Hydroformylation and hydroalkylcarbonylation of 3,4-dihydro[2H]pyran catalysed by Co2(CO)8 under syngas conditions

In the cobalt-catalysed hydroformylation of 3,4-dihydro[2H]pyran, the influence of different reaction parameters such as time, pressure, triphenylphosphine addition, catalyst and substrate concentration has been investigated. 2-formyl-tetrahydropyran, tetrahydropyran and a hydroalkylcarbonylation product were the main reaction products. The selectivity towards 2-formyl-tetrahydropyran formation is favoured at constant catalyst and substrate concentration. The coordination of the pyran’s oxygen to the cobalt atom seems to be an important intermediate for the formation of 2-formyl-tetrahydropyran. Different substrate or catalyst concentrations promote the formation of other reduced products. The addition of triphenylphosphine to the catalyst leads to a less active species, which decreases the yield and promotes the hydroalkylcarbonylation reaction.     

Slow-light fourier transform interferometer

We describe a new type of Fourier transform (FT) interferometer in which the tunable optical delay between the two arms is realized by using a continuously variable slow-light medium instead of a moving arm as in a conventional setup. The spectral resolution of such a FT interferometer exceeds that of a conventional setup of comparable size by a factor equal to the maximum group index of the slow-light medium. The scheme is experimentally demonstrated by using a rubidium atomic vapor cell as the tunable slow-light medium, and the spectral resolution is enhanced by a factor of approximately 100.     

Supermolecular Columnar Liquid‐Crystalline Phosphorus Dendrimers Decorated with Sulfonamide Derivatives

A series of supermolecular liquid crystals has been synthesized by combining phosphorus dendrimers of the zero, first, and fourth generations with sulfonamide derivatives, thus generating dendromesogens bearing 6, 12, and 96 mesogenic units on their surfaces. The relevant reactions could be monitored by ¹H, ¹⁹F, and ³¹P{¹H} NMR spectroscopies. The thermal and mesomorphic properties of the products have been studied by optical microscopy, differential scanning calorimetry, and X‐ray diffraction. All of the new macromolecules prepared in this work have been found to show mesomorphic properties over a wide temperature range; moreover, for all of the compounds, the columnar mesophases observed were maintained or vitrified at room temperature. On increasing the generation of these dendromesogens, mesophases appear at lower temperatures and remain stable over a wider temperature interval. In all cases, on the basis of X‐ray analysis, a cylindrical symmetry of the molecules can be proposed to promote the supramolecular columnar arrangement observed in the mesophases. In this type of model, the height of the dendrimer clearly increases with increasing dendrimer generation, whereas its cross‐ sectional area increases only slightly, probably due to compression of the highly hyperbranched structures as a consequence of their progressive steric constraints. The mesomorphic arrangement is governed by the peripheral sulfonamide units.     

Hierarchical Structure of NiMo Hydrodesulfurization Catalysts Determined by Ptychographic X‐Ray Computed Tomography

Hydrodesulphurization, the removal of sulphur from crude oils, is an essential catalytic process in the petroleum industry safeguarding the production of clean hydrocarbons. Sulphur removal is critical for the functionality of downstream processes and vital to the elimination of environmental pollutants. The effectiveness of such an endeavour is among other factors determined by the structural arrangement of the heterogeneous catalyst. Namely, the accessibility of the catalytically active molybdenum disulphide (MoS₂) slabs located on the surfaces of a porous alumina carrier. Here, we examined a series of pristine sulfided Mo and NiMo hydrodesulphurization catalysts of increasing metal loading prepared on commercial alumina carriers using ptychographic X‐ray computed nanotomography. Structural analysis revealed a build consisting of two interwoven support matrix elements differing in nanoporosity. With increasing metal loading, approaching that of industrial catalysts, these matrix elements exhibit a progressively dissimilar MoS₂ surface coverage as well as MoS₂ cluster formation at the matrix element boundaries. This is suggestive of metal deposition limitations and/ or catalyst activation and following prohibitive of optimal catalytic utilization. These results will allow for diffusivity calculations, a better rationale of current generation catalyst performance as well as a better distribution of the active phase in next‐generation hydrodesulphurization catalysts.     

Production and Digestibility Studies of β-Galactosyl Xylitol Derivatives Using Heterogeneous Catalysts of LacA β-Galactosidase from Lactobacillus Plantarum WCFS1

The synthesis of β-galactosyl xylitol derivatives using immobilized LacA β-galactosidase from Lactobacillus plantarum WCFS1 is presented. These compounds have the potential to replace traditional sugars by their properties as sweetener and taking the advantages of a low digestibility. The enzyme was immobilized on different supports, obtaining immobilized preparations with different activity and stability. The immobilization on agarose-IDA-Zn-CHO in the presence of galactose allowed for the conserving of 78% of the offered activity. This preparation was 3.8 times more stable than soluble. Since the enzyme has polyhistidine tags, this support allowed the immobilization, purification and stabilization in one step. The immobilized preparation was used in synthesis obtaining two main products and a total of around 68 g/L of β-galactosyl xylitol derivatives and improving the synthesis/hydrolysis ratio by around 30% compared to that of the soluble enzyme. The catalyst was recycled 10 times, preserving an activity higher than 50%. The in vitro intestinal digestibility of the main β-galactosyl xylitol derivatives was lower than that of lactose, being around 6 and 15% for the galacto-xylitol derivatives compared to 55% of lactose after 120 min of digestion. The optimal amount immobilized constitutes a very useful tool to synthetize β-galactosyl xylitol derivatives since it can be used as a catalyst with high yield and being recycled for at least 10 more cycles.     

Least-squares support vector machines and near infrared spectroscopy for quantification of common adulterants in powdered milk

This paper proposes the use of the least-squares support vector machine (LS-SVM) as an alternative multivariate calibration method for the simultaneous quantification of some common adulterants (starch, whey or sucrose) found in powdered milk samples, using near-infrared spectroscopy with direct measurements by diffuse reflectance. Due to the spectral differences of the three adulterants a nonlinear behavior is present when all groups of adulterants are in the same data set, making the use of linear methods such as partial least squares regression (PLSR) difficult. Excellent models were built using LS-SVM, with low prediction errors and superior performance in relation to PLSR. These results show it possible to built robust models to quantify some common adulterants in powdered milk using near-infrared spectroscopy and LS-SVM as a nonlinear multivariate calibration procedure.     

The ionized methylene transfer from the distonic radical cation +CH2-O-CH2 to heterocyclic compounds. A pentaquadrupole mass spectrometric study

Ion-molecule reactions of the mass-selected distonic radical cation ⁺CH₂-O-CH ₂ ^· (1) with several heterocyclic compounds have been investigated by multiple stage mass spectro- metric experiments performed in a pentaquadrupole mass spectrometer. Reactions with pyridine, 2-, 3-, and 4-ethyl, 2-methoxy, and 2-n-propyl pyridine occur mainly by transfer of CH ₂ ^+· to the nitrogen, which yields distonic N-methylene-pyridinium radical cations. The MS³ spectra of these products display very characteristic collision-induced dissociation chemistry, which is greatly affected by the position of the substituent in the pyridine ring. Ortho isomers undergo a δ-cleavage cyclization process induced by the free-radical character of the N-methylene group that yields bicyclic pyridinium cations. On the other hand, extensive CH ₂ ^+· transfer followed by rapid hydrogen atom loss, that is, a net CH⁺ transfer, occurs not to the heteroatoms, but to the aromatic ring of furan, thiophene, pyrrole, and N-methyl pyrrole. The reaction proceeds through five- to six-membered ring expansion, which yields the pyrilium, thiapyrilium, N-protonated, and N-methylated pyridine cations, respectively, as indicated by MS³ scans. Ion 1 fails to transfer CH ₂ ^+· to tetrahydrofuran, whereas a new α-distonic sulfur ion is formed in reactions with tetrahydrothiophene. Unstable N-methylene distonic ions, likely formed by transfer of CH ₂ ^+· to the nitrogen of piperidine and pyrrolidine, undergo rapid fragmentation by loss of the α-NH hydrogen to yield closed-shell immonium cations. The most thermodynamically favorable products are formed in these reactions, as estimated by ab initio calculations at the MP2/6-31G(d,p)//6-31G(d,p) + ZPE level of theory.     

The effect of the nitrogen non-bonding electron pair on the NMR and X-ray in 1,3-diazaheterocycles

The effect of the nitrogen nonbonding electron pair on the ¹J_C,H values of 1,3-diazaheterocycles was analyzed and compared to 1,5-diazabiciclo[3.2.1]octanes, which have a restricted conformation. The ¹J_C,H values were measured by observing the ¹³C satellites in the ¹H NMR spectra and then determining the ¹H-coupled ¹³C NMR spectra. The ¹J_C,H values are 10 Hz larger when the α-hydrogen is synperiplanar rather than antiperiplanar to the nonbonding electron pair on the nitrogen, which serves as experimental evidence of the orbital n_N→σ¹_C,Hap interactions. In addition, the homoanomeric effect from the interactions of the nitrogen lone pair with the antibonding orbital of the equatorial hydrogen, which was in the β position, was discussed (n_N→σ¹_C(β),Heq).