Conductive sub-micrometric wires of platinum-carbonyl clusters fabricated by soft-lithography

Conductive wires of sub-micrometer width made from platinum-carbonyl clusters have been fabricated by solution-infilling of microchannels as in microinject molding in capillaries (MIMIC). The process is driven by the liquid surface tension within the micrometric channels followed by the precipitation of the solute. Orientation of supramolecular crystalline domains is imparted by the solution confinement combined with unidirectional flow. The wires exhibit ohmic conductivity with a value of 0.2 S/cm that increases, after thermal decomposition of the platinum-carbonyl cluster precursor to Pt, to 35 S/cm.     

Putative palytoxin and its new analogue,ovatoxin-a,in <Emphasis Type="Italic">Ostreopsis ovata</Emphasis> collected along the ligurian coasts during the 2006 toxic outbreak

In this article we report on the liquid chromatography tandem mass spectrometry (LC-MS) investigation of plankton samples collected in the summer of 2006 along the Ligurian coasts, coinciding with a massive bloom of the tropical microalga Ostreopsis ovata. LC-MS analyses indicated the occurrence of putative palytoxin along with a much more abundant palytoxin-like compound never reported so far, which we named ovatoxin-a. On the basis of molecular formula, fragmentation pattern, and chromatographic behavior, the structure of ovatoxin-a appeared to be strictly related to that of palytoxin. We report also on the analysis of cultured O. ovata, which was necessary to unequivocally demonstrate that putative palytoxin and ovatoxin-a contained in field samples were actually produced by O. ovata itself.     

Ultraviolet-based bonding for perfluoropolyether low aspect-ratio microchannels and hybrid devices

Producing solvent-resistant microfluidic devices is a challenge for analytical chemistry and biochemistry. We demonstrate a simple and low-cost fabrication approach for the realization of solvent-resistant microchannels based on perfluoropolyether elastomers, exhibiting very low aspect ratios (0.01). The strength of the microchannels sealing is evaluated through the maximum internal pressure (1.52 MPa) prior to device failure, due to delamination at the bonded interface. This approach allows the elastic properties of silicone elastomers, suitable for high quality external connections, to be combined with the non-swelling character of perfluoropolyethers.     

Bimetallic Fe–Cu Carbido Carbonyl Clusters Obtained from the Reactions of [Fe<Subscript>4</Subscript>C(CO)<Subscript>12</Subscript>{Cu(MeCN)}<Subscript>2</Subscript>] with N-Donor Ligands

The reaction of [Fe₄C(CO)₁₂{Cu(MeCN)}₂] (1) with 3 equivalents of L–L (phen or Me₂phen) affords [Cu(L–L)₂][Fe₄C(CO)₁₂{Cu(L–L)}] (L–L = phen, 2; Me₂phen, 3) in good yields. These are protonated by strong acids resulting in [HFe₄C(CO)₁₂{Cu(L–L)}] (L–L = phen, 4; Me₂phen, 5). The reaction may be reversed with bases, resulting in the quaternary ammonium salts [NR₄][Fe₄C(CO)₁₂{Cu(phen)}] (6). 4 and 5 react with a slight excess of L–L resulting in the elimination of copper in the form of [Cu(L–L)₂]⁺ and formation of the previously reported [HFe₄C(CO)₁₂]^? homometallic cluster. Conversely, the reaction of 1 with a monodentate N-ligand such as quinoline, even if used in large excess, results in the substitution product [Fe₄C(CO)₁₂{Cu(quinoline)}₂] (8), which is then transformed into [Cu(Me₂phen)₂] [Fe₄C(CO)₁₂{Cu(quinoline)}] (9) after reaction with Me₂phen. By using the anionic cluster [Fe₅C(CO)₁₄{Cu(MeCN)}]^? instead of the neutral 1, only substitution has been observed by using both phen and quinoline, resulting in [Fe₅C(CO)₁₄{Cu(phen)}]^? (10) and [Fe₅C(CO)₁₄{Cu(quinoline)}]^? (11), respectively. Finally, the reaction of 1 with [Ru(tpy)(bpy)(N₄C-C₆H₄-CN)]Cl affords crystals of [Fe₄C(CO)₁₂Cu₂Cl{Ru(tpy)(bpy)(N₄C-C₆H₄-CN)}] (12). All compounds 2-12 have been characterized by a combination of spectroscopic (IR, NMR) and crystallographic methods. All these clusters may be viewed as composed by a butterfly [Fe₄C(CO)₁₂]^2? core bonded to Cu(I) fragments and/or H⁺ ions.     

Interactions of a water-soluble calix[4]arene with spermine: solution and solid-state characterisation

Abstract

The octaanionic 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)-calix[4]arene (cone conformation) (C₄TsTc) was investigated as a sensor for the biogenic tetracationic polyamine, spermine _.(H₄Spe⁴⁺). Fluorescence titration experiments of the water-soluble calixarene with spermine showed the formation of the 2:1 and 1:1 calixarene:spermine complexes in solution. The single crystal X-ray diffraction analysis of [(NaC₄TsTc)₄·(H₄Spe)₇] confirmed the formation of 2:1 and 1:1 calixarene:spermine species and showed that the water-soluble calixarene binds the spermine either by partially hosting it in the inner cavity or through the carboxylate groups on the lower rim. In order to investigate the effect of multivalent systems, supramolecular assemblies of octaanionic calixarene molecules templated by meso-tetrakis(4-N-methylpyridyl)porphyrin (H₂T₄) in different stoichiometric porphyrin:calixarene ratios (1:4 and 3:4) were also tested for spermine binding in solution. Fluorescence titration experiments with the 1:4 and 3:4 H₂T₄:C₄TsTc supramolecular complexes showed that the multivalent assemblies are more sensitive to the presence of spermine than the calixarene alone.     

New hybrid semiconductor materials based on viologen salts of bimetallic Fe-Pt and Fe-Au carbonyl clusters: first structural characterization of the diradical pi-dimer of the diethylviologen monocation and EPR evidence of its triplet state

The synthesis, structure, spectroscopic characterization and electrical resistivity of the [EtV](2)[Fe(4)Pt(CO)(16)], [EtV][Fe(3)Pt(3)(CO)(15)].THF, [EtV][Fe(4)Au(CO)(16)](2)2.THF (EtV=1,1'-diethyl-4,4'-bipyridilium cation) and [NEt(4)](2)[Fe(4)Au(CO)(16)] is reported. The crystal structure of [EtV](2)[Fe(4)Pt(CO)(16)] is based on infinite stacks of [(EtV)(*+)](2) pi-dimers rotated by 90 degrees and isolated [Fe(4)Pt(CO)(16)](2-) ions. Within each pi-dimer, the [EtV](*+) radical ions are perfectly eclipsed and the distance between their mean planes is 3.275 A. The EPR spectrum of the solid material at room temperature clearly indicates the presence of a significantly populated triplet state of the pi-dimer, by showing signals both at Deltam=1 and Deltam=2. The solid-state structure of [EtV][Fe(3)Pt(3)(CO)(15)].THF is based on the ionic packing of [EtV](2+) and [Fe(3)Pt(3)(CO)(15)](2-) ions, inferred from a comparison of their molecular parameters with literature data. Significant electron transfer could have been expected to give [EtV](*+)[Fe(3)Pt(3)(CO)(15)](*-) on the basis of their formal redox potentials. In spite of their different stoichiometries, the structures of [EtV][Fe(4)Au(CO)(16)](2).2 THF and [NEt(4)](2)[Fe(4)Au(CO)(16)] both contain an isomer of the monoanion [Fe(4)Au(CO)(16)](-) in solution (previously characterized in the solid state as a [NMe(3)CH(2)Ph](2)[Fe(4)Au(CO)(16)]Cl mixed salt). Resistivity measurements on pellets of powdered samples of the above compounds indicate that their tetrasubstituted ammonium salts, and complex [EtV][Fe(4)Au(CO)(16)](2)2.THF, largely behave as insulators. However, the [EtV](2)[Fe(4)Pt(CO)(16)] and [EtV][Fe(3)Pt(3)(CO)(15)].THF samples respectively display resistivities 3 and 4 orders of magnitude less than those of their corresponding ammonium salts and could be classified as semiconductor materials.     

The Maillard Reaction as Source of Meat Flavor Compounds in Dry Cured Meat Model Systems under Mild Temperature Conditions

Flavor is amongst the major personal satisfaction indicators for meat products. The aroma of dry cured meat products is generated under specific conditions such as long ripening periods and mild temperatures. In these conditions, the contribution of Maillard reactions to the generation of the dry cured flavor is unknown. The main purpose of this study was to examine mild curing conditions such as temperature, pH and a_w for the generation of volatile compounds responsible for the cured meat aroma in model systems simulating dry fermented sausages. The different conditions were tested in model systems resembling dry fermented sausages at different stages of production. Three conditions of model system, labeled initial (I), 1st drying (1D) and 2nd drying (2D) and containing different concentrations of amino acid and curing additives, as well as different pH and a_w values, were incubated at different temperatures. Changes in the profile of the volatile compounds were investigated by solid phase microextraction and gas chromatography mass spectrometry (SPME-GS-MS) as well as the amino acid content. Seventeen volatile compounds were identified and quantified in the model systems. A significant production of branched chain volatile compounds, sulfur, furans, pyrazines and heterocyclic volatile compounds were detected in the model systems. At the drying stages, temperature was the main factor affecting volatile production, followed by amino acid concentration and a_w. This research demonstrates that at the mild curing conditions used to produce dry cured meat product volatile compounds are generated via the Maillard reaction from free amino acids. Moreover, in these conditions a_w plays an important role promoting formation of flavor compounds.     

Alpha-Lipoic Acid Plays a Role in Endometriosis: New Evidence on Inflammasome-Mediated Interleukin Production,Cellular Adhesion and Invasion

Endometriosis is an estrogen-linked gynecological disease defined by the presence of endometrial tissue on extrauterine sites where it forms invasive lesions. Alterations in estrogen-mediated cellular signaling seems to have an essential role in the pathogenesis of endometriosis. Higher estrogen receptor (ER)-β levels and enhanced ER-β activity were detected in endometriotic tissues. It is well known that ER-β interacts with components of the cytoplasmic inflammasome-3 (NALP-3), the NALP-3 activation increases interleukin (IL)-1β and IL-18, enhancing cellular adhesion and proliferation. Otherwise, the inhibition of ER-β activity suppresses the ectopic lesions growth. The present study aims to investigate the potential effect of α-lipoic acid (ALA) on NALP-3 and ER-β expression using a western blot analysis, NALP-3-induced cytokines production by ELISA, migration and invasion of immortalized epithelial (12Z) and stromal endometriotic cells (22B) using a 3D culture invasion assay, and matrix-metalloprotease (MMPs) activity using gelatin zymography. ALA significantly reduces ER-β, NALP-3 protein expression/activity and the secretion of IL-1β and IL-18 in both 12Z and 22B cells. ALA treatment reduces cellular adhesion and invasion via a lower expression of adhesion molecules and MMPs activities. These results provide convincing evidence that ALA might inhibit endometriosis progression.     

Polymerization Isomerism in Co-M (M = Cu,Ag, Au) Carbonyl Clusters: Synthesis,Structures and Computational Investigation

The reaction of [Co(CO)₄]⁻ (1) with M(I) compounds (M = Cu, Ag, Au) was reinvestigated unraveling an unprecedented case of polymerization isomerism. Thus, as previously reported, the trinuclear clusters [M{Co(CO)₄}₂]⁻ (M = Cu, 2; Ag, 3; Au, 4) were obtained by reacting 1 with M(I) in a 2:1 molar ratio. Their molecular structures were corroborated by single-crystal X-ray diffraction (SC-XRD) on isomorphous [NEt₄][M{Co(CO)₄}₂] salts. [NEt₄](3)represented the first structural characterization of 3. More interestingly, changing the crystallization conditions of solutions of 3, the hexanuclear cluster [Ag₂{Co(CO)₄}₄]²⁻ (5) was obtained in the solid state instead of 3. Its molecular structure was determined by SC-XRD as Na₂(5)·C₄H₆O₂, [PPN]₂(5)·C₅H₁₂ (PPN = N(PPh₃)₂]⁺), [NBu₄]₂(5) and [NMe₄]₂(5) salts. 5 may be viewed as a dimer of 3 and, thus, it represents a rare case of polymerization isomerism (that is, two compounds having the same elemental composition but different molecular weights) in cluster chemistry. The phenomenon was further studied in solution by IR and ESI-MS measurements and theoretically investigated by computational methods. Both experimental evidence and density functional theory (DFT) calculations clearly pointed out that the dimerization process occurs in the solid state only in the case of Ag, whereas Cu and Au related species exist only as monomers.     

The Different Facets of Triclocarban: A Review

In the late 1930s and early 1940s, it was discovered that the substitution on aromatic rings of hydrogen atoms with chlorine yielded a novel chemistry of antimicrobials. However, within a few years, many of these compounds and formulations showed adverse effects, including human toxicity, ecotoxicity, and unwanted environmental persistence and bioaccumulation, quickly leading to regulatory bans and phase-outs. Among these, the triclocarban, a polychlorinated aromatic antimicrobial agent, was employed as a major ingredient of toys, clothing, food packaging materials, food industry floors, medical supplies, and especially of personal care products, such as soaps, toothpaste, and shampoo. Triclocarban has been widely used for over 50 years, but only recently some concerns were raised about its endocrine disruptive properties. In September 2016, the U.S. Food and Drug Administration banned its use in over-the-counter hand and body washes because of its toxicity. The withdrawal of triclocarban has prompted the efforts to search for new antimicrobial compounds and several analogues of triclocarban have also been studied. In this review, an examination of different facets of triclocarban and its analogues will be analyzed.