Analysis of nitrosamines in water by automated SPE and isotope dilution GC/HRMS Occurrence in the different steps of a drinking water treatment plant, and in chlorinated samples from a reservoir and a sewage treatment plant effluent

A method based on automated solid-phase extraction (SPE) and isotope dilution gas chromatography/high resolution mass spectrometry (GC/HRMS) has been developed for the analysis of nine nitrosamines in water samples. The combination of automated SPE and GC/HRMS for the analysis of nitrosamines has not been reported previously. The method shows as advantages the selectivity and sensitivity of GC/HRMS analysis and the high efficiency of automated SPE with coconut charcoal EPA 521 cartridges. Low method detection limits (MDLs) were achieved, along with a greater facility of the procedure and less dependance on the operator with regard to the methods based on manual SPE. Quality requirements for isotope dilution-based methods were accomplished for most analysed nitrosamines, regarding to trueness (80–120%), method precision (<15%) and MDLs (0.08–1.7 ng/L).Nineteen water samples (16 samples from a drinking water treatment plant {DWTP}, 2 chlorinated samples from a sewage treatment plant {STP} effluent, and 1 chlorinated sample from a reservoir) were analysed. Concentrations of nitrosamines in the STP effluent were 309.4 and 730.2 ng/L, being higher when higher doses of chlorine were applied. N-Nitrosodimethylamine (NDMA) and N-nitrosodiethylamine (NDEA) were the main compounds identified in the STP effluent, and NDEA was detected above 200 ng/L, regulatory level for NDMA in effluents stated in Ontario (Canada). Lower concentrations of nitrosamines were found in the reservoir (20.3 ng/L) and in the DWTP samples (n.d. −28.6 ng/L). NDMA and NDEA were respectively found in the reservoir and in treated and highly chlorinated DWTP samples at concentrations above 10 ng/L (guide value established in different countries). The highest concentrations of nitrosamines were found after chlorination and ozonation processes (ozonated, treated and highly chlorinated water) in DWTP samples.     

1,2,4-triazolium-cation-based energetic salts

3,4,5-Triamino-1,2,4-triazole (guanazine, 1) can be readily methylated with methyl iodide yielding methylguanazinium iodide (2). Salts containing the novel methylguanazinium cation with energetic anions were synthesised by metathesis reactions with silver azide (3), silver nitrate (4), silver perchlorate (5), sodium 5,5'-azotetrazolate (6), silver 5-nitrotetrazolate (7) and silver dinitramide (8), yielding a new family of heterocycle-based salts, which were fully characterised by analytical (mass spectrometry and elemental analysis) and spectroscopic methods (IR, Raman and NMR). In addition, the molecular structures of all compounds were confirmed by X-ray analysis, revealing extensive hydrogen-bonding in the solid state and densities between 1.399 (3) and 1.669 g cm(-3) (5). The hydrogen-bonded ring motifs are discussed in the formalism of graph-set analysis for hydrogen-bond patterns and compared to each other. Preliminary sensitivity testing of the crystalline compounds indicate surprisingly low sensitivities to both friction and impact, the highest friction and shock sensitivity being found for the perchlorate (5, 220 N) and the dinitramide (8, 20 J) salts, respectively. In addition, DSC analysis was used to assess the thermal stabilities of the compounds: 3-6 melt above 200 degrees C with concomitant decomposition, whereas 7 and 8 have clearly defined melting points at 162 and 129 degrees C, respectively, and with decomposition occurring about 30 degrees C above the melting point. Lastly all compounds have positive calculated heats of formation between 336 (4) and 4070 kJ kg(-1) (6) and calculated detonation velocities in the range between 8330 (7) and 8922 m s(-1) (6) making them of interest as new highly energetic materials with low sensitivity.     

The synthesis of azadirachtin: a potent insect antifeedant

We describe in full the first synthesis of the potent insect antifeedant azadirachtin through a highly convergent approach. An O-alkylation reaction is used to unite decalin ketone and propargylic mesylate fragments, after which a Claisen rearrangement constructs the central C8-C14 bond in a stereoselective fashion. The allene which results from this sequence then enables a second critical carbon-carbon bond forming event whereby the [3.2.1] bicyclic system, present in the natural product, is generated via a 5-exo-radical cyclisation process. Finally, using knowledge gained through our early studies into the reactivity of the natural product, a series of carefully designed steps completes the synthesis of this challenging molecule.     

Salts of methylated 5-aminotetrazoles with energetic anions

1-methyl-5-aminotetrazole (4, MAT) can easily be protonated by strong acids, yielding known but largely uninvestigated 1-methyl-5-aminotetrazolium nitrate (4a) and perchlorate (4b). Methylation, rather than protonation, of 4 with iodomethane followed by the exchange of the iodide (5a) for nitrate (5b), perchlorate (5c), azide (5d), and dinitramide (5e) yields a new family of energetic methylated aminotetrazole salts. In all cases, stable salts were obtained and fully characterized by vibrational (IR, Raman) spectroscopy, multinuclear NMR spectroscopy, mass spectrometry, elemental analysis, and X-ray structure determination. Compounds 4a, 4b, and 5c crystallize in the monoclinic space group P2(1)/n, whereas compounds 5b and 5e crystallize in the orthorhombic space group P2(1)2(1)2(1) and 5d in the orthorhombic Fddd. Initial safety testing (impact, friction, and electrostatic sensitivity) and thermal stability measurements (DSC) were also carried out. The MAT salts all exhibit good thermal stabilities (decomposition above 150 degrees C). The constant volume energies of combustion (DeltacU) of 4a, 5b, 5d, and 5e were determined to be -2510(10) cal/g, -3190(30) cal/g, -4500(100) cal/g, and -2570(70) cal/g, respectively, experimentally using oxygen bomb calorimetry. From the experimentally determined density, chemical composition and energies of formation (back calculated from the heats of combustion), the detonation pressures and velocities of 4a (8100 m/s, 25.6 GPa), 5b (7500 m/s, 20.2 GPa), 5d (8200 m/s, 21.7 GPa), and 5e (7500 m/s, 21.2 GPa) were predicted using the EXPLO5 code.     

Efficient preparation of N-phenylsulfenyl ketimines from oximes or nitro compounds without racemization of alpha-stereocenters

As N-sulfenyl imines (e.g., RR'C=N-SAr) can be readily transformed to their N-sulfinyl imines (RR'C=N-SOAr), N-sulfonyl imines (RR'C=N-SO2Ar), and N-sulfonyl oxaziridines, the very mild procedure developed to convert ketoximes and secondary nitro derivatives to N-arenesulfenyl ketimines constitutes a new and efficient route to all these series of compounds. The configuration of the alpha-stereocenters is retained.     

Combined theoretical and experimental analysis of the bonding in the heterobimetallic cubane-type Mo(3)NiS(4) and Mo(3)CuS(4) core clusters

X-ray structural data for the cubane-type clusters [Mo3CuS4(dmpe)3Cl4](+) and Mo3NiS4(dmpe)3Cl4 (dmpe = 1,2-bis(dimethylphosphino)ethane) with 16 metal electrons have been compared with optimized structural parameters calculated using "ab initio" methodologies. Compound Mo3NiS4(dmpe)3Cl4 crystallizes in the cubic noncentrosymmetric space group P213 with a Mo-Ni distance of 2.647 Angstrom, that is 0.2 Angstrom shorter than the Mo-Cu bond length in the isoelectronic copper cluster. The best agreement between theory and experiments has been obtained using the B3P86 method. In order to validate the B3P86 results, accurate infrared and Raman spectra have been acquired and the vibrational modes associated to the cubane-type Mo3M'S4 (M' = Cu or Ni) unit have been assigned theoretically. The electronic changes taking place when incorporating the M' into the Mo3S4 unit have been analyzed from a theoretical and experimental perspective. The bond dissociation energies between M'-Cl and Mo3S4 fragments show that formation of [Mo3CuS4(dmpe)3Cl4](+) is 135 kcal/mol energetically less favorable than the Ni incorporation. The more robust nature of the Mo3NiS4 fragment has been confirmed by mass spectrometry. The X-ray photoelectron spectroscopy (XPS) spectra of the trimetallic and tetrametallic complexes have been measured and the obtained binding energies compared with the computed electronic populations based on topological approaches of the electron localization function (ELF). The energies and shapes of the Cu 2p and Ni 2p lines indicate formal oxidation states of Cu(I) and Ni(II). However, the reductive addition of nickel into [Mo3S4(dmpe)3Cl3](+) causes a small decrease in the Mo 3d binding energies. This fact prevents an unambiguous assignment of an oxidation state in a conventional way, a circumstance that has been analyzed through the covariance of the electronic populations associated to the C(M') core and V(Mo3Ni) and V(S(2)') valence basins where Mo3NiS4 is a particularly electronically delocalized chemical entity.     

Electron and ion reactions with hexamethyldisiloxane and pentamethyldisiloxane

The dissociative recombination of electrons with the hexamethyldisiloxane (HMDSO) cation ((CH(3))(3)Si-O-Si(CH(3))(3))(+) and the pentamethyldisiloxane cation ((CH(3))(3)Si-O-Si(CH(2))(2))(+) as well as the ion-molecule reaction between Ar(+) and HMDSO have been studied at 300 K using a flowing afterglow Langmuir probe-mass spectrometer apparatus. The rate constants for these reactions, measured directly for the first time, are, respectively, alpha(1)=1.8 x 10(-6), alpha(2)=3.6 x 10(-6) cm(3)s, and k=2.0 x 10(-9) cm(3)s with uncertainties of +/-30%. In addition, the electronic attachment to neutral HMDSO was also studied and an upper limit value of the rate constant was determined to be beta=3.3 x 10(-11) cm(3)s.     

Methoxycarbonylation of olefins catalyzed by palladium complexes bearing P,N-donor ligands

The methoxycarbonylation of alkenes catalyzed by palladium(II) complexes with P,N-donor ligands, 2-(diphenylphosphinoamino)pyridine (Ph2PNHpy), 2-[(diphenylphosphino)methyl]pyridine (Ph2PCH2py), and 2-(diphenylphosphino)quinoline (Ph2Pqn) has been investigated. The results show that the complex [PdCl(PPh3)(Ph2PNHpy)]Cl or an equimolar mixture of [PdCl2(Ph2PNHpy)] and PPh3, in the presence of p-toluensulfonic acid (TsOH), is an efficient catalyst for this reaction. This catalytic system promotes the conversion of styrene into methyl 2-phenylpropanoate and methyl 3-phenylpropanoate with nearly complete chemoselectivity, 98% regioselectivity in the branched isomer, and high turnover frequency, even at alkene/Pd molar ratios of 1000. Best results were obtained in toluene-MeOH (3 : 1) solvent. The Pd/Ph2PNHpy catalyst is also efficient in the methoxycarbonylation of cyclohexene and 1-hexene, although with lower rates than with styrene. Related palladium complexes [PdCl(PPh3)L]Cl (L = Ph2PCH2py and Ph2Pqn) show lower activity in the methoxycarbonylation of styrene than that of the 2-(diphenylphosphinoamino)pyridine ligand. Replacement of the last ligand by (diphenylphosphino)phenylamine (Ph2PNHPh) or 2-(diphenylphosphinoaminomethyl)pyridine (Ph2PNMepy) also reduces significantly the activity of the catalyst, indicating that both the presence of the pyridine fragment as well as the NH group, are required to achieve a high performing catalyst. Isotopic labeling experiments using MeOD are consistent with a hydride mechanism for the [PdCl(PPh3)(Ph2PNHpy)]Cl catalyst.     

Towards a molecular scale interpretation of excitation energy transfer in solvated bichromophoric systems. II. The through-bond contribution

In this paper we present a quantum-mechanical investigation on the mechanisms which promote intramolecular EET coupling. This investigation is done by using a new computational strategy in which we combine a configuration-interaction and a linear response approach. The combined use of these two methods allows a direct identification and a quantification of both "direct" (coulomb and exchange) and through-bond (superexchange and charge-transfer) contributions. In addition, solvent effects are introduced using the polarizable continuum model. The method is applied to a family of naphthalene-bridge-naphthalene and naphthalene-bridge-anthracene systems, and the results obtained are compared with experiments. The results found suggest that the through-bond charge-transfer effects are not significant when the EET goes through permitted excitations on distant chromophores (see DN4 and DN6) while they become as important as (or even more important than) the covalent terms for EETs involving weakly allowed excitations (see A6N). By contrast, the presence of a very short bridge (in DN2) allows a very efficient delocalization of the excitation energy which is also largely modified by the presence of a solvent.