X-ray mapping of thin specimens in the TEM or STEM may be accomplished at a spatial resolution ranging from 2 to 100 nm, depending on specimen thickness and the microscope. Although mapping has traditionally been considered a qualitative technique, recent developments demonstrate the quantitative capabilities of X-ray mapping techniques. Moreover, the long-desired ability to collect and store an entire spectrum at every pixel is now a reality, and methods for mining these data are rapidly being developed.     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.