Determination of trace metals in industrial boron carbide by solid sampling optical emission spectrometry. Optimization of DC arc excitation (current, atmosphere and chemical modifier)

Graphite arc emission spectrometry has become possible as a result of the invention of novel types of optical spectrometers with Echelle-optics and semiconductor array detectors, and by the application of electronically controlled, high current arc generators. An optimization of the excitation parameters to boron carbide analysis is reported here, measuring background corrected line intensities that were integrated for the time of total evaporation of 5 mg boron carbide sample with or without added chemical modifiers. The following set of experimental conditions were compared with respect of analytical sensitivity and precision: (A) no modifier, Ar + O₂ (20%), 16 A; (B) sample + graphite powder (1 + 1), Ar + O₂ (20%), 16 A; (C) sample + CaF₂ (1 + 1), Ar, 25 A; (D) sample + CaF₂ + graphite powder (1 + 1 + 1), Ar, 25 A. The graphite powder modifier resulted in improved precision in general, and the CaF₂ was effective as a plasma ionization buffer and fluorinating agent. The best compromise was found under conditions B, when oxygen was present in the discharge atmosphere. This is likely due to the stepwise conversion of the boron carbide matrix to the more volatile boron oxide. Under conditions B, detection limits in the ranges of 0.3–9 μg g⁻¹ for Al, Ca, Cr, Cu, Fe, Mg, Mn and Si and that of 18–38 μg g⁻¹ for Ti, W, and Zr were attained. Average RSDs of 10.2 and 9.7% were found, respectively, without and with internal referencing to boron.     

The far infrared spectra of metal chloride complexes of pyridine in relation to their structures

The infrared spectra of the complexes [M(py)₂Cl₂] (py = pyridine; M = Mn, Fe, Co, Ni, Cu, Zn) have been determined within the range 650–150 cm^?1. Assignments of the metal—nitrogen and metal—halogen stretching frequencies (vM—N and vM—Cl) are made on the basis of the band shifts induced by deuteration of the pyridine ring and by varying the coordinated metal ion. If the band of lowest frequency is assigned to a bending mode, the number of vM—N and vM—Cl bands observed agrees with the number required by symmetry considerations based on the known structures of the complexes. On the basis of this work, some earlier assignments have been revised.     

Spektrofotometrische bestimmung von calciumspuren nach ihrer abtrennung aus konzentrierten Lithiumchlorid-Lösungen mittels kationenaustausch

Calcium was separated from 1–2 M solutions of lithium chloride by means of Wofatit CP cation exchanger. Calcium was quantitatively separated from lithium by elution with 1 M ammonium chloride. Calcium, was eluted with hydrochloric acid and, eventually, measured spectrophotometrically at 567 mμ after addition of buffer and cresolphthalexone. The sensitivity was found to be 0.002 μg Ca/cm2 and Beer's law was obeved up to 15 μg Ca. With l g of lithium, the limit of determination was 10^-4% Ca.     

Base-induced heterochiral dimerization of an oxiranyl carbaldimine: stereoselective synthesis of a highly functionalized aziridine

[reaction: see text] Treatment of the oxiranyl carbaldimine with base (LDA or LDA/KOtBu) leads in an one-step procedure to the polyfunctionalized aziridine. This highly diastereoselective reaction is explained by a new type of an Aza-Darzens reaction, in which one enantiomer of the starting material is deprotonated to form an oxiranyl anion, which attacks the imine carbon atom of the other enantiomer (mutual kinetic resolution by double diastereofacial selection).     

Rheology of gelling polymers in the Zimm model

In order to study rheological properties of gelling systems in dilute solution, we investigate the viscosity and the normal stresses in the Zimm model [B. H. Zimm, J. Chem. Phys. 24, 269 (1956)]. for randomly cross-linked monomers. The distribution of cluster topologies and sizes is assumed to be given either by Erdos-Renyi random graphs or three-dimensional bond percolation. Within this model the critical behavior of the viscosity and of the first normal stress coefficient is determined by the power-law scaling of their averages over clusters of a given size n with n. We investigate these scaling relations numerically and conclude that the scaling exponents are independent of the hydrodynamic interaction strength. The numerically determined exponents agree well with experimental data for branched polymers. However, we show that this traditional model of polymer physics is not able to yield a critical divergence at the gel point of the viscosity for a polydisperse dilute solution of gelation clusters. A generally accepted scaling relation for the Zimm exponent of the viscosity is thereby disproved.     

A (bpy)2Ru-coordinated dehydro[12]annulene with exotopically fused diimine binding sites

Synthesis and electronic properties of a dinuclear (bpy)(2)Ru(II) polypyridyl complex are described in which the bridging ligand consists of two dipyridophenazines fused to a formally antiaromatic dehydro[12]annulene and where the electronic and electrochemical properties of the complex are markedly influenced by the cyclic all-carbon core.     

Sonic spray ionization applied to liquid chromatography/mass spectrometry analysis of endocrine-disrupting chemicals in environmental water samples

A sonic spray ionization liquid chromatography/mass spectrometry (LC/SSI-MS) procedure combined with off-line solid-phase extraction was optimized for the analysis of 20 endocrine-disrupting chemicals (EDCs) in water samples. Method development included a comparison of the novel sonic spray ionization (SSI) with more traditional ion sources, i.e. pneumatically assisted electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI). It was demonstrated that SSI and ESI spectra were very similar, but were more prone to the formation of solvent cluster ions as compared with APCI spectra. This phenomenon was most prominent for SSI and resulted in an increased chemical background in full-scan mass spectra. However, this chemical noise did not affect the overall sensitivity of SSI and ESI. After optimization of LC and MS parameters, the LC/SSI-MS method was validated. Recoveries ranged from 76.3 up to 113.4% for all compounds. Limits of detection (LOD) and quantitation (LOQ) were established between 3.0 and 11.5 ng/L and 9.9 and 38.0 ng/L, respectively. Within-day (n = 5) and between-day (n = 5) reproducibility were investigated at three levels and ranged from 3.3-16.5% and 7.6-19.2%, respectively. Eight-point calibration curves were established and showed linearity for all compounds (r(2) > 0.987) over a linear dynamic range of 10-10 000 ng/L.     

“Stat” methods in continuous flow analysis : Determination of Copper,Iron, Iodide and Hydrochloric Acid

A continuous flow “stat” method is described in which a certain arbitrarily imposed state in the flowing stream is automatically maintained by regulating the rate of flow of one of the components. The electronic system is regulated by measuring a physical phenomenon in the flowing solution. The method is illustrated by the examples of a continuous flow absorptiostat [Fe(III)/S₂O₃^2-/Cu(II)]for determinations of copper(II) (1–10 μg ml^-1), iron(III) (25–250 or 12.5–125 μg ml^-1), as well as for determination of iodide (12.8–128 μg ml^-1). A continuous flow conductostat [HCl/NaOH] for determination of 1–2.5 × 10^-4 M HCl is also described. This analytical technique is intended for automatic continuous monitoring of sample streams.     

Miniaturization of a thalliumiodide photodissociation laser

We report on the operation of a thallium photodissociation laser with an active medium in the form of a thin layer on a quartz wall. Laser emission has been obtained with layer thicknesses below 100 m. This gas laser seems to be feasible with an active volume as small as 10^–1 to 10^–2 mm³.     

Spin precession of Po in Ni detected by In-beam conversion electrons and the magnetic moment of the 15− isomer in204Po

The magnetic moment of the 11 ns, 15^? isomer in²⁰⁴Po and the internal magnetic field of Po in Ni were determined in an in-beam recoil implantation experiment. Time-differential perturbed angular distributions of conversion electrons were measured in an iron-free orange spectrometer. The magnetic hyperfine field of ¦H(PoNi)¦=555(22) kOe is in agreement with the systematic trend for the 6p elements. Theg-factorg(15^?) =0.41(2) is discussed, together with theB (E2, 15^?→13^?). within the shell model.