Synthesis of pyrrolidine-substituted benzamides via iodocyclization of β-enaminoesters

Novel 2-, and N-substituted 5-methylene-pyrrolidine benzamides and 2-, 3-, and N-substituted 5-methylene-2-pyrroline benzamides were synthesized for the first time in a straightforward manner and in good yields via iodocyclization of γ- and α-alkenyl-β-enaminoesters, respectively. The key step in the process is the synthesis of the methylene-pyrrolidine iodide and methylene-2-pyrroline iodide intermediates. Functional group inter-conversion of these iodides to their amino analogs, and their subsequent coupling to benzoic acids via EDC, afforded the above pyrrolidine/2-pyrroline-substituted benzamides in yields of around 75%.     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Preparation of clarithromycin. Selective 6-O-methylation of the novel erythromycin A 9-O-(2-pyrimidyl)oxime

A new method for the preparation of clarithromycin is described through the highly regioselective O-methylation at C(6)-OH of the novel derivative 9-pyrimidyloxime erythromycin A. The facile synthesis of 6,11-O-dimethyl- and 6,11,12-O-trimethyl erythromycin A is also reported. These compounds are useful as standards to assess clarithromycin purity in quality control processes.     

Hybrid Molecular Materials Based upon Organic π-Electron Donors and Inorganic Metal Complexes. Conducting Salts of Bis(ethylenediseleno)tetrathiafulvalene (BEST) with the Octahedral Anions Hexacyanoferrate(III) and Nitroprusside

The synthesis, structure and physical characterization of three new radical salts formed by the organic donor bis(ethylenediseleno)tetrathiafulvalene (BEDS-TTF or BEST) and the paramagnetic hexacyanoferrate(III) anion [Fe(CN)₆]³⁻ or the photochromic nitroprusside anion [Fe(CN)₅NO]²⁻ are reported: (BEST)₄[Fe(CN)₆] (1), (BEST)₃[Fe(CN)₆]₂·H₂O (2) and (BEST)₂[Fe(CN)₅NO] (3). Salts 1 and 3 show a layered structure with alternating organic (β-type packing) and inorganic slabs. Salt 2 shows an original interpenetrated structure probably due to the unprecedented presence of (BEST)²⁺ dications. The three salts are semiconductors although salt 1 exhibits a high room temperature conductivity and a semiconducting-semiconducting transition at ca. 150 K which has been attributed to a dimerization in the organic sublattice.     

Searching for precursors to metal-metal bonded dipalladium species: a study of Pd2(4+) complexes

Reactions of Pd3(OAc)6 with lithium salts of mononegative bidentate N,N-ligands, L, of various types, such as formamidinates, benzamidinates, triazinates, and guanidinates, were investigated in a search for ways to obtain Pd2(4+) compounds that could serve as precursors to paddlewheel complexes with a metal-metal bond and a Pd2(5+) core. It was found that the reactions are complex and that either square planar mononuclear or dinuclear species may be formed depending on the reaction conditions or the method of isolation. For Pd2L4 compounds, alpha and beta isomers were sometimes obtainable. In the alpha isomer, all N,N-ligands serve as bridges, whereas in the beta isomer, two ligands bridge the Pd2(4+) unit and each of the other two chelate to a metal atom. Electrochemistry shows that the paddlewheel compounds Pd2(TolNC(H)NTol)4, Pd2(PhNC(Ph)NPh)4, and Pd2(PhNC(Ph)NPh)3(OAc) and the orthometalated complex cis-Pd2[eta2-C6H4NC(Ph)N(H)Ph]2(mu-OAc)2 have reversible oxidation waves between 0.70 and 0.92 V vs Ag/AgCl, which makes them good candidates for chemical oxidation.     

Design strategies for controlling the molecular weight and rate using reversible addition–fragmentation chain transfer mediated living radical polymerization

Living radical polymerization has allowed complex polymer architectures to be synthesized in bulk, solution, and water. The most versatile of these techniques is reversible addition–fragmentation chain transfer (RAFT), which allows a wide range of functional and nonfunctional polymers to be made with predictable molecular weight distributions (MWDs), ranging from very narrow to quite broad. The great complexity of the RAFT mechanism and how the kinetic parameters affect the rate of polymerization and MWD are not obvious. Therefore, the aim of this article is to provide useful insights into the important kinetic parameters that control the rate of polymerization and the evolution of the MWD with conversion. We discuss how a change in the chain‐transfer constant can affect the evolution of the MWD. It is shown how we can, in principle, use only one RAFT agent to obtain a polymer with any MWD. Retardation and inhibition are discussed in terms of (1) the leaving R group reactivity and (2) the intermediate radical termination model versus the slow fragmentation model. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3189–3204, 2005     

Regioselectivity in acylation of oligosaccharides catalyzed by the metalloprotease thermolysin

Investigation of the acylation scope of carbohydrates by metalloprotease thermolysin immobilized on Celite as biocatalyst has been carried out. The reactions were performed in DMSO, a good solvent for carbohydrates, where the enzyme has previously shown its activity in transesterifications of sucrose, maltose and maltose-containing oligosaccharides. Surprisingly, no reaction was observed for glucose or the glucose-containing disaccharides, trehalose and lactose. In contrast, laurate monoesters of several sucrose-containing tri- and tetrasaccharides were synthetized through a one step transesterification using vinyl laurate as the acylating agent. Enzyme regioselectivity was accurately determined by HPLC/MS and the structure of the main regioisomers was established by a combination of NMR experiments. The preferred position of acylation in all cases was the 2-OH of the α-d-glucopyranose moiety linked 1→2 to the β-d-fructofuranose unit. These results correlate with the regioselectivity observed in the case of the disaccharide sucrose. A general carbohydrate binding motif for catalysis by thermolysin is proposed.     

Synthesis of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b][1,4]-diazepin-6-ones from 4,5-diamino-1H-pyrimidin-6-ones and 1-aryl-3-(dimethylamino)-1-propanones

The reaction of 1-aryl-3-(dimethylamino)-1-propanones 1 with one equivalent of 4,5-diamino-1H-pyrimidin-6-ones 2 , in acidic medium, leads to the formation of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b]-[1,4]diazepin-6-ones 3 . The structure elucidation of the products is based on detail nmr analysis of experiments such as ¹³C, ¹H and DEPT including selective ¹³C{¹H} decoupling experiments.     

Molecular nitrides containing group 4 and 5 metals: single and double azatitanocubanes

Treatment of [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) with the imido complexes [Ti(NAr)Cl(2)(py)(3)] (Ar=2,4,6-C(6)H(2)Me(3)) and [Ti(NtBu)Cl(2)(py)(3)] in toluene affords the single azatitanocubanes [[Cl(2)(ArN)Ti]( micro(3)-NH)(3)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (2.C(7)H(8)) and [[Cl(2)Ti](micro(3)-N)(2)(micro(3)-NH)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (3), respectively. Similar reactions of complex 1 with the niobium and tantalum imido derivatives [[M(NtBu)(NHtBu)Cl(2)(NH(2)tBu)](2)] (M=Nb, Ta) in toluene give the single azaheterometallocubanes [[Cl(2)(tBuN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (M=Nb (4), Ta (5)), both complexes react with 2,4,6-trimethylaniline to yield the analogous species [[Cl(2)(ArN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (Ar=2,4,6-C(6)H(2)Me(3), M=Nb (6.C(7)H(8)), Ta (7.C(7)H(8))). Also the azaheterodicubanes [M[micro(3)-N)(2)(micro(3)-NH)](2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2C(7)H(8) [M=Ti (8.2C(7)H(8)), Zr (9.2C(7)H(8))], and [M[(micro(3)-N)(5)(micro(3)-NH)][Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2 C(7)H(8) (Nb (10.2C(7)H(8)), Ta (11.2C(7)H(8))) were prepared from 1 and the homoleptic dimethylamido complex [M(NMe(2))(x)] (x=4, M=Ti, Zr; x=5, M=Nb, Ta) in toluene at 150 degrees C. X-ray crystal structure determinations were performed for 6 and 10, which revealed a cube- and double-cube-type core, respectively. For complexes 2 and 4-7 we observed and studied by DNMR a rotation or trigonal-twist of the organometallic ligands [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) and [(micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]](1-). Density functional theory calculations were carried out on model complexes of 2, 3, and 8 to establish and understand their structures.     

Paired electrosynthesis of cyanoacetic acid

Cyanoacetic acid is formed by cathodic reduction of CO(2) and anodic oxidation of the tetraalkylammonium salt anion; the process is conduced in acetonitrile using a divided cell with a medium porosity glass-frit diaphragm. A mechanism for this paired electrochemical reaction is proposed.