Headspace sampling of the volatile fraction of vegetable matrices

The evolution of vapour phase sampling of the volatile fraction of vegetable matrices, or of products directly related to them, over the period 1996-2007 is reviewed. High concentration capacity headspace (HCC-HS) and dynamic headspace (D-HS) techniques, that is headspace sampling approaches where the analytes in the vapour phase are concentrated into a sorbent, an adsorbent or a solvent, are considered. Advantages, disadvantages and applications to the vegetable field of several successful techniques based on these approaches are critically presented, including in-tube sorptive extraction (INCAT, HS-SPDE), headspace sorptive extraction (HSSE), solid-phase aroma concentrate extraction (SPACE), large surface area HCC-HS sampling (MESI, MME, HS-STE), headspace liquid-phase microextraction (HS-LPME) and dynamic headspace samplings (D-HS). The developments necessary to overcome some of the limits of the above approaches and techniques are also discussed in view of their application to new fields.     

Electron transfer and electrocatalytic properties of the immobilized methionine80alanine cytochrome c variant

The M80A variant of yeast iso-1-cytochrome c (cytc), which features a noncoordinating Ala residue in place of the axial heme iron Met ligand, was chemisorbed on a gold electrode coated with 4-mercaptopyridine or carboxyalkanethiol self-assembled monolayers (SAM) and investigated by cyclic voltammetry at varying conditions of temperature, pH, and O2 concentration. The E degrees ' value (standard reduction potential for the heme Fe(III)/Fe(II) couple) of M80A cytc on both SAMs is of approximately -200 mV (vs the standard hydrogen electrode, SHE) at pH 7, which is more than 400 mV lower than that of native cytochrome c in the same conditions. The thermodynamics of Fe(III) to Fe(II) reduction and the kinetics of heterogeneous electron transfer (ET) are dominated by the presence of a hydroxide ion as the sixth axial heme iron ligand above pH 6. On both SAMs, protonation of the bound hydroxide ion is mainly responsible for the changes in these parameters at low pH, since the distances of ET between the heme and the electrode are found to be independent of pH in the range of 5-11. The invariance of the electrochemical features up to pH 11 indicates that no changes in heme iron coordination occur at high pH, at variance with native cytc. Most notably, immobilized M80A cytc is found to act as an efficient biocatalyst for O2 reduction from pH 5 to 11.0. This finding makes M80A cytc a suitable candidate as a constituent of a biocatalytic interface for O2 biosensing and opens the way for the exploitation of engineered cytochrome c in the bio-based detection of chemicals of environmental and clinical interest.     

Integration of electron density and molecular orbital techniques to reveal questionable bonds: the test case of the direct Fe-Fe bond in Fe2(CO)9

The article illustrates the advantages of partitioning the total electron density rho(rb), its Laplacian (inverted Delta)2 rho(rb), and the energy density H(rb) in terms of orbital components. By calculating the contributions of the mathematically constructed molecular orbitals to the measurable electron density, it is possible to quantify the bonding or antibonding character of each MO. This strategy is exploited to review the controversial existence of direct Fe-Fe bonding in the triply bridged Fe2(CO)9 system. Although the bond is predicted by electron counting rules, the interaction between the two pseudo-octahedral metal centers can be repulsive because of their fully occupied t(2g) sets. Moreover, previous atoms in molecules (AIM) studies failed to show a Fe-Fe bond critical point (bcp). The present electron density orbital partitioning (EDOP) analysis shows that one sigma bonding combination of the t(2g) levels is not totally overcome by the corresponding sigma* MO, which is partially delocalized over the bridging carbonyls. This suggests the existence of some, albeit weak, direct Fe-Fe bonding.     

Triplet state excitation of alkali molecules on helium droplets: experiments and theory

In this paper, we discuss the electronic structure of alkali dimer molecules in 3Pig states on the surface of a helium droplet. The perturbation due to the droplet will in general not satisfy rotational symmetry around the internuclear axis of the diatom and thus, in addition to a broadening and blue shift, will cause a splitting of electronic levels that are degenerate in the free molecules. We propose a model based on general symmetry arguments and on a small number of physically reasonable parameters. We demonstrate that such a model accounts for the essential features of laser-induced fluorescence (LIF) and magnetic circular dichroism (MCD) spectra of the (1)3Pig-a3Sigma+ transition of Rb2 and K2. Furthermore the MCD spectra, analyzed according to the approach of Langford and Williamson [J. Phys. Chem. A 1998, 102, 2415], allow a determination of the populations of Zeeman sublevels in the ground state and thus a measurement of the surface temperature of the droplet. The latter agrees with the accepted temperature, 0.37 K, measured in the interior of a droplet.     

Immunoaffinity column cleanup with liquid chromatography for determination of aflatoxin B1 in corn samples: interlaboratory study

An interlaboratory study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 levels in corn samples, enforced by European Union legislation. A test portion was extracted with methanol-water (80 + 20); the extract was filtered, diluted with phosphate-buffered saline solution, filtered on a microfiber glass filter, and applied to an immunoaffinity column. The column was washed with deionized water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase LC with fluorescence detection after either pre- or postcolumn derivatization. Precolumn derivatization was achieved by generating the trifluoroacetic acid derivative, used by 8 laboratories. The postcolumn derivatization was achieved either with pyridinium hydrobromide perbromide, used by 16 laboratories, or with an electrochemical cell by the addition of bromide to the mobile phase, used by 5 laboratories. The derivatization techniques used were not significantly different when compared by the Student's t-test; the method was statistically evaluated for all the laboratories. Five corn sample materials, both spiked and naturally contaminated, were sent to 29 laboratories (22 Italian and 7 European). Test portions were spiked with aflatoxin B1 at levels of 2.00 and 5.00 ng/g. The mean values for recovery were 82% for the low level and 84% for the high contamination level. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the values for relative standard deviation for repeatability (RSDr) ranged from 9.9 to 28.7%. The values for relative standard deviation for reproducibility (RSDR) ranged from 18.6 to 36.8%. The method demonstrated acceptable within- and between-laboratory precision for this matrix, as evidenced by the HorRat values.     

The inconsistency in adsorption properties and powder XRD data of MOF-5 is rationalized by framework interpenetration and the presence of organic and inorganic species in the nanocavities

MOF-5 is the archetype metal-organic framework and has been subjected to numerous studies the past few years. The focal point of this report is the pitfalls related to the MOF-5 phase identification based on powder XRD data. A broad set of conditions and procedures have been reported for MOF-5 synthesis. These variations have led to materials with substantially different adsorption properties (specific surface areas in the range 700 to 3400 m(2)/g). The relatively low weight loss observed for some as synthesized samples upon solvent removal is also indicative of a low pore volume. Regrettably, these materials have all been described as MOF-5 without any further comments. Furthermore, the reported powder XRD patterns hint at structural differences: The variations in surface area are accompanied by peak splitting phenomena and rather pronounced changes in the relative peak intensities in the powder XRD patterns. In this work, we use single-crystal XRD to investigate structural differences between low and high surface area MOF-5. The low surface area MOF-5 sample had two different classes of crystals. For the dominant phase, Zn(OH)2 species partly occupied the cavities. The presence of Zn species makes the hosting cavity and possibly also adjacent cavities inaccessible and thus efficiently reduces the pore volume of the material. Furthermore, the minor phase consisted of doubly interpenetrated MOF-5 networks, which lowers the adsorption capacity. The presence of Zn species and lattice interpenetration changes the symmetry from cubic to trigonal and explains the peak splitting observed in the powder XRD patterns. Pore-filling effects from the Zn species (and partly the solvent molecules) are also responsible for the pronounced variations in powder XRD peak intensities. This latter conclusion is particularly useful for predicting the adsorption properties of a MOF-5-type material from powder XRD.     

Rejuvenating old computerized spectrometric instrumentation: discussion of two case histories

Computerized analytical instruments of late 70's and 80's are facing rapid technological obsolescence, although they are often retaining good analytical performances. Responsibility is to be attributed to the fast advance in computer technology, which is leaving little or no back-compatibility with old standards and data formats. Rejuvenation may be reached by simple hardware and software modifications, to allow data exchange with modern PC's and LIMS. Two typical case histories for spectrometric instrumentation of late 70's are then presented and discussed in a general fashion.     

High-density lipoproteins contribute to the alpha-1-globulin zone in capillary electrophoresis of human serum proteins

Alpha-1-antitrypsin (AAT) and alpha-1-acid glycoprotein (AAG) are reported to be the main proteins contributing to the alpha-1-globulin capillary zone electrophoresis (CZE) zone, but the sum (AAT + AAG) showed lower than the alpha-1-globulin. We investigated the role of high-density lipoprotein (HDL), an additional protein migrating in the alpha-1-globulin zone, as a possible cause for such a gap. In a set of 98 sera we measured the alpha-1-globulin with a dedicated clinical capillary electrophoresis system, and AAT, AAG and apolipoprotein A-1 (ApoA) by immunonephelometry. The alpha-1-globulin were consistently higher than the sum (AAT + AAG), by (mean value +/- standard deviation) 1.70 +/- 0.88 g/L in 49 sera with low ApoA, and by 3.59 +/- 0.75 g/L in 49 sera with high ApoA. Corresponding figures in the comparison alpha-1-globulin/(AAT + AAG + ApoA) were reduced to 1.08 +/- 0.77 g/L and 1.67 +/- 0.70 g/L. It is concluded that HDL significantly contribute to the CZE alpha-1-globulin zone, but do not completely explain the differences between the electrophoretic and the immunochemical measurements. However, CZE alpha-1-globulin measurements give information about increases of the two major acute phase proteins comparable to specific protein measurements.     

Dipyridylketone as a versatile ligand precursor for new cationic heteroleptic cyclometalated iridium complexes

Three new bis-cyclometalated iridium(III) complexes, of general formula [Ir(2-phenylpyridine)(2)(L)](+), are reported. The compounds contain a dipyridine-type ligand (L) derived from di-2-pyridylketone (dipyridin-2-ylmethanol, 2,2'-(hydrazonomethylene)dipyridine and 3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile) and were synthesized through two different reaction pathways. The alternative synthetic pathway herein proposed, namely the direct reactions on the complex [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+), overcame the inconveniences encountered with the standard reaction between the dimeric precursor [Ir(2-phenylpyridine)(2)(μ-Cl)](2) and the ancillary ligands (L). The photophysical characterization of the iridium complexes reveals that modifications on the ancillary ligand introduce large changes in the photophysical behaviour of the complexes. High emission quantum yield is associated with the presence of a saturated carbon between the two pyridyl moieties: [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+) and [Ir(2-phenylpyridine)(2)(2,2'-(hydrazonomethylene)dipyridine)](+) are extremely low emissive, while [Ir(2-phenylpyridine)(2)(dipyridin-2-ylmethanol)](+) and [Ir(2-phenylpyridine)(2)(3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile)](+) are good photoemitters. DFT and TD-DFT calculations confirmed the mixed LC/MLCT character of the excited states involved in the absorption and emission processes and highlighted the role of the π-conjugation between the two subunits of the ancillary ligand in determining the nature of the LUMO.     

First hyperpolarizability of polymethineimine with long-range corrected functionals

Using the long-range corrected (LC) density functional theory (DFT) scheme introduced by Iikura et al. [J. Chem. Phys. 115, 3540 (2001)] and the Coulomb-attenuating model (CAM-B3LYP) of Yanai et al. [Chem. Phys. Lett. 393, 51 (2004)], we have calculated the longitudinal dipole moments and static electronic first hyperpolarizabilities of increasingly long polymehtineimine oligomers. For comparison purposes Hartree-Fock (HF), Moller-Plesset perturbation theory (MP2), and conventional pure and hybrid functionals have been considered as well. HF, generalized gradient approximation (GGA), and conventional hybrids provide too large dipole moments for long oligomers, while LC-DFT allows to reduce the discrepancy with respect to MP2 by a factor of 3. For the first hyperpolarizability, the incorrect evolution with the chain length predicted by HF is strongly worsened by BLYP, Perdew-Burke-Ernzerhof (PBE), and also by B3LYP and PBE0. On the reverse, LC-BLYP and LC-PBE hyperpolarizabilities are correctly predicted to be positive (but for the two smallest chains). Indeed, for medium and long oligomers LC hyperpolarizabilities are slightly smaller than MP2 hyperpolarizabilities, as it should be. CAM-B3LYP also strongly improves the B3LYP results, though a bit less impressively for small chain lengths. The present study demonstrates the efficiency of long-range DFT, even in very pathological cases.