Energetic ion bombardment of Ag surfaces by C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> and Ga<Superscript>+</Superscript> projectiles

The ion bombardment-induced release of particles from a metal surface is investigated using energetic fullerene cluster ions as projectiles. The total sputter yield as well as partial yields of neutral and charged monomers and clusters leaving the surface are measured and compared with corresponding data obtained with atomic projectile ions of similar impact kinetic energy. It is found that all yields are enhanced by about one order of magnitude under bombardment with the C60+ cluster projectiles compared with Ga+ ions. In contrast, the electronic excitation processes determining the secondary ion formation probability are unaffected. The kinetic energy spectra of sputtered particles exhibit characteristic differences which reflect the largely different nature of the sputtering process for both types of projectiles. In particular, it is found that under C60+ impact (1) the energy spectrum of sputtered atoms peaks at significantly lower kinetic energies than for Ga+ bombardment and (2) the velocity spectra of monomers and dimers are virtually identical, a finding which is in pronounced contrast to all published data obtained for atomic projectiles. The experimental findings are in reasonable agreement with recent molecular dynamics simulations.     

A structure-based design approach to advance the allyltyrosine-based series of HIV integrase inhibitors

As of mid-2017, only one structure of the human immunodeficiency virus (HIV) integrase core domain co-crystallised with an active site inhibitor was reported. In this structure (1QS4), integrase is complexed with a diketo-acid based strand-transfer inhibitor (INSTI). This structure has been a preferred platform for the structure-based design of INSTIs despite concerns relating to structural irregularities arising from crystallographic packing effects. A survey of the current pool of 297 reported integrase catalytic core structures indicated that the anatomy of the active site in the complex structure 1QS4 exhibits subtle variations relative to all other structures examined. Consequently, the 1QS4 structure was employed for docking studies. From the docking of twenty-seven allyltyrosine analogues, a 3-point inhibitor binding motif required for activity was established and successfully utilised in the development of a tripeptide displaying an EC₅₀ value of 10 ± 5 μM in HIV infected human T-cells. Additional docking of “in-house” compound libraries unearthed a methyl ester based nitrile derivative displaying an IC₅₀ value of 0.5 μM in a combined 3′-processing and strand-transfer assay.     

Reaction of CO2 with a Vanadium(II) Aryl Oxide: Synergistic Activation of CO2/Oxo Groups towards H‐Atom Radical Abstraction

Treatment of divalent (ONNO)V(TMEDA) ( 1 ; ONNO=[2,4‐Me₂‐2‐(OH)C₆H₂CH₂]₂N(CH₂)₂NMe₂) with CO₂ afforded [(ONNO)V]₂(μ‐OH)(μ‐formate) ( 2 ). Whereas the bridging hydroxo and formate groups both originated from CO₂, the H atoms present on the two residues were obtained through H‐atom radical abstraction from the solvent. DFT calculations revealed an initially linear CO₂ bonding mode, followed by deoxygenation, and highlighted a synergistic effect between the so‐formed oxo group and an additional bridging CO₂ residue in promoting radical behavior.     

A Tailor‐Made Synthetic Polymer for Cell Encapsulation: Design Rationale,Synthesis, Chemical–Physics and Biological Characterizations

This study presents a custom‐made in situ gelling polymeric precursor for cell encapsulation. Composed of poly((2‐hydroxyethyl)methacrylate‐co‐(3‐aminopropyl)methacrylamide) (P(HEMA‐co‐APM) mother backbone and RGD‐mimicking poly(amidoamine) (PAA) moiteis, the comb‐like structured polymeric precursor is tailored to gather the advantages of the two families of synthetic polymers, i.e., the good mechanical integrity of PHEMA‐based polymers and the biocompatibility and biodegradability of PAAs. The role of P(HEMA‐co‐APM) in the regulation of the chemico‐physical properties of P(HEMA‐co‐APM)/PAA hydrogels is thoroughly investigated. On the basis of obtained results, namely the capability of maintaining vital NIH3T3 cell line in vitro for 2 d in a 3D cell culture, the in vivo biocompatibility in murine model for 16 d, and the ability of finely tuning mechanical properties and degradation kinetics, it can be assessed that P(HEMA‐co‐APM)/PAAs offer a cost‐effective valid alternative to the so far studied natural polymer‐based systems for cell encapsulation.

     

Effect of SIMS ionization probability on depth resolution for organic/inorganic interfaces

Secondary ion mass spectrometry (SIMS) relies on the fact that surface particles ejected from a solid surface are ionized under ion bombardment. By comparing the signal of molecular secondary ions desorbed from an organic film with that of the corresponding sputtered neutral precursor molecules, we investigate the variation of the molecular ionization probability when depth profiling through the film to the substrate interface. As a result, we find notable variations of the ionization probability both at the original surface and in the interface region, leading to a strong distortion of the measured SIMS depth profile. The experiments show that the effect can act in two ways, leading either to an apparent broadening or to an artificial sharpening of the observed film‐substrate transition. As a consequence, we conclude that care must be taken when assessing interface location, width, or depth resolution from a molecular SIMS depth profile.     

High-birefringence nematic liquid crystal for broadband THz applications

Liquid crystals (LCs) have been studied extensively in the visible range for their dielectric tunability, and the characterisation in the terahertz (THz) range has gained increasing interest due to the need for active THz modulation and switching devices. In this paper, we use THz time-domain spectroscopy to measure the frequency-dependent birefringence and the absorption coefficient of a number of commercial and non-commercial nematic LCs, including E7, BL037, MDA-98-1602, LCMS-107, GT3-23001 and 1825, over a range of bias voltages at room temperature. Furthermore, several basic components of LC mixture are analysed to establish their contributions to birefringence and theoretical model is used to fit the absorption spectra. The large tunability and low loss measured for a range of samples show that the LCs are useful tunable dielectrics for compact, efficient and broadband THz devices.     

Nickel‐Catalyzed Cross‐Electrophile Coupling with Organic Reductants in Non‐Amide Solvents

Cross‐electrophile coupling of aryl halides with alkyl halides has thus far been primarily conducted with stoichiometric metallic reductants in amide solvents. This report demonstrates that the use of tetrakis(dimethylamino)ethylene (TDAE) as an organic reductant enables the use of non‐amide solvents, such as acetonitrile or propylene oxide, for the coupling of benzyl chlorides and alkyl iodides with aryl halides. Furthermore, these conditions work for several electron‐poor heterocycles that are easily reduced by manganese. Finally, we demonstrate that TDAE addition can be used as a control element to ‘hold’ a reaction without diminishing yield or catalyst activity.