Supersymmetry and bosonization in three dimensions

We discuss on the possible existence of a supersymmetric invariance in purely fermionic planar systems and its relation to the fermion-boson mapping in three-dimensional quantum field theory. We consider, as a very simple example, the bosonization of free massive fermions and show that, under certain conditions on the masses, this model displays a supersymmetric-like invariance in the low energy regime. We construct the purely fermionic expression for the supercurrent and the non-linear supersymmetry transformation laws. We argue that the supersymmetry is absent in the limit of massless fermions where the bosonized theory is non-local.     

Annealing effects on the magnetization of Co–Ni–B amorphous nanoparticles

Chemically prepared (Co_xNi_1−x)_1−yB_y (x=0.5, 0.75, 1; y≈0.4) amorphous fine particles were characterized by X-ray diffraction, DTA and TGA, and in situ magnetic measurement as a function of annealing temperature in an inert atmosphere. Magnetic measurement performed in as-prepared and 150°C annealed samples shows an increase of the saturation magnetization and magnetic moment after thermal treatment. Room temperature magnetization increases by factors of 3.5, 1.8, and 1.5, for x=0.5, 0.75, and 1, respectively. These measurements may indicate a local re-ordering of the amorphous phase at temperatures much lower than the full crystallization temperature.     

Infrared and Raman spectroscopic investigation of Eu3+-doped mono and Di-urethanesil hybrid siliceous materials

The general features of two series of sol-gel derived materials, designatedurethanesils (Ut), have been investigated by infrared and Raman spectroscopies with the goal of elucidating the chemical environment of the Eu³⁺ cations. The host frameworks of the two families of ormolytes studied have been represented by m-Ut(350) and d-Ut(300), where m stands for mono, d stands for di, 350 and 300 are the average molecular weights of the organic precursors (poly(ethylene glycol) methyl ether, PEGME, and poly(ethylene glycol), PEG, respectively). The hybrid matrix of the mono-xerogels is composed by a siliceous backbone bonded by means of urethane linkages (-NHC (=O)O-) to pendant methyl end capped oligopolymer chains with approximately 7 oxyethylene units, whereas that of the di-xerogels is based on a siliceous network grafted through urethane groups to both ends of poly(oxyethylene) segments containing about 6 (OCH₂CH₂) repeat units. Both classes of materials have been doped with europium triflate (Eu(CF₃SO₃)₃). The doped samples have been identified by m-Ut(350)_nEu(CF₃SO₃)₃ and d-Ut(300)_nEu(CF₃SO₃), where n is the molar ratio of (OCH₂CH₂) repeat units per Eu³⁺ ion. Materials with n ranging from ∞ to 5 have been analyzed. The spectral data obtained provide evidence that the cations begin to coordinate to the ether oxygen atoms of the oligopolymer chains at n=40 in the mono-urethanesils and at n=10 in the di-urethanesils. In mono-urethanesils samples with n>40 and in di-urethanesils materials with n>10, the Eu³⁺ coordinate exclusively to the carbonyl oxygen atoms of the urethane linkages. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

Paraxial designing of planar waveguide variable-index focusing elements: Part 2—lenses of elliptical symmetry

A paraxial ray-optics formalism proposed for designing radially symmetric variable-index lenses is extended to the case of lenses of elliptical symmetry of the index profile.     

Effect of the environment on the stability of surfactant–polypeptide self‐assembled complexes: Molecular dynamics simulations of stoichiometric complexes formed by N‐dodecyltrimethylammonium and poly(α,L‐glutamate) in chloroform,methanol, and water

A series of molecular dynamics simulations have been performed to study the supramolecular structure of self‐assembled complexes formed by N‐dodecyltrimethylammonium cations and the synthetic polypeptide poly(α,L ‐glutamate). The influence of the type of solvent has been investigated, considering explicit environments of chloroform, water, and methanol on a stoichiometric complex containing 15 residues. In chloroform, the complex stabilizes in a regular structure: the polypeptide adopts an α‐helix conformation that is regularly surrounded by surfactant molecules to form electrostatic interactions through a multiple interaction pattern. However, this structure destabilizes in methanol and water: (a) the α‐helix unfolds in the two solvents and (b) the electrostatic links between the surfactant molecules and the polyanion are disrupted in aqueous solution, although these interactions are still preserved in methanol. The role of the solvent environment in stabilizing or destabilizing the polypeptide secondary structure, the organization of the surfactant molecules, and predominantly the surfactant–polypeptide supramolecular organization is discussed in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1122–1133, 2006     

Surface characterization of recycled tire rubber to be used in cement paste matrix

The surface modification of tire rubber after treatment with saturated NaOH aqueous solution was investigated by HATR infrared analysis, potentiometric titration, and contact angle measurements. Infrared analysis of the powdered treated rubber showed a decrease in absorption at 1540, 1450, and 1395 cm(-1). This decrease is attributed to the removal of zinc stearate, an additive present in tire formulations that often migrates and diffuses to the surface, resulting in poor adhesion between the rubber and other materials. The potentiometric titration of the suspension of powdered rubber in 0.1 M NaCl showed that more hydrochloric acid was consumed by the untreated rubber, most likely a result of the hyrdrolysis of the zinc stearate to the organic acid. Contact angles of flat tire pieces showed an homogeneity enhancement of the treated rubber surface. The decrease of the zinc stearate on the treated rubber surface explains the improvement in the adhesion of this material to the cement matrix, observed in a previous research. The promising results of this study are a starting point for future research on incorporating rubber particles into cementitious materials as a means of successfully utilizing the vast amounts of tire waste currently in landfills.     

Development and critical comparison of greener flow procedures for nitrite determination in natural waters

Two greener procedures for flow-injection spectrophotometric determination of nitrite in natural waters were developed and critically compared. Replacement of toxic reagents, waste minimization and treatment were exploited to attend the standards of clean chemistry. The flow system was designed with solenoid micro-pumps in order to minimize reagent consumption and waste generation. The first procedure is based on the Griess diazo-coupling reaction with sulfanilamide and N-(1-naphthyl)ethylenediamine (NED) yielding an azo dye, followed by photodegradation of the low amount of waste generated based on the photo-Fenton reaction. The second procedure is based on the formation of iodine from nitrite and iodide in acid medium in order to avoid the use of toxic reagents. For Griess method, linear response was achieved up to 1.0 mg L^− 1, described by the equation A = − 0.007 + 0.460C (mg L^− 1), r = 0.999. The detection limit was estimated as 8 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.8% (n = 20). The sampling rate was estimated as 108 determinations per hour. The consumption of the most toxic reagent (NED) is reduced 55-fold and 20-fold in comparison to batch method and flow injection with continuous reagent addition, respectively. A colorless residue was obtained by in-line photodegradation with reduction of 87% of the total organic carbon content. The results obtained for natural water samples were in agreement with those achieved by the reference method at the 95% confidence level. For the nitrite–iodide method, linear response was observed up to 2.0 mg L^− 1, described by the equation A = − 0.024 + 0.148C (mg L^− 1), r = 0.999. The detection limit was estimated as 25 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.6% (n = 20). The sampling rate was estimated as 44 determinations per hour. Despite avoiding the use of toxic reagents, the nitrite–iodide method presented worst performance in terms of selectivity and sensitivity.     

Tuning the Properties of Copper(II) Complexes with Tetra‐ and Pentadentate Bispidine (=3,7‐Diazabicyclo[3.3.1]nonane) Ligands

The synthesis of a series of tetra‐ and pentadentate bispidine‐type ligands (bispidine=3,7‐diazabicyclo[3.3.1]nonane) – tetradentate ligands are donor‐substituted at C(2) and C(4), pentadentate ligands have an additional donor at N(3) or N(7), with pyridine, 2‐methylpyridine, or quinoline donor moieties – and of their Cu^II complexes are reported, together with single‐crystal structural analyses and solution studies (electrochemistry, electronic and EPR spectroscopy). Depending on the ligand geometry and on the co‐ligands (solvent or counter anion), there are various structural forms (pseudo‐Jahn–Teller elongation along all three molecular axes), and the structural data are correlated with the spectroscopic and electrochemical parameters.     

Vanadyl salen complexes covalently anchored to an imidazolium ion as catalysts for the cyanosilylation of aldehydes in ionic liquids

Two vanadyl salen complexes having peripheral styryl substituents have been reacted with 1-methyl-3-(3-mercaptopropyl)-imidazolium chloride using azoisobutyronitrile as radical initiator. The resulting compounds contain at the same time a vanadyl salen complex and one imidazolium cation. In agreement with the expectations in view of their structure, these compounds were insoluble in conventional organic solvents, but completely miscible in imidazolium ionic liquids. These vanadyl salen complexes bonded to an imidazolium cation are highly active and reusable catalysts for the cyanosilylation of aldehydes. Moderate enantiomeric excesses were obtained using the chiral version of this complex.