The nature of intermolecular CuI...CuI interactions: a combined theoretical and structural database analysis

The nature of intermolecular interactions between dicoordinate Cu(I) ions is analyzed by means of combined theoretical and structural database studies. Energetically stable Cu(I).Cu(I) interactions are only found when the two monomers involved in the interaction are neutral or carry opposite charges, thus allowing us to speak of bonding between the components of the bimolecular aggregate. A perturbative evaluation of the components of the intermolecular interaction energies, by means the IMPT scheme of Stone, indicates that both the Coulombic and dispersion forces are important in determining the Cu(I).Cu(I) bonding interactions, because only a small part of that energy is attributable to Cu.Cu interactions, while a large component results from Cu.ligand interactions. The electrostatic component is the dominant one by far in the interaction between charged monomers, while in the interaction between neutral complexes, the electrostatic component is found to be of the same order of magnitude as the dispersion term. Bimolecular aggregates that have like charges are repulsive by themselves, and their presence in the solid state results from anion.cation interactions with ions external to this aggregate. In these cases, the short-contact Cu.Cu interactions here should be more properly called counterion-mediated Cu.Cu bonds.     

Effects of citrate on the composition and enzymic coagulation of colloidal bovine casein aggregates

Colloidal casein aggregates (CCA) prepared from soluble whole bovine caseinates in the presence of Ca²⁺ and phosphate (Pi) ions by addition of different citrate (Cit) concentrations showed different mineral and proteic composition. Citrate concentration conditions the Ca and Pi concentrations incorporated into CCA, probably due to the complexing effect of this anion on calcium. A significant change in the incorporated Ca/Pi ratio at 8 mM citrate could very likely be associated to changes in CCA net charge. The incorporation of individual caseins to the colloidal particles obtained, as well as their average size and size distribution, depended also on the Cit concentration used [Cit]_P. α_S- and β-caseins assembled in the CCA structure sharply decreased at a [Cit]_P higher than 15 mM, i.e., at a low Ca²⁺ concentration in the aggregates, showing that the presence of this cation is necessary for the incorporation of these caseins. An inverse relationship between the aggregation step rate in CCA enzymic coagulation and their average size was observed. The aggregation rate vs the average size curve obtained at [Cit]_P 8 mM clearly differed from the curves obtained at 10 and 12 mM, respectively, a fact probably related to a change in the CCA net charge. This behavior showed the effect of citrate concentration on CCA functional properties.     

Magnetic properties of cyano-bridged Ln3+-M3+ complexes. Part I: trinuclear complexes (Ln3+ = La, Ce, Pr, Nd, Sm; M3+ = FeLS, Co) with bpy as blocking ligand

The reaction of Ln(NO3)3(aq) with K3[Fe(CN)6] or K3[Co(CN)6] and 2,2'-bipyridine in water/ethanol led to eight trinuclear complexes: trans-[M(CN)4(mu-CN)2{Ln(H2O)4(bpy)2}2][M(CN)6].8H2O (M = Fe3+ or Co3+, Ln = La3+, Ce3+, Pr3+, Nd3+, and Sm3+). The structures for the eight complexes [La2Fe] (1), [Ce2Fe] (2), [Pr2Fe] (3), [Nd2Fe] (4), [Ce2Co] (5), [Pr2Co] (6), [Nd2Co] (7), and [Sm2Co] (8) have been solved; they crystallize in the triclinic space group P and are isomorphous. They exhibit a supramolecular 3D architecture through hydrogen bonding and pi-pi stacking interactions. A stereochemical study of the nine-vertex polyhedra of the lanthanide ions, based on continuous shape measures, is presented. No significant magnetic interaction was found between the lanthanide(III) and the iron(III) ions.     

Conformational studies by dynamic NMR. 74.(1) stereomutations of the conformational enantiomers in peri-substituted 1-acylnaphthalenes

Naphthalenes bearing an acyl and a phenyl group in a peri relationship give rise to a pair of enantiomers in the temperature range where the rotations of the acyl group are slow. Such enantiomers were observed by means of low temperature NMR spectra in chiral environments. The barrier to rotation for the acyl substituents, that causes the interconversion of the enantiomers, was demonstrated to be lower than that for the phenyl group. In an appropriately synthesized derivative it was possible to measure the two barriers that were found equal to 10.4 and 15.9 kcal mol(-)(1), respectively. The barriers for the acyl group rotation increase regularly (from 9.5 to 13.2 kcal mol(-)(1)) with the increasing dimension of the RCO groups (R = Me, Et, Pr(i), Bu(t)). When a bromine atom replaces the phenyl group, the enantiomerization barrier for the corresponding acyl derivatives increases significantly.     

Determination of amino acids in apple extracts by high performance liquid chromatography

Summary A rapid and sensitive method for the simultaneous determination of primary amino acids in apple is described. After sample preparation, amino acids were derivatized with o-phthaldialdehyde/2-mercaptoethanol and separated on a reversed phase column with a gradient of phosphate buffer-tetrahydrofuran-methanol as the mobile phase. Detection was carried out with a fluorescence detector at excitation and emission wavelengths of 340 nm and 425 nm respectively. Recovery studies showed good results for all substances (91–109%) (with coefficients of variation ranging, from 0.1 to 9.0%). This method was applied to the monitoring of amino acids during the ripening of apples.     

Formation of a cyclobutylidene ring: intramolecular [2 + 2] cycloaddition of allyl and vinylidene C=C bonds under mild conditions

Intramolecular [2 + 2] cycloaddition of two C=C bonds in vinylidene complexes [Ru(eta5-C9H7){=C=C(R)H}(PPh3){kappa1-(P)-PPh2(C3H5)][BF4] affords cyclobutylidene complexes [Ru(eta5-C9H7){kappa2-(P,C)-(=CC(R)HCH2CHCH2PPh2)}(PPh3)][BF4], which can be also obtained by reaction of terminal alkynes with [Ru(eta5-C9H7)(PPh3){kappa3-(P,C,C)-PPh2(C3H5)}][PF6]. The reaction proceeds under mild conditions via vinylidene complexes, and the activation parameters were determined by kinetic studies.     

Acyclic Schiff base salts derived from 1,3‐diaminopropane and 1,3‐diamino‐2‐hydroxypropane

Two salts of acyclic Schiff base cationic ligands, namely N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride monohydrate, C₁₇H₂₂N₄O₄²⁺·2Cl⁻·H₂O, (I), and 2‐hydroxy‐N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride, C₁₇H₂₂N₄O₅²⁺·2Cl⁻, (II), were synthesized as precursors in order to obtain new acyclic and macrocyclic multidentate ligands and complexes. The cation conformations in compounds (I) and (II) are different in the solid state, although the cations are closely related chemically. Similarly, the hydrogen‐bonding networks involving ammonium cations, hydroxyl groups and chloride anions are also different. In the cation of compound (II), the hydroxyl group is disordered over two sets of sites, with occupancies of 0.785 (8) and 0.215 (8).     

Optimizing vehicle routes in a bakery company allowing flexibility in delivery dates

The work addressed in this paper is motivated from a real problem proposed to the authors by a bakery company in Northern Spain. The objective is to minimize the total distance travelled for the daily routes over the week. In order to reduce this total distance, some flexibility in the dates of delivery is introduced. A mixed-integer linear model for the problem is formulated. In addition, a two-phase method based in GRASP and path-relinking metaheuristic strategies is proposed. Computational experiments show that the method performs very well, obtaining high-quality solutions in short computational times. Moreover, when it is applied to real-data-based instances, the obtained solutions considerably reduce transportation costs over the planning horizon.     

Flash DSC crystallization study for blown film grade bimodal HDPE resins. I. Isothermal kinetics and its application of the blown film modeling

Isothermal ultra‐cooling crystallization tests were conducted on three blown film grade bimodal HDPE resins using an ultrafast scanning calorimeter, the Flash DSC. Isothermal tests were performed to study the regime transition, the thermal nucleation and the spherulitical growth using the Hoffman‐Lauritzen theory in a range between 90 °C and 116 °C. Temperature profile estimations using such data were in good agreement with actual blown film process data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2425–2431