Refraction of water waves by periodic cylinder arrays

We show that in the long wavelength limit, water waves propagate through an array of bottom-mounted vertical cylinders as if the water has an effective depth and effective gravitational constant that depends on the filling ratio of the cylinders, leading to refraction phenomena that can be described by analytic formulas. The results are obtained with rigorous homogenization techniques, as well as the multiple scattering formalism that gives full dispersion relationships. This phenomenon provides a mechanism to control the flow of ocean wave energy, as exemplified by a water-wave focusing lens.     

Measurement of the total active 8B solar neutrino flux at the Sudbury Neutrino Observatory with enhanced neutral current sensitivity

The Sudbury Neutrino Observatory has precisely determined the total active (nu(x)) 8B solar neutrino flux without assumptions about the energy dependence of the nu(e) survival probability. The measurements were made with dissolved NaCl in heavy water to enhance the sensitivity and signature for neutral-current interactions. The flux is found to be 5.21 +/- 0.27(stat)+/-0.38(syst) x 10(6) cm(-2) s(-1), in agreement with previous measurements and standard solar models. A global analysis of these and other solar and reactor neutrino results yields Deltam(2)=7.1(+1.2)(-0.6) x 10(-5) eV(2) and theta=32.5(+2.4)(-2.3) degrees. Maximal mixing is rejected at the equivalent of 5.4 standard deviations.     

Dynamic kinetic resolution of atropisomeric amides

[reaction: see text] Using L-proline as catalyst in the asymmetric aldol reaction and a series of benzamides and naphthamides, we have accomplished a dynamic kinetic resolution that simultaneously establishes the stereochemistry of the atropisomeric amide's chiral axis and a stereogenic center. The enantioselectivities ranged from 82% to 95% and the diastereoselectivities from 2.1:1 to 7.0:1.     

Dialkylaminoacetonitrile derivatives as amide synthons. A one-pot preparation of heteroaryl amides via a strategy of sequential SNAr substitution and oxidation

Dialkylamino acetonitrile derivatives were utilized as alternative to cyanohydrin synthons for preparation of the corresponding heteroaryl dialkyl amides via a strategy of sequential base-mediated coupling and oxidation. The most advantageous oxidant, NiO(2)-H(2)O, can readily oxidize 2-substituted aminoacetonitriles to the corresponding amides under both basic and neutral conditions by forming cyanohydrins in situ.     

Synthesis and electronic properties of donor-acceptor pi-conjugated siloles

An efficient method is presented for the synthesis of novel donor-acceptor silole chromophores through selective monohalogenation of 2,5-dimetallosiloles followed by Negishi alkyne cross-coupling reactions. The electronic properties and crystal packing of these new siloles can be controlled through judicious combinations of peripheral functional groups.     

Composition control and electrical properties of PMN-PT thin films around the morphotropic boundary

We have successfully grown (1-x)Pb(Mg_1/3- Nb_1/3)O₃-xPbTiO₃ (PMN-PT) thin films with x=0.3, 0.35 and 0.4 by pulsed laser deposition. X-ray-diffraction studies reveal that the PMN-PT films grown on La_0.5Sr_0.5CoO₃/LaAlO₃ substrates form epitaxial heterostructures. Composition control and remedial measures to compensate for the lead and magnesium losses due to re-evaporation are demonstrated. As a common feature, the as-grown PMN-PT thin films exhibit a self-poling behavior. Their dielectric constants measured at room temperature vary from 1500 to 2500, depending on the PMN to PT ratios. The pyroelectric coefficient of the films varies from 160 to 300 C/m²K. The piezoelectric coefficient d₃₃ is around 27 pm/V in the as-grown 70/30 films. A comparison of these values with the bulk PMN-PT of same compositions implies that the much-reduced piezoelectric properties in the PMN-PT films are primarily due to a substrate-clamping effect. PACS 77.84.-s; 77.65.-j; 77.80.-e     

Leakage current and pyroelectric properties of compositionally graded (Pb,Ca)TiO<Subscript>3</Subscript> films

Highly (100)-oriented, compositionally graded (Pb,Ca)TiO₃ (PCT) thin films with a Ca content from 0 to 24 mol% on Pt/Ti/SiO₂/Si substrates were prepared by a sol-gel process. The graded structure of the Au/PCT/Pt film capacitor showed a well-saturated hysteresis loop at an applied field of 500 kV/cm with remanent polarization (P_r), and coercive electric field (E_c) values of 9.35 C/cm² and 130 kV/cm, respectively. At 100 kHz, the dielectric constant and dielectric loss of the film were 129 and 0.024, respectively. The leakage current density of the graded PCT film was less than 1.0×10^-7 A/cm² over a voltage range from 0 to 4 V. The conduction current depended on the voltage polarity. At low electric field (110 and 180 kV/cm, respectively, for Pt and Au electrodes biased negatively), the Au/PCT and PCT/Pt interfaces form a Schottky barrier. At high electric field (>110 kV/cm), the Au electrode biased negatively shows space-charge-limited current (SCLC) behavior. The temperature dependencies of the pyroelectric coefficients of the graded PCT film were measured by a dynamic technique. From 20 to 82 °C, the pyroelectric coefficients of graded PCT film remain steady in the range 106 to 118 C/m²K. The detectivity figure of merit (F_D) of the graded PCT film was 6.7×10^-6 Pa^-0.5. PACS 77.80.-s; 77.70.+a; 77.22.-d; 51.50.+v; 68.37.-d     

Self-assembly of CuS nanoparticles to solid,hollow, spherical and tubular structures in a simple aqueous-phase reaction

We report fabrication of CuS particles with solid, hollow, spherical and tubular structures in a simple aqueous system under microwave irradiation, employing CuSO₄ and Na₂S₂O₃ as the starting materials without assistance of any surfactant or template. Energy-dispersive X-ray analysis and an X-ray powder diffraction pattern proved that the product is hexagonal CuS phase. The morphologies of the product were observed by scanning electron microscopy and transmission electron microscopy. Some factors affecting the morphologies of the product are discussed. PACS 81.05.Hd; 81.07.Bc; 81.16.Be; 81.16.Dn; 81.20.Ka