A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.     

Lead(II) thiocyanate complexes with bibracchial lariat ethers: an X-ray and DFT study

Compounds of formula [Pb(L2)(NCS)2] (1) and [Pb(L4)(SCN)2] (2) (where L2 is the lariat crown ether N,N'-bis(3-aminobenzyl)-4,13-diaza-18-crown-6 and L4 is the Schiff-base lariat crown ether N,N'-bis(3-(salicylaldimino)benzyl)-4,13-diaza-18-crown-6) were isolated and structurally characterized by X-ray diffraction analyses. The X-ray crystal structures of both compounds show the metal ion coordinated to the six donor atoms of the crown moiety, leaving the corresponding pendant arms uncoordinated. The coordination sphere of lead(II) is completed by two thiocyanate groups that coordinate either through their nitrogen (1) or sulfur (2) atoms. The organic receptor adopts a syn conformation in 1, while in 2 it shows an anti conformation. To rationalize these unexpected different conformations of the L2 and L4 receptors in compounds 1 and 2, as well as the different binding modes found for the thiocyanate ligands, we have carried out theoretical calculations at the DFT (B3LYP) level. These calculations predict the syn conformation being the most stable in both 1 and 2 complexes. So, the anti conformation found for 2 in the solid state is tentatively attributed to the presence of intermolecular pi-pi interactions between phenol rings, for which the dihedral angle between the least-squares planes of both rings amounts to 2.6 degrees and the distance between the center of both rings is 3.766 A. On the other hand, the analysis of the electronic structure has revealed that the Pb-ligand bonds present highly ionic character in this family of compounds. They also suggest a greater transfer of electron density from the NCS- ligands when they coordinate through the less electronegative S atom. The Pb-SCN covalent bond formation mainly occurs due to an effective overlap of the occupied 3p z orbitals of the S atoms and the unoccupied 6p z AO of the Pb atom, while the Pb-NCS bonding interaction is primarily due to the overlap of the 6s and 7s AO of Pb with sp(1.10) hybrids of the N donor atoms. Our electronic structure calculations can rationalize the different coordination of the thiocyanate groups in compounds 1 and 2: the simultaneous formation of two Pb-SCN bonds is more favorable for S-Pb-S angles close to 180 degrees , for which the overlap between the occupied 3p z orbitals of the S atoms and the unoccupied 6 pz AO of the Pb atom is maximized.     

Spectroelectrochemical characterisation of poly[Ni(saltMe)]-modified electrodes

Electrogenerated polymers based on the nickel(II) complex 2,3-dimethyl-N,N'-bis(salicylidene)butane-2,3-diaminatonickel(II), poly[Ni(saltMe)], were characterised by in situ FTIR and UV/Vis spectroscopy and ex-situ EPR spectroscopy in order to gain insights into film structure, electronic states and charge conduction. The role of the nickel ions during film oxidation was probed by using EPR to study naturally abundant Ni and 61Ni-enriched polymers. The data from all the spectroscopic techniques are consistent, and clearly indicate that polymerisation and redox switching are associated with oxidative ligand based processes; coulometry suggests that one positive charge was delocalised through each monomer unit. EPR provided evidence for the non-direct involvement of the metal in polymer oxidation: the polymer is best described as a polyphenylene-type compound (conducting polymer), rather than an aggregation of nickel complexes (redox polymer), and the main charge carriers are identified as polarons. An explanation for the high electrochemical stability and conductivity of poly[Ni(saltMe)] with respect to that of poly[Ni(salen)] is proposed. based on stereochemical repulsion between monomeric units; this can impose a less compact supramolecular structure on polymers with bulkier substituents.     

Dramatic changes in geometry after ionization: experimental and theoretical studies on the electronic properties of fluorocarbonyl (mono-, di-, and tri-) sulfur compounds

In this work, we present a complete study on He I photoelectron spectroscopy (PES) for the fluorocarbonyl mono-, di-, and trisulfur compounds FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F. After optimizations of the structure for stable conformers at different levels of theory, a complete theoretical study involving the calculation of the ionization energies using orbital valence Green's functional (OVGF) was performed. Calculations of radical-cationic forms were carried out in order to compare their properties with those of the neutral molecules. The first IP values are 10.7, 9.0, and 10.5 eV for FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F, respectively. The groups bonded to the S atom mainly influence the ionizations originating from the sulfur lone pairs. A wide electronic delocalization in the FC(O)S moiety can be deduced from experimental and theoretical results, which leads to a strong energetic stabilization of the n' '(S) (sulfur lone pair pi orbital). Other conclusions relate to effects on the substituents attached to the S atom and the importance of the molecular planarity in the orbital stabilization of the FC(O)S moiety for the neutral molecules. It is worthwhile mentioning that FC(O)SCl retains its planar structure after ionization, but drastic changes occur in the geometry of both FC(O)SSCH(3) and FC(O)SSSC(O)F. The FC(O)SSCH(3) molecule adopts a heavy atom planar structure after ionization. The FC(O)SSS moiety becomes a planar form after the ionization of the FC(O)SSSC(O)F molecule, whereas the second C(O)F group maintains its original conformation with respect to the SSS group.     

A method to calculate density distribution of adsorption centers from temperature-programmed desorption spectra

A new method to calculate the function of density distribution of adsorption centers according to the activation energies of desorption by using temperature-programmed desorption curves is suggested. The application of this method is exemplified by toluene desorption from ZSM-5 zeolite.

---

, . .

     

Total synthesis of LFA-1 antagonist BIRT-377 via organocatalytic asymmetric construction of a quaternary stereocenter

A catalytic route for enantioselective total synthesis of cell adhesion inhibitor BIRT-377 is described. The quaternary stereocenter was constructed through l-proline-derived, tetrazole-catalyzed direct asymmetric alpha-amination of 3-(4-bromophenyl)-2-methylpropanal with dibenzyl azodicarboxylate. In the course of these studies, a one-pot trifluoro acetylation/selective benzyloxycarbonyl deprotection method was developed. [structure: see text]     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Kinetics and mechanism of the phenolysis of asymmetric diaryl carbonates

The reactions 4-methylphenyl 4-nitrophenyl carbonate (MPNPC), 4-chlorophenyl 4-nitrophenyl carbonate (CIPNPC), 4-methylphenyl 2,4-dinitrophenyl carbonate (MPDNPC), and 4-chlorophenyl 2,4-dinitrophenyl carbonate (CIPDNPC) with a homogeneous series of phenoxide anions are subjected to a kinetic investigation in aqueous solution (25.0 degrees C, ionic strength 0.2 M (KCI)). Under an excess of phenoxide with respect to the substrate, all of these reactions obey pseudo-first-order kinetics and are first order in phenoxide. The Br?nsted-type plots for the nucleophilic rate constants (k(N)) are linear, with slopes beta = 0.48 (MPNPC), 0.67 (ClPNPC), 0.41 (MPDNPC), and 0.32 (ClPDNPC). The magnitude of these slopes and the absence of a curvature in the Br?nsted plot at pK(a) = 7.1 for the CIPNPC reactions are consistent with concerted mechanisms (one step). The carbonates MPDNPC and ClPDNPC are more reactive than MPNPC and CIPNPC, respectively, toward phenoxide nucleophiles. This can be explained by the presence of a second nitro group in the nucleofuge of the dinitro derivatives, which (i) leaves their carbonyl carbon more positively charged, making them better electrophiles, and (ii) makes 2,4-dinitrophenoxide a better leaving group than 4-nitrophenoxide. The 4-chloro derivatives are more reactive than the corresponding 4-methyl derivatives. This should be due to the greater electron withdrawal of 4-chloro than 4-methyl, which makes the former carbonyl more electrophilic. Comparison of the concerted phenolysis of MPNPC with the stepwise reactions of secondary alicyclic amines with the same substrate indicates that substitution of a secondary alicyclic amine group in a zwitterionic tetrahedral intermediate by a phenoxy group greatly destabilizes the intermediate. An equation is deduced for log k(N) in terms of the basicity of the nucleophile, the nonleaving moiety, and the leaving group. This equation shows that for these reactions, the sensitivity of log k(N) to the basicity of the nonleaving moiety (beta(nlg) = -0.27) is very similar to that of the nucleofuge (beta(lg) = -0.25).     

Clean osmium-catalyzed asymmetric dihydroxylation of olefins in ionic liquids and supercritical CO2 product recovery

The combination of ionic liquids (ILs) as solvents in the asymmetric Sharpless dihydroxylation (AD) with the use of scCO(2) in the separation process allows a very simple, efficient, clean and robust system for the reuse of the AD catalytic system, which also does not need the use of organic solvents either for the reaction or for the separation of products and allows the isolation of the diol, in high yield and enantiomeric excess and basically without contamination with osmium.     

Antimony(III) Oxide Film on a Cellulose Fiber Surface: Preparation and Characterization of the Composite

Cellulose/antimony(III) oxide composites, Cel/Sb(2)O(3), with oxide loadings of 1.7, 5.4, and 9.2 wt% were prepared by reacting the precursor SbCl(3) reagent with cellulose in dry ethanol solution. The reaction of the Lewis acid and the cellulose fibers occurred at the~amorphous domains of the biopolymer, increasing the crystallinity degree of the composite compared with that of the untreated cellulose. The scanning electron microscopy images and metal mapping for all samples showed that the oxide film layer uniformly covered the fiber surfaces with no detectable agglomerates of the oxide particles. The synchrotron X-ray diffraction patterns indicated that the antimony oxide film was obtained as a crystalline phase with orthorombic structure. The atomic ratios of O/Sb, determined by X-ray photoelectron spectroscopy, indicated that, for Cel/Sb(2)O(3) samples with 9.3 wt% loading, the fiber surface is nearly saturated by the oxide layer. The thermal stability of Cel/Sb(2)O(3) compared to that of untreated cellulose is practically unaffected. Copyright 2000 Academic Press.