Einige Aspekte der Quantitativen Röntgenemissionsanalyse Leichter Elemente bei Anregung Mit Schweren Teilchen

The aim of the paper is the simplification of calibration procedures in the investigation of multi-element-systems by calculating calibration curves. This requires, as well as taking into account the measuring geometry and the detector properties, above all the calculation of the number of the characteristic X-rays emitted by the sample per incident particle. For the calculation of the thick target yield a computer programme has been developed which makes possible a simple exchange of subroutines describing the stopping power of the sample, the cross-section of K-shell ionization, the fluorescence yield and the matrix absorption for the resulting K-X-rays of the elements contained in the sample. The agreement between experiment and calculation is discussed, when various approximations for the functions mentioned are used, as well as the possible influence of the grain size and surface roughness of the samples on the measurements, on which the calculations are based.      

Kinetic Salt Effect in the 18O-Exchange Reaction between Bromate and Water

The kinetic salt effect in the ¹⁸O-exchange reaction between bromate ion and water has been investigated at 60° in a range of ionic strength from 0.02M < I < 1.9M using NaNO₃ or NaClO₄ as inert salts. From the experimental data the following relation was deduced for the uncatalysed reaction path In the H⁺-catalysed reaction path the Brønsted-Davies equation was obeyed up to I ? 0.1M At I > 0.8M the sign of Δ logk₂/Δ I^1/2 was positive. The theoretical interpretation of these results is consistent with the mechanistic evidence obtained previously from the rate law and the solvent isotope effects.     

Selektivierung geringer Mengen Kupfer mit Polyäthylenimin-Zellulose

Zusammenfassung Polyäthyleniminzellulosen sorbieren Cu²⁺ durch koordinative Bindung als Zentralion des sekundären Stickstoffs des Polyäthylenimins im P_H-Bereich 3,5 bis 4,5 selektiv aus verd. Lösungen. 10g Kupfer können von 10⁵fachen Überschüssen anderer Übergangsmetalle separiert, mit verd. Salzsäure eluiert und mit Diäthyldithiocarbamat photometrisch bestimmt werden. Das Verfahren eignet sich zur Erfassung von 0,001% Kupfer in Zink, Mangan, Kobalt, Nickel, Cadmium und Aluminium sowie aus Lösungen, deren Kupfergehalt 0,02 ppm beträgt.

---

Selectivation of small amounts of copper with polyethyleneimine-cellulose

Summary Polyethyleneimine celluloses selectively sorb Cu²⁺ from dilute solutions through coordinative bonding as central ion of the secondary nitrogen of polyethyleneimine in the p_H-range of 3.5–4.5. 10g of copper may be separated from 10₅-fold excesses of other transition metals, then eluted with dilute hydrochloric acid and determined photometrically with diethyldithiocarbamate. The method is suitable for determining 0.001% copper in zinc, manganese, cobalt, nickel, cadmium, and aluminium as well as in solutions whose coppercontent is 0.02 ppm.

     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

Schnelle Trennung von Rückstoßprodukten in der Gasphase

Experiments are described in which recoil products are separated fast and selectively. The aim of these investigations is an identification of short-lived nuclides, either for the study of nuclear reactions or for the study of decay properties of new products. The recoil products were provided by a Cf-252 source. The transportation zone and the identification zone could be heated to different temperatures. Using N₂ as carrier gas it was possible to separate Te selectively under certain experimental conditions. When Cl₂ was added, Sb, Tc, Nb, Mo, Zr, Ru and Sn were transported. Transport output was determined in dependence of temperature and composition of the gas.     

Self-Assembly of Gold Nanoclusters on Molecularly Modified GaAs

The elaboration of closed-packed monolayers of Au₅₅(PPh₃)₁₂Cl₆ clusters on oxidized and non-oxidized GaAs surfaces is reported. The first part of this work describes the use of silanethiol modified GaAs oxide surfaces to trap 18 nm gold colloids and Au₅₅(PPh₃)₁₂Cl₆ clusters. The surfaces characterized by AFM measurements present high-quality coverage on a quite long range for both metallic species. The second part is devoted to the elaboration of Au₅₅(PPh₃)₁₂Cl₆ cluster monolayers on non-oxidized p-type GaAs substrates, functionalized with dithiol molecules. AFM measurements demonstrate the presence of closed-packed two-dimensional arrangements of Au₅₅ clusters.     

Pfropfcopolymerisation von Cellulose mit zwei Vinylmonomeren

Zusammenfassung Die vorliegende Arbeit stellt eine Beschreibung von Experimenten dar, die die Erhöhung der Pfropfbereitschaft von trägen Komponenten durch Beimischung von aktiveren zum Ziele hatten.Das Trägermolekül war in allen Fällen Cellulose in Form von hochgradig gereinigtem Zellstoff. Durch die Verwendung von Mischsystemen aus Styrol und Methylmethacrylat gelang es, das trägere Styrol in bedeutend größerer Menge auf die Cellulose aufzupfropfen, als es bei Abwesenheit des aktiven Methylmethacrylats der Fall war.

---

Grafting Polymerization of Cellulose with Two Vinyl Monomers

This paper describes experiments to increase the grafting of cellulose with components of poor reactivity by mixing them with highly reactive ones. A highly purified wood pulp was used as backbone. Using combinations of styrene and methyl methacrylate it was possible to graft considerably higher amounts of the poorly reacting styrene than in the absence of the highly reactive methyl methacrylate.

---

---

Nach einem Vortrag, den der erstgenannte der Autoren im Rahmen der Arbeitstagung des Vereins Österreichischer Chemiker am 27. September 1968 in Wien gehalten hat.     

Low temperature absorption spectra of TcO 4 − and ReO 4 − in KClO4

The low temperature spectra of TcO ₄ ^– and ReO ₄ ^– both show two band systems with pronounced vibrational structures. The bands are identified as¹ A ₁¹ T ₂ transitions. No other bands are observed with certainty. It seems likely that the KClO₄ crystals contain KReO₄ crystallites. They are therefore not pure mixed crystals. It is concluded that the virtual orbital (2e) used in the construction of the low lying states resembles an atomic nd orbital more and more when going from n=3, Mn to n=5, Re.

---

Zusammenfassung Die Tieftemperaturspektren von TcO ₄ ^– und ReO ₄ ^– zeigen beide zwei Bandensysteme mit ausgeprägten Schwingungsstrukturen. Die Banden werden als ¹ A ₁¹ T ₂-Übergänge identifiziert. Keine anderen Banden werden mit Sicherheit beobachtet. Es scheint wahrscheinlich, daß die KClO₄-Kristalle KReO₄-Kristallite enthalten und deswegen keine reinen Mischkristalle sind. Es wird geschlossen, daß das virtuelle Orbital (2e), welches zur Konstruktion der tiefliegenden Zustände gebraucht wird, in der Reihe n=3, Mn bis n=5, Re immer weitgehender einem nd-Atomorbital ähnelt.

---

---

Nachwuchsstipendiat, Schweizerischer Nationalfonds.     

Chloridionenübergänge in Phenylphosphoroxychlorid, 1. Mitt.: Spektrophotometrische Untersuchungen an Eisen (III)-chlorid-Lösungen

Zusammenfassung FeCl₃ liegt in PhPOCl₂ als roter solvatisierter Komplex, in Gegenwart von polaren Chloriden als gelbes [FeCl₄]^–-Ion vor. BCl₃, SnCl₄, TiCl₄, PCl₅ und wahrscheinlich auch HgCl₂ und SbCl₃ geben an FeCl₃ je 1 Chloridion ab, ZnCl₂ gibt beide Chloridionen und AlCl₃ zwei Chloridionen fast vollständig und ein drittes in geringem Umfang ab. Die Donorstärke nimmt in der Reihe KClEt₄NCl>1/2 AlCl₃>-TiCl₄>PCl₅>1/2 ZnCl₂>BCl₃ SnCl₄[AlCl]⁺⁺>HgCl₂>SbCl₃ ab. Als Chloridionenakzeptor ist nur SbCl₅ dem FeCl₃ ebenbürtig, die oben genannten Chloride sind wesentlich schwächere Akzeptoren.Mit 4 AbbildungenHerrn Professor Dr.L. F. Audrieth zum 60. Geburtstag gewidmet.     

Buchbesprechungen

Ohne Zusammenfassung