A polystyrene-supported triflating reagent for the synthesis of aryl triflates

An insoluble polystyrene-supported triflating reagent has been prepared by suspension co-polymerization of N-(4-vinylphenyl)trifluoromethanesulphonimide, styrene and the JandaJel^® cross-linker. This reagent, in the presence of triethylamine, allows for the efficient synthesis of aryl triflates from a wide range of phenols in a process that permits the desired product to be isolated from the reaction mixture in essentially pure form via several filtration and concentration operations. Adding to the utility of this reagent is its ability to be easily recovered, regenerated and reused. Both soluble and insoluble bifunctional polymers containing trialkylamine moieties in addition to triflimide groups were also prepared and examined as triflating reagents. Unfortunately these reagents afforded only modest yields of the desired products in representative reactions.     

A short synthesis of C-glycosyl pyrazoles and pyrroles

The sodium salt of TOSMIC reacted with (E)-3,4,5,6,7-penta-O-acetyl-1,2-dideoxy-1-C-nitro-D-galacto- (1) and -D-manno-hept-1-enitol (2) to give 3-(D-galacto- (3) and 3-(D-manno-penta-O-acetylpentitol-1-yl)-4-nitropyrrole (4) , respectively. Compound 1 reacted with diaryl nitrile imines, affording 1,3-diaryl-4-(1,2,3,4,5-penta-O-acetyl-D-galacto-pentitol-1-yl)pyrazoles 5 and 6 .     

High-speed gradient parallel liquid chromatography/tandem mass spectrometry with fully automated sample preparation for bioanalysis: 30 seconds per sample from plasma

In this work, a high-throughput and high-performance bioanalytical system is described that is capable of extracting and analyzing 1152 plasma samples within 10 hours. A Zymark track robot system interfaced with a Tecan Genesis liquid handler was used for simultaneous solid-phase extraction of four 96-well plates in a fully automated fashion. The extracted plasma samples were injected onto four parallel monolithic columns for separation via a four-injector autosampler. The use of monolithic columns allowed for fast and well-resolved separations at a considerably higher flow rate without generating significant column backpressure. This resulted in a total chromatographic run cycle time of 2 min on each 4.6 x 100 mm column using gradient elution. The effluent from the four columns was directed to a triple quadrupole mass spectrometer equipped with an indexed four-probe electrospray ionization source (Micromass MUX interface). Hence, sample extraction, separation, and detection were all performed in a four-channel parallel format that resulted in an overall throughput of about 30 s per sample from plasma. The performance of this system was evaluated by extracting and by analyzing twelve 96-well plates (1152) of human plasma samples spiked with oxazepam at different concentrations. The relative standard deviation (RSD) of analyte sensitivity (slope of calibration curve) across the four channels and across the 12 plates was 5.2 and 6.8%, respectively. An average extraction recovery of 77.6% with a RSD of 7.7% and an average matrix effect of 0.95 with a RSD of 5.2% were achieved using these generic extraction and separation conditions. The good separation efficiency provided by this system allowed for rapid method development of an assay quantifying the drug candidate and its close structural analog metabolite. The method was cross-validated with a conventional liquid chromatography/tandem mass spectrometry (LC/MS/MS) assay.     

From clusters to ionic complexes: structurally characterized thallium titanium double alkoxides

A series of sterically varied titanium alkoxides [[Ti(OR)(4)](n)(), n = 4, OR = OCH(2)CH(3) (OEt); n = 1, OCH(CH(3))(2) (OPr(i)); n = 2, OCH(2)C(CH(3))(3) (ONep); n = 1, OC(6)H(3)(CH(3))(2)-2,6 (DMP)] were reacted with a series of thallium alkoxides [[Tl(OR)](x) (x = 4, OR = OEt, ONep; n = infinity, DMP)]. The resultant products of the [Tl(mu(3)-OEt)](4)-modified [Ti(OR)(4)](n)() (OR = OEt, OPr(i), ONep) were found by X-ray analysis to be Tl(4)Ti(2)(mu-O)(mu(3)-OEt)(8)(OEt)(2) (1), Tl(4)Ti(2)(mu-O)(mu(3)-OPr(i))(5)(mu(3)-OEt)(3)(OEt)(2) (2), and TlTi(2)(mu(3)-OEt)(2)(mu-OEt)(mu-ONep)(2)(ONep)(4) (3), respectively. The reaction of [Tl(mu(3)-OEt)](4), 12HOEt, and 4[Ti(mu-ONep)ONep)(3)](2) to generate 3 in a higher yield resulted in the isolation of TlTi(2)(mu(3)-OEt)(mu(3)-ONep)(mu-OEt)(mu-ONep)(2)(ONep)(4) (4). Compounds 1 and 2 possess an octahedral (Oh) arrangement of two Ti and four Tl metal atoms around a mu-O central oxide atom (the Tl-O distance is too long to be considered a bond). For both compounds, each Ti atom adopts a distorted Oh geometry with one terminal OEt ligand. The Tl atoms are formally 4-coordinated, adopting a distorted pyramidal geometry using four mu(3)-OR (OR = OEt or OPr(i)) ligands to complete their coordination sphere. The Tl atoms reside approximately 1.4 A below the basal plane of oxygens. In contrast to these structures, both 3 and 4 utilize ONep ligands and display reduced oligomerization yielding trinuclear complexes without oxo formation. The two Ti cations are Oh, and the single Tl cation is in a formal distorted pyramidal (PYD) arrangement. If the lone pair of the Tl cations are considered in the geometry, each Tl adopts a square base pyramidal geometry. Two terminal ONep ligands are bound to each Ti with the remainder of the molecule consisting of mu(3)- and mu-ONep ligands. The reaction of [Tl(mu(3)-ONep)](4) with two equivalents of [Ti(mu-ONep)(ONep)(3)](2) also led to the isolation of the homoleptic trinuclear complex TlTi(2)(mu(3)-ONep)(2)(mu-ONep)(3)(ONep)(4) (5) which is analogous in structure to the mixed ligand species of 3 and 4. Each Ti is Oh coordinated with six ONep ligands, and the single Tl is PYD bound by ONep ligands. A further increase in the steric bulk of the pendant ligands, using [Tl(mu-DMP)](infinity) and [Ti(mu-ONep)(ONep)(3)](2), resulted in a further decrease in the nuclearity yielding the dinuclear species TlTi(mu-DMP)(mu-ONep)(DMP)(ONep)(2) (6). For 6, the two metals are bound by a mu-ONep and a mu-DMP ligand. The Tl metal center was solved in a bent geometry while the Ti adopted a distorted trigonal bipyramidal (TBP) geometry using three ONep and two DMP ligands to fill its coordination sphere. Further increasing the steric bulk of the ancillary ligands using Ti(DMP)(4) and [Tl(mu-DMP)](infinity) led to the formation of [Tl(+)][(-)(eta(2-3)-DMP)Ti(DMP)(4)] (7). The Ti metal center is in a TBP geometry, and the "naked" Tl cation resides unencumbered by solvent molecules but was found to have a strong pi-interaction with four DMP ligands of neighboring Ti(DMP)(5)(-) anions. For this novel set of compounds, (205)Tl NMR spectroscopy was used to investigate the solution behavior of these compounds. Multiple (205)Tl resonances were observed for the solution spectra of the crystalline material of 1-6, and a broad singlet was observed for 7. The large number of minor resonances noted for these compounds was attributed to sensitivity of the Tl cation based on small variations due to ligand rearrangement. However, the major resonance noted in the (205)Tl NMR solution spectra of 1-7 are in agreement with their respective solid-state structures.     

Partial-filling affinity capillary electrophoresis

Partial-filling affinity capillary electrophoresis (PFACE) is used to examine the binding interactions between two model biological systems: D-Ala-D-Ala terminus peptides to the glycopeptide antibiotic vancomycin (Van) from Streptomyces orientalis, and arylsulfonamides to carbonic anhydrase B (CAB, EC 4.2.1.1, bovine erythrocytes). Using these two systems, modifications in the PFACE technique are demonstrated including flow-through PFACE (FTPFACE), competitive flow-through PFACE (CFTPFACE), on-column ligand synthesis PFACE (OCLSPFACE), and multiple-step ligand injection PFACE (MSLIPFACE). In PFACE small plugs of sample are injected into the capillary column and an equilibrium is established between receptor and ligand during electrophoresis. Binding constants are then obtained by Scatchard analysis using changes in the migration time of the receptor/ligand on changing the concentration of the ligand/receptor. Data demonstrating the quantitative potential of these methods are presented. This review focuses on the unique capabilities of the different PFACE techniques as applied to two model biological systems.     

1,3-Dichloro-2-butene: a useful precursor for the 2-butene-1,3-dianion and its corresponding 1,3-dipolar synthon

The reaction of 1,3-dicloro-2-butene (1; 5:1 Z:E-mixture) with lithium powder and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 1% molar) in the presence of different electrophiles [EtCHO, PrⁱCHO, Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, (c-C₃H₅)₂CO, Me₃SiCl] in THF at temperatures ranging between −78 and −50°C gives, after hydrolysis with water, the corresponding products 2 in different Z:E-ratios depending on the electrophile used. Treatment of some diols 2 with hydrochloric acid gives dienic alcohols 3 or substituted dihydropyrans 4, depending on the structure of the starting diol. Finally, the same dichlorinated starting material is transformed into the corresponding allylic amines derived from morpholine and benzyl methyl amine and submitted to the same DTBB-catalysed lithiation as above, so after reaction with different electrophiles [Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, Me₃SiCl] and final hydrolysis with water, compounds 7 are isolated having a Z-configuration. A mechanistic explanation for this behaviour is given.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

Structure of a de novo designed protein model of radical enzymes

The use of side chains as catalytic cofactors for protein mediated redox chemistry raises significant mechanistic issues as to how these amino acids are activated toward radical chemistry in a controlled manner. De novo protein design has been used to examine the structural basis for the creation and maintenance of a tryptophanyl radical in a three-helix bundle protein maquette. Here we report the detailed structural analysis of the protein by multidimensional NMR methods. An interesting feature of the structure is an apparent pi-cation interaction involving the sole tryptophan and a lysine side chain. Hybrid density functional calculations support the notion that this interaction raises the reduction potential of the W degrees /WH redox pair and helps explain the redox characteristics of the protein. This model protein system therefore provides a powerful model for exploring the structural basis for controlled radical chemistry in protein.     

Trinuclear pyrazine-bridged ruthenium complexes: syntheses, electrochemistry, NIR-Vis spectra, and their interpretation in terms of a 5-orbital-3-parameter model

A study of absorption spectra in the near-infrared (NIR) and visible (vis) regions of trinuclear Ru complexes containing pyrazine (pyz) as bridging ligand, trans-[(Ru(NH(3))(5)pyz)(2)Ru(NH(3))(4)](m+)(m = 6-9), is reported. The spectra were recorded on aqueous solutions containing the described species formed in situ by stoichiometric additions of a standard solution of Ce(SO(4))(2). They were interpreted in terms of a simple 5-orbital-3-parameter model which includes the effects of d-pi interaction and electronic correlation. The model is shown to account for the observed NIR-vis spectra of the complex ions. The 6+ parent species was synthesized by an improved literature method and fully characterized. The novel 8+ complex was also prepared and characterized. The 9+ ion was established to be slowly reduced by water, with dioxygen formation. Electrochemical (CV and DPV) studies were performed on the trinuclear 6+ complex, as well as on its constituent fragments [Ru(NH(3))(5)(pyz)](2+) and trans-[Ru(NH(3))(4)(pyz)(2)](2+).     

Acyclic Schiff base salts derived from 1,3‐diaminopropane and 1,3‐diamino‐2‐hydroxypropane

Two salts of acyclic Schiff base cationic ligands, namely N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride monohydrate, C₁₇H₂₂N₄O₄²⁺·2Cl⁻·H₂O, (I), and 2‐hydroxy‐N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride, C₁₇H₂₂N₄O₅²⁺·2Cl⁻, (II), were synthesized as precursors in order to obtain new acyclic and macrocyclic multidentate ligands and complexes. The cation conformations in compounds (I) and (II) are different in the solid state, although the cations are closely related chemically. Similarly, the hydrogen‐bonding networks involving ammonium cations, hydroxyl groups and chloride anions are also different. In the cation of compound (II), the hydroxyl group is disordered over two sets of sites, with occupancies of 0.785 (8) and 0.215 (8).