A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

Monitoring of malolactic fermentation in wine using an electrochemical bienzymatic biosensor for l-lactate with long term stability

l-lactic acid is monitored during malolactic fermentation process of wine and its evolution is strongly related with the quality of the final product. The analysis of l-lactic acid is carried out off-line in a laboratory. Therefore, there is a clear demand for analytical tools that enabled real-time monitoring of this process in field and biosensors have positioned as a feasible alternative in this regard. The development of an amperometric biosensor for l-lactate determination showing long-term stability is reported in this work. The biosensor architecture includes a thin-film gold electrochemical transducer selectively modified with an enzymatic membrane, based on a three-dimensional matrix of polypyrrole (PPy) entrapping lactate oxidase (LOX) and horseradish peroxidase (HRP) enzymes. The experimental conditions of the biosensor fabrication regarding the pyrrole polymerization and the enzymes entrapment are optimized. The biosensor response to l-lactate is linear in a concentration range of 1 × 10⁻⁶–1 × 10⁻⁴ M, with a detection limit of 5.2 × 10⁻⁷ M and a sensitivity of – (13500 ± 600) μA M⁻¹ cm⁻². The biosensor shows an excellent working stability, retaining more than 90% of its original sensitivity after 40 days. This is the determining factor that allowed for the application of this biosensor to monitor the malolactic fermentation of three red wines, showing a good agreement with the standard colorimetric method.     

Dynamic Covalent Identification of an Efficient Heparin Ligand

Despite heparin being the most widely used macromolecular drug, the design of small‐molecule ligands to modulate its effects has been hampered by the structural properties of this polyanionic polysaccharide. Now a dynamic covalent selection approach is used to identify a new ligand for heparin, assembled from extremely simple building blocks. The amplified molecule strongly binds to heparin (K_D in the low μm range, ITC) by a combination of electrostatic, hydrogen bonding, and CH–π interactions as shown by NMR and molecular modeling. Moreover, this ligand reverts the inhibitory effect of heparin within an enzymatic cascade reaction related to blood coagulation. This study demonstrates the power of dynamic covalent chemistry for the discovery of new modulators of biologically relevant glycosaminoglycans.     

Fast Exfoliation and Functionalisation of Two‐Dimensional Crystalline Carbon Nitride by Framework Charging

Two‐dimensional (2D) layered graphitic carbon nitride (gCN) nanosheets offer intriguing electronic and chemical properties. However, the exfoliation and functionalisation of gCN for specific applications remain challenging. We report a scalable one‐pot reductive method to produce solutions of single‐ and few‐layer 2D gCN nanosheets with excellent stability in a high mass yield (35 %) from polytriazine imide. High‐resolution imaging confirmed the intact crystalline structure and identified an AB stacking for gCN layers. The charge allows deliberate organic functionalisation of dissolved gCN, providing a general route to adjust their properties.     

1,3-Dichloro-2-butene: a useful precursor for the 2-butene-1,3-dianion and its corresponding 1,3-dipolar synthon

The reaction of 1,3-dicloro-2-butene (1; 5:1 Z:E-mixture) with lithium powder and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 1% molar) in the presence of different electrophiles [EtCHO, PrⁱCHO, Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, (c-C₃H₅)₂CO, Me₃SiCl] in THF at temperatures ranging between −78 and −50°C gives, after hydrolysis with water, the corresponding products 2 in different Z:E-ratios depending on the electrophile used. Treatment of some diols 2 with hydrochloric acid gives dienic alcohols 3 or substituted dihydropyrans 4, depending on the structure of the starting diol. Finally, the same dichlorinated starting material is transformed into the corresponding allylic amines derived from morpholine and benzyl methyl amine and submitted to the same DTBB-catalysed lithiation as above, so after reaction with different electrophiles [Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, Me₃SiCl] and final hydrolysis with water, compounds 7 are isolated having a Z-configuration. A mechanistic explanation for this behaviour is given.     

Preparation of quinoxalines, dihydropyrazines, pyrazines and piperazines using tandem oxidation processes

Alpha-hydroxyketones undergo MnO2-mediated oxidation followed by in situ trapping with aromatic or aliphatic 1,2-diamines to give quinoxalines or dihydropyrazines, respectively, in a one pot procedure which avoids the need to isolate the highly reactive 1,2-dicarbonyl intermediates. Modifications of the procedure allow the formation of pyrazines and piperazines.     

The protonation thermodynamics of cyclodextrin-containing polymers for drug inclusion

A poly(amido-amine), PAA, bearing β-CD units in the side chain was synthesized by a polyaddition reaction of 1,4-bis-acryloyl-piperazine with 6-monodeoxy-6-monoamino-β-cyclodextrin (β-CD-NH₂). Unlike the simple β-CD-NH₂ with a greater basicity constant (log K = 8.60), the polymer revealed an unusual polyelectrolyte behaviour with a lower basicity constant (log K° = 6.29) of the tertiary nitrogen atom, that is strongly dependent on the degree of protonation α of the whole macromolecule. It follows the modified Henderson–Hasselbalch equation with n = 1.75, in a wide α-range. The greater (?46.1 kJ/mol) and the lower (?27.6 kJ/mol) enthalpy (ΔH°) changes of the compounds were in line with the protonation of a primary or a tertiary nitrogen atom. The calorimetric data suggested that the PAA protonation destroyed a packing structure formed by two rigid β-CD side chains interacting head-to-head. The UV spectrophotometric data showed that the PAA exhibits affinity towards the l-ascorbic acid at low pH (pH 2.46) with an isosbestic point at 241 nm and a slight blue shift of the maximum absorption of the ascorbic acid (244 nm) on PAA additions.     

High-speed gradient parallel liquid chromatography/tandem mass spectrometry with fully automated sample preparation for bioanalysis: 30 seconds per sample from plasma

In this work, a high-throughput and high-performance bioanalytical system is described that is capable of extracting and analyzing 1152 plasma samples within 10 hours. A Zymark track robot system interfaced with a Tecan Genesis liquid handler was used for simultaneous solid-phase extraction of four 96-well plates in a fully automated fashion. The extracted plasma samples were injected onto four parallel monolithic columns for separation via a four-injector autosampler. The use of monolithic columns allowed for fast and well-resolved separations at a considerably higher flow rate without generating significant column backpressure. This resulted in a total chromatographic run cycle time of 2 min on each 4.6 x 100 mm column using gradient elution. The effluent from the four columns was directed to a triple quadrupole mass spectrometer equipped with an indexed four-probe electrospray ionization source (Micromass MUX interface). Hence, sample extraction, separation, and detection were all performed in a four-channel parallel format that resulted in an overall throughput of about 30 s per sample from plasma. The performance of this system was evaluated by extracting and by analyzing twelve 96-well plates (1152) of human plasma samples spiked with oxazepam at different concentrations. The relative standard deviation (RSD) of analyte sensitivity (slope of calibration curve) across the four channels and across the 12 plates was 5.2 and 6.8%, respectively. An average extraction recovery of 77.6% with a RSD of 7.7% and an average matrix effect of 0.95 with a RSD of 5.2% were achieved using these generic extraction and separation conditions. The good separation efficiency provided by this system allowed for rapid method development of an assay quantifying the drug candidate and its close structural analog metabolite. The method was cross-validated with a conventional liquid chromatography/tandem mass spectrometry (LC/MS/MS) assay.     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.