Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Natural and artificial radionuclides in soils from Paraná State,Brazil

Soil samples from Paraná State, Brazil, were collected in 1991 and compared with others collected at the same location in March 1977 and at the end of 1983. Pedological analyses were practiced on these samples and¹³⁷Cs and²³²Th,²²⁶Ra and⁴⁰K activities were determined by gammaray spectrometry. A latitude dependence of¹³⁷Cs was found as well. It was impossible to determine the¹³⁷Cs contribution from Chernobyl nuclear accident because of low fallout and intense leaching, erosion and re-suspension in soils of regions with high annual precipitation. Natural radionuclides did not show such effects.     

Bond dissociation energies for radical dimers derived from highly stabilized carbon-centered radicals

[reaction: see text] The temperature dependence of the dissociation of dimers formed from highly stabilized carbon-centered radicals has been examined. Analysis of the data yields the bond dissociation energy (BDE) for the central head-to-head C-C bond in these compounds. For example, for the dimer derived from 3-phenyl-2-coumaranone, BDE is 23.6 kcal/mol and the C-C bond length 1.596 A, a rather long value for a sigma bond.     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.     

Validation of UV spectrophotometric and nonaqueous titration methods for the determination of carvedilol in pharmaceutical formulations

Ultraviolet (UV) spectrophotometric and nonaqueous volumetric methods are described for the determination of carvedilol in pharmaceutical formulations. Linearity, precision, and accuracy were evaluated according to the validation guidelines of the International Conference on Harmonization and the United States Pharmacopeia for both methods. The UV spectrophotometric procedure was performed in ethanol at 244 nm. Good linearity was obtained between 2 and 7 microg/mL with a correlation coefficient of 0.9999. The intra- and interday precision values were <2% for all samples analyzed. The accuracy, determined from recovery studies, was between 97.5 and 102.2%. The other procedure was based on the volumetric quantitation of carvedilol in a nonaqueous medium with 0.01 M perchloric acid and 1% violet crystal as the indicator. The validation of the volumetric method yielded good results that included linearity (r of > 0.999), precision (relative standard deviations of <2% for intra- and interday precision), and accuracy (96.4-102.4%). The methods were applied to tablets and compounded capsules. Statistical analysis by analysis of variance showed no significant difference between the results obtained by the proposed methods.     

Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

Improved coupled-column liquid chromatographic method for the determination of glyphosate and aminomethylphosphonic acid residues in environmental waters

An existing method for the determination of glyphosate and its main metabolite aminomethylphosphonic acid (AMPA) in water has been improved. It is based on precolumn derivatization with the fluorescent reagent 9-fluorenylmethylcloroformate (FMOC) followed by large-volume injection in a coupled-column LC system using fluorescence detection (LC-LC-FD). The derivatization step was slightly modified by changing parameters such as volume and/or concentration of sample and reagents to decrease the limits of quantification (LOQ) of glyphosate and AMPA to 0.1 microg/l. Additionally, the use of Amberlite IRA-900 for preconcentration of glyphosate, prior to the derivatization step, was investigated; the LOQ of glyphosate was lowered to 0.02 microg/l. Drinking, surface and ground water spiked with glyphosate and AMPA at 0.1-10 microg/l concentrations were analysed by the improved LC-LC-FD method. Recoveries were 87-106% with relative standard deviations lower than 8%. Drinking and ground water spiked with glyphosate at 0.02 and 0.1 microg/l were analysed after preconcentration on the anion-exchange resin with satisfactory recoveries (94-105%) and precision (better than 8%).     

Anion-pi interactions in cyanuric acids: a combined crystallographic and computational study

Several structures of pi complexes of isocyanuric acid and of several thio derivatives with anions have been computed by using high level ab initio calculations. The nature of the complexes has been studied by means of the method of molecular interaction potential with polarization (MIPp) and Bader's theory of atoms-in-molecules. These molecules form favorable complexes with anions and can be used as binding units for building receptors for the molecular recognition of anions. In several cases, the anion-pi interaction has been demonstrated experimentally by means of X-ray crystallography.     

Playing with the weakest supramolecular interactions in a 3D crystalline hexakis[60]fullerene induces control over hydrogenation selectivity

Weak forces can play an essential role in chemical reactions. Controlling such subtle forces in reorganization processes by applying thermal or chemical stimuli represents a novel synthetic strategy and one of the main targets in supramolecular chemistry. Actually, to separate the different supramolecular contributions to the stability of the 3D assemblies is still a major challenge. Therefore, a clear differentiation of these contributions would help in understanding the intrinsic nature as well as the chemical reactivity of supramolecular ensembles. In the present work, a controlled reorganization of an hexakis[60]fullerene-based molecular compound purely governed by the weakest van der Waals interactions known, i.e. the dihydrogen interaction – usually called sticky fingers – is illustrated. This pre-reorganization of the hexakis[60]fullerene under mild conditions allows a further selective hydrogenation of the crystalline material via hydrazine vapors exposure. This unique two-step transformation process is monitored by single-crystal to single-crystal diffraction (SCSC) which allows the direct observation of the molecular movements in the lattice and the subsequent solid–gas hydrogenation reaction.

Weak forces play an essential role in chemistry. Controlling these supramolecular interactions will contribute to the creation dynamic absorbent materials with a variety of technological applications as chemosensors and environmental remediation.     

Determination of manganese in ores by activation analysis using a californium-252 neutron source

A²⁵²Cf neutron source has been used to analyse manganese in ores such as pyrolusite, rodonite (manganese silicate) and blends used in dry-batteries. Samples with about 150 mg and standards of manganese dioxide were irradiated for about 20 min and counted using a well-type NaI(Tl) scintillation counter and scaler, with or without pulse-height discriminator between the detector and the scaler. The interferences of nuclear reactions⁵⁶Fe(n,p)⁵⁶Mn and⁵⁹Co(n,α)⁵⁶Mn were studied, as well as problems in connection with neutron shadowing during irradiation, gamma-rays attenuation during counting and influence of granulometry of samples. Some of the samples were also analysed by wet-chemical method (sodium bismuthate) in order to compare results.