Radiation patterns of electric dipole antenna in the presence of a biisotropic sphere

Analytic expressions of the dyadic Green's function of an arbitrary electric current source embedded in a general biisotropic sphere are presented at first, and the radiation characteristics of an electric dipole antenna placed on the surface of a biisotropic sphere lens are examined. The effects of the electric-and the magnetic-coefficients ( _e and _m ) of biisotropic medium on the radiation patterns of electric dipole antenna are investigated in detail.     

Comparison of gas chromatographic and high-performance liquid chromatographic assays for the determination of debrisoquine and its 4-hydroxy metabolite in human fluids

A comparison of an established gas chromatographic assay for 4-hydroxydebrisoquine and debrisoquine and a modified high-performance liquid chromatographic assay was made. Both assays used guanoxan as the internal standard and required derivatization of all three compounds with acetylacetone at 96 degrees C for 2.5 h and subsequent ethereal extraction and cleaning steps before chromatographic analysis. For detailed pharmacokinetic studies the gas chromatographic assay was more sensitive in the measurement of low concentrations in plasma, but the liquid chromatographic assay was adequate for phenotyping the 4-hydroxylation of debrisoquine in a population. In the latter assay a mobile phase consisting of 70% methanol in water at pH 3.5 (adjusted with orthophosphoric acid containing 10 mM 1-pentanesulphonic acid was employed (flow-rate 1.5 ml/min) with a pre-column (C8) linked to a reversed-phase muBondapak C18 cartridge in a Z-module. The eluate was detected at 248 nm. With this assay it was observed that the buccal absorption of debrisoquine and 4-hydroxy-debrisoquine was affected by the pH of the buccal medium. This indicates that urinary pH may influence the excretion of both substances at high pH. The debrisoquine-to-4-hydroxydebrisoquine ratio may be dose-dependent.     

Determination of hexamethylene-based isocyanates in spray-painting operations. Part 1. Evaluation of a polyurethane foam sponge sampler

A polyurethane foam (PUF) sponge was mounted in a cassette sampler and evaluated as a sorbent for the collection of hexamethylene diisocyanate (HDI) monomer and HDI-based oligomers. Recovery studies indicated 112 +/- 34% average recovery of HDI monomer and 92 +/- 9% and 97 +/- 25% average recovery of HDI-based oligomers when using impregnated PUF sponges. The PUF sponge was also evaluated during actual spray-painting operations. In a series of side-by-side sampling events, an impinger filled with 1-(2-methoxyphenyl)piperazine (MOP) in toluene was compared directly with a cassette sampler containing a PUF sponge impregnated with MOP or 1-(9-anthracenylmethyl)piperazine (MAP) in dimethyl sulfoxide (DMSO). For the analysis of HDI-based oligomer, there is no significant difference (p < 0.05, n = 7) in the air concentration when sampling with either the PUF sponge cassette or the impinger. The results are significant because they indicate that a PUF sponge, which is more convenient than an impinger, may be used for the collection of HDI-based oligomer generated during spray-painting operations.     

Macrocyclic polycther sulfide syntheses. The preparation of thia-crown-5, 6 and 7 compounds

Macroeyclic polyether sulfides have been prepared by reacting an oligoethylene glycol dichloride with a dimercaptan or sodium sulfide as reported in a previous paper (6). The following new compounds were prepared: 1,4,7-trithia(15-crown-5) (1); 1,4,10-trithia(15-crown-5) (II): 1,4,7,10-tetrathia(15-crown-5) (III); I-thia(18-crown-6) (IV); 1,4-dithia(18-crown-6) (V); 1,7-dithia(18-crown-6) (VI); 1,4,7-trithia(18-crown-6) (VII); 1,7-dithia(21-crown-7) (VIII); and 1,4,7-trithia(21-crown-7) (IX). The melting points of these and previously reported thia-crown compounds correlate with their structures. X-ray analyses of two thia-crown compounds indicate that the large sulfur atoms are directed away from the center of the ring.     

A practical synthetic route to 4′-alkylaristeromycin derivatives: 4′-methylaristeromycin

(−)-(1S,4R)-4-Hydroxy-2-cyclopenten-1-yl acetate provided a convenient entry point for a 16-step chiral preparation of 4′-methylaristeromycin. This procedure is adaptable to a number of carbocyclic nucleosides with a diversity of substitution at C-4′ and C-5′ and a variety of heterocyclic bases.     

Octahedral cobalt(III) complexes of the chloropentammine type. XXVII. Effects of Methyl Substituents on reactivities of the cis-chloro-n-propylaminebis(ethylenediamine)-cobalt(III) cation

Salts of one isomeric form of the chloro-n-butylamine-, chloro-iso-butyl-amine- and chloro-sec-butylamine-bis(ethylenediamine)cobalt(III) cations have been prepared and characterised to have a cis-configuration (IR and VIS spectroscopy). Rate constants for their spontaneous aquation, mercury(II)-induced aquation and base hydrolysis have been determined and the activation parameters calculated. The results are compared with data obtained for the n-propylamine complex with a view to investigate the effects of methyl (α, β, γ) substituents on reactivities. The rate-determining dissociation of the outgoing group (Cl^? or HgCl⁺) takes place via either a square-pyramidal or a trigonal-bipyramidal intermediate, depending on whether the activation entropy is negative or positive.     

Solution properties of polyoxymethylene

Light scattering and viscosity have been measured at 25°C. for dilute solutions of six unfractionated polyoxymethylene samples in the mixed solvent hexafluoroacetone–water (mole ratio 1/1.7) slightly buffered with triethylamine. Dialysis equilibrium through porous Vycor glass thimbles indicates that the polymer is strongly solvated by the hydrate (CF₃)₂C(OH)₂, and this must be taken into account in evaluating weight-average molecular weights from the light-scattering data. Over the molecular weight range 23,000–185,000, the intrinsic viscosities (in deciliter per gram) follow the relation The corresponding unperturbed dimensions are σ = 2.3 ± 0.2 or r₀²/nl² = 10.5 ± 1.5.     

Palladium-catalyzed C-O bond formation: direct synthesis of phenols and aryl/alkyl ethers from activated aryl halides

A simple and efficient palladium-catalyzed carbon-oxygen bond formation is reported. The palladium-tri-tert-butylphosphine complex was found to be effective in converting haloarenes to corresponding substituted phenols. This methodology offers a direct transformation of aryl halides to phenols, as well as the straightforward application to generate a wide variety of diaryl or alkyl/aryl ethers.