A modular approach to marine macrolide construction. 4. Assembly of C36-C51 and C29-C44 building blocks and evaluation of key coupling reactions targeting spongistatin 1 (altohyrtin A)

Routes have been developed for the stereocontrolled elaboration of two highly functionalized sectors of spongistatin 1. The approach to ring F takes advantage of B-alkyl Suzuki-Miyaura coupling to install the C44-C45 bond. The E-ring pyran moiety was generated by acylation of an alpha-sulfonyl carbanion, the stereogenic centers of which were incorporated by sequential asymmetric aldol reactions. [structure: see text].     

Investigation of the radical product channel of the CH3COO2 + HO2 reaction in the gas phase

The reaction of CH(3)C(O)O(2) with HO(2) has been investigated at 296 K and 700 Torr using long path FTIR spectroscopy, during photolysis of Cl(2)/CH(3)CHO/CH(3)OH/air mixtures. The branching ratio for the reaction channel forming CH(3)C(O)O, OH and O(2) (reaction ) has been determined from experiments in which OH radicals were scavenged by addition of benzene to the system, with subsequent formation of phenol used as the primary diagnostic for OH radical formation. The dependence of the phenol yield on benzene concentration was found to be consistent with its formation from the OH-initiated oxidation of benzene, thereby confirming the presence of OH radicals in the system. The dependence of the phenol yield on the initial peroxy radical precursor reagent concentration ratio, [CH(3)OH](0)/[CH(3)CHO](0), is consistent with OH formation resulting mainly from the reaction of CH(3)C(O)O(2) with HO(2) in the early stages of the experiments, such that the limiting yield of phenol at high benzene concentrations is well-correlated with that of CH(3)C(O)OOH, a well-established product of the CH(3)C(O)O(2) + HO(2) reaction (via channel (3a)). However, a delayed source of phenol was also identified, which is attributed mainly to an analogous OH-forming channel of the reaction of HO(2) with HOCH(2)O(2) (reaction ), formed from the reaction of HO(2) with product HCHO. This was investigated in additional series of experiments in which Cl(2)/CH(3)OH/benzene/air and Cl(2)/HCHO/benzene/air mixtures were photolysed. The various reaction systems were fully characterised by simulations using a detailed chemical mechanism. This allowed the following branching ratios to be determined: CH(3)C(O)O(2) + HO(2)--> CH(3)C(O)OOH + O(2), k(3a)/k(3) = 0.38 +/- 0.13; --> CH(3)C(O)OH + O(3), k(3b)/k(3) = 0.12 +/- 0.04; --> CH(3)C(O)O + OH + O(2), k(3c)/k(3) = 0.43 +/- 0.10: HOCH(2)O(2) + HO(2)--> HCOOH + H(2)O + O(2), k(17b)/k(17) = 0.30 +/- 0.06; --> HOCH(2)O + OH + O(2), k(17c)/k(17) = 0.20 +/- 0.05. The results therefore provide strong evidence for significant participation of the radical-forming channels of these reactions, with the branching ratio for the title reaction being in good agreement with the value reported in one previous study. As part of this work, the kinetics of the reaction of Cl atoms with phenol (reaction (14)) have also been investigated. The rate coefficient was determined relative to the rate coefficient for the reaction of Cl with CH(3)OH, during the photolysis of mixtures of Cl(2), phenol and CH(3)OH, in either N(2) or air at 296 K and 760 Torr. A value of k(14) = (1.92 +/- 0.17) x 10(-10) cm(3) molecule(-1) s(-1) was determined from the experiments in N(2), in agreement with the literature. In air, the apparent rate coefficient was about a factor of two lower, which is interpreted in terms of regeneration of phenol from the product phenoxy radical, C(6)H(5)O, possibly via its reaction with HO(2).     

Enantioselective catalytic ring expansion of methylenecyclopropane carboxamides promoted by a chiral magnesium Lewis acid

A catalytic enantioselective ring expansion of monoactivated methylenecyclopropanes (MCP) in the presence of N-tosyl aldimines was developed using a chiral bis(oxazoline) ligand-MgI2 complex. After evaluation of ligands and optimization of the reaction conditions, the reaction has been applied to a variety of aromatic and heteroaromatic aldimines providing the corresponding trans-C2,C3-disubstituted methylenepyrrolidines in generally good yields (greater than 52%) and up to 86% ee. [reaction: see text].     

Determination of bitter orange alkaloids in dietary supplement Standard Reference Materials by liquid chromatography with atmospheric-pressure ionization mass spectrometry

A liquid chromatographic atmospheric-pressure ionization electrospray mass spectrometry (LC–API–ES–MS) method has been developed for the determination of five bitter orange alkaloids (synephrine, octopamine, n-methyltyramine, tyramine, and hordenine) in bitter orange-containing dietary supplement standard reference materials (SRMs). The materials represent a variety of natural, extracted, and processed sample matrices. Two extraction techniques were evaluated: pressurized-fluid extraction (PFE) and sonication extraction. The influence of different solvents, extraction temperatures, and pH were investigated for a plant material and a processed sample. The LC method uses a new approach for the separation of highly polar alkaloids. A fluorinated, silica-based stationary phase separated the five alkaloids and the internal standard terbutaline in less than 20 min. This method enabled the determination of the dominant alkaloid synephrine and other minor alkaloids in a variety of dietary supplement SRMs.     

Biosynthetic production of universally <Superscript>13</Superscript>C-labelled polyunsaturated fatty acids as reference materials for natural health product research

Long-chain polyunsaturated fatty acids (LCPUFA) including eicosapentaenoic acid (EPA, 20:5n-3) and docosahexaenoic acid (DHA, 22:6n-3) have become important natural health products with numerous proven benefits related to brain function and cardiovascular health. Not only are omega-3 fatty acids available in a plethora of dietary supplements, but they are also increasingly being incorporated as triglycerides into conventional foods, including bread, milk, yoghurt and confectionaries. Recently, transgenic oil seed crops and livestock have been developed that enhance omega-3 fatty acid content. This diverse array of matrices presents a difficult analytical challenge and is compounded further by samples generated through clinical research. Stable isotope ¹³C-labelled LCPUFA standards offer many advantages as research tools because they may be distinguished from their naturally abundant counterparts by mass spectrometry and directly incorporated as internal standards into analytical procedures. Further, ¹³C-labelled LCPUFAs are safe to use as metabolic tracers to study uptake and metabolism in humans. Currently, ¹³C-labelled LCPUFAs are expensive, available in limited supply and not in triglyceride form. To resolve these issues, marine heterotrophic microorganisms are being isolated and screened for LCPUFA production with a view to the efficient biosynthetic production of U-¹³C-labelled fatty acids using U-¹³C glucose as a carbon source. Of 37 isolates obtained, most were thraustochytrids, and either DHA or omega-6 docosapentaenoic acid (22:5n-6) were produced as the major LCPUFA. The marine protist Hyalochlorella marina was identified as a novel source of EPA and omega-3 docosapentaenoic acid (22:5n-3). As proof of principle, gram-level production of ¹³C-labelled DHA has been achieved with high chemical purity ( >99%) and high ¹³C incorporation levels (>90%), as confirmed by NMR and MS analyses. Finally, U-¹³C-DHA was enzymatically re-esterified to glycerol to yield a ¹³C-labelled tridocosahexaenoin.     

Chemical and strontium isotope characterization of rainwater in France: influence of sources and hydrogeochemical implications

Strontium isotope ratios and Ca2+, Na+, K+, Mg2+, Cl-, SO4(2-), NO3- and Sr2+ concentrations were measured in rainwater samples collected in four stations in France (Brest, Dax, Orleans and Clermont-Ferrand) over a period of 1 year. Each sample represented a monthly series of rain events. The chemical composition and the 87Sr/86Sr ratios of the rainwater samples varied considerably. Using Na concentrations as an indicator of marine origin, the proportion of marine and crustal elements was estimated from elemental ratios. Strontium isotopes were used to characterize the different sources using data from the four stations and the literature. Such sources include sea salts, crustal sources (carbonates, silicates and volcanic rocks) and anthropogenic sources (fertilizers, automobile exhausts, incinerators and urban heating).     

Effects of carrier pulse rate and stimulation site on modulation detection by subjects with cochlear implants

Most modern cochlear-implant speech processors convey speech-envelope information using amplitude-modulated pulse trains. The use of higher-rate carrier pulse trains allows more envelope detail in the signal. However, neural response properties could limit the efficacy of high-rate carriers. This study examined effects of carrier rate and stimulation site, on psychophysical modulation detection thresholds (MDTs). Both of these variables could affect the neural representation of the carrier and thus affect perception of the modulation. Twelve human subjects with cochlear implants were tested. Phase duration of symmetric biphasic pulses was modulated sinusoidally at 40 Hz. MDTs were determined for monopolar stimulation at two carrier rates [250 and 4000 pulses/s (pps)], three stimulation sites (basal, middle, and apical), and five stimulus levels (10%, 30%, 50%, 70%, and 90% of the dynamic range). MDTs were lower for 250 pps carriers than for 4000 pps carriers in 71% of the 180 cases studied. Effects of carrier rate were greatest at the apical stimulation site and effects of stimulation site on MDTs depended on carrier rate. The data suggest a distinct disadvantage to using carrier pulse rates as high as 4000 pps. Stimulation site should be considered in evaluating modulation detection ability.     

Determination of Phase Stability of Elemental Boron

Boron is an important element, used in applications from superhard materials to superconductors. Boron exists in several forms (allotropes) and, surprisingly, it was not known which form (α or β) is stable at ambient conditions. Through experiment, we quantify the relative stability of α‐boron and β‐boron as a function of temperature. The ground‐state energies of α‐boron and β‐boron are nearly identical. For all temperatures up to 2000 K, the complicated β‐boron structure is more stable than the simpler α‐boron structure at ambient pressure. Below 1000 K, β‐boron is entropically stabilized with respect to α‐boron owing to its partially occupied sites, whereas at higher temperatures β‐boron is enthalpically stabilized with respect to α‐boron. We show that α‐boron only becomes stable on application of pressure.     

From the Bench to the Field in Low‐Cost Diagnostics: Two Case Studies

Despite the growth of research in universities on point‐of‐care (POC) diagnostics for global health, most devices never leave the laboratory. The processes that move diagnostic technology from the laboratory to the field—the processes intended to evaluate operation and performance under realistic conditions—are more complicated than they might seem. Two case studies illustrate this process: the development of a paper‐based device to measure liver function, and the development of a device to identify sickle cell disease based on aqueous multiphase systems (AMPS) and differences in the densities of normal and sickled cells. Details of developing these devices provide strategies for forming partnerships, prototyping devices, designing studies, and evaluating POC diagnostics. Technical and procedural lessons drawn from these experiences may be useful to those designing diagnostic tests for developing countries, and more generally, technologies for use in resource‐limited environments.