Stable and Storable N(CF3)2 Transfer Reagents

Fluorinated groups are essential for drug design, agrochemicals, and materials science. The bis(trifluoromethyl)amino group is an example of a stable group that has a high potential. While the number of molecules containing perfluoroalkyl, perfluoroalkoxy, and other fluorinated groups is steadily increasing, examples with the N(CF₃)₂ group are rare. One reason is that transfer reagents are scarce and metal-based storable reagents are unknown. Herein, a set of Cu^I and Ag^I bis(trifluoromethyl)amido complexes stabilized by N- and P-donor ligands with unprecedented stability are presented. The complexes are stable solids that can even be manipulated in air for a short time. They are bis(trifluoromethyl)amination reagents as shown by nucleophilic substitution and Sandmeyer reactions. In addition to a series of benzylbis(trifluoromethyl)amines, 2-bis(trifluoromethyl)amino acetate was obtained, which, upon hydrolysis, gives the fluorinated amino acid N,N-bis(trifluoromethyl)glycine.     

Determination of human muscle protein fractional synthesis rate: an evaluation of different mass spectrometry techniques and considerations for tracer choice

In the present study, different MS methods for the determination of human muscle protein fractional synthesis rate (FSR) using [ring‐¹³C₆]phenylalanine as a tracer were evaluated. Because the turnover rate of human skeletal muscle is slow, only minute quantities of the stable isotopically labeled amino acid will be incorporated within the few hours of a typical laboratory experiment. GC combustion isotope ratio MS (GC‐C‐IRMS) has thus far been considered the ‘gold’ standard for the precise measurements of these low enrichment levels. However, advances in liquid chromatography‐tandem MS (LC‐MS/MS) and GC‐tandem MS (GC‐MS/MS) have made these techniques an option for human muscle FSR measurements. Human muscle biopsies were freeze dried, cleaned, and hydrolyzed, and the amino acids derivatized using either N‐acetyl‐n‐propyl, phenylisothiocyanate, or N‐methyl‐N‐(tert‐butyldimethylsilyl)trifluoroacetamide (MTBSTFA) for GC‐C‐IRMS, LC‐MS/MS, and GC‐MS/MS analysis, respectively. A second derivative, heptafluorobutyric acid (HFBA), was also used for GC‐MS/MS analysis as an alternative for MTBSTFA. The machine reproducibility or the coefficients of variation for delta tracer‐tracee‐ratio measurements (delta tracer‐tracee‐ratio values around 0.0002) were 2.6%, 4.1%, and 10.9% for GC‐C‐IRMS, LC‐MS/MS, and GC‐MS/MS (MTBSTFA), respectively. FSR determined with LC‐MS/MS compared well with GC‐C‐IRMS and so did the GC‐MS/MS when using the HFBA derivative (linear fit Y = 1.08 ± 0.10, X + 0.0049 ± 0.0061, r = 0.89 ± 0.01, P < 0.0001). In conclusion, (1) IRMS still offers the most precise measurement of human muscle FSR, (2) LC‐MS/MS comes quite close and is a good alternative when tissue quantities are too small for GC‐C‐IRMS, and (3) If GC‐MS/MS is to be used, then the HFBA derivative should be used instead of MTBSTFA, which gave unacceptably high variability. Copyright © 2014 John Wiley & Sons, Ltd.     

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.     

Pandemic-Driven Development of a Medical-Grade,Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication

A polyolefin with certified biocompatibility according to USP class VI was used by our group as feedstock for filament-based 3D printing to meet the highest medical standards in order to print personal protective equipment for our university hospital during the ongoing pandemic. Besides the chemical resistance and durability, as well as the ability to withstand steam sterilization, this polypropylene (PP) copolymer is characterized by its high purity, as achieved by highly efficient and selective catalytic polymerization. As the PP copolymer is suited to be printed with all common printers in fused filament fabrication (FFF), it offers an eco-friendly cost–benefit ratio, even for large-scale production. In addition, a digital workflow was established focusing on common desktop FFF printers in the medical sector. It comprises the simulation-based optimization of personalized print objects, considering the inherent material properties such as warping tendency, through to validation of the process chain by 3D scanning, sterilization, and biocompatibility analysis of the printed part. This combination of digital data processing and 3D printing with a sustainable and medically certified material showed great promise in establishing decentralized additive manufacturing in everyday hospital life to meet peaks in demand, supply bottlenecks, and enhanced personalized patient treatment.     

A New Cationic Fluorescent Probe for HSO3− Based on Bisulfite Induced Aggregation Self-Assembly

In comparison with the numerous studies that have centered on developing molecular frameworks for the functionalization of fluorescent materials, less research has addressed the influence of the side chains, despite such appendages contributing significantly to the properties and applications of fluorescent materials. In this work, a new series of cationic fluorescent probes with AIE characteristics have been developed, which exhibit unique sensitivity for charge-diffusion anions, namely HSO₃⁻, via the interactions of ions and the cooperation of the controllable hydrophobicity. The impact of the alkyl chain length attached at the cationic probes suggested that the fluorescent intensity and sensitivity of the probes could be partially enhanced by adjusting their aggregation tendency through the action of the hydrophobic effect under aqueous conditions. DLS and SEM images indicated that different particle sizes and new morphologies of the probes were formed in the anion-recognition-triggered self-assembly process, which could be attributed to the composite effect of electrostatic actions, Van der Waals forces and π-π stacking.     

An Inexpensive Laser Raman Spectrometer Based on CCD Detection

We describe an inexpensive modular Raman spectrometer system that can be assembled from commercial components for under $5000. Three typical applications are presented: a demonstration of a vibrational isotope effect, a Raman polarization experiment, and a resonance Raman experiment. This spectrometer system should make it easier to include the important topic of Raman spectroscopy in the undergraduate physical and analytical chemistry laboratory curricula.     

Azoalkanes—novel flame retardants and their structure–property relationship

A number of symmetrical and unsymmetrical azoalkanes of the general formula R′?N = N?R and related azoxy, hydrazone as well as azine derivatives have been synthesized in order to assess their potential as novel flame retardants for polypropylene alone or in combination with commercially available flame retardants such as alumina trihydrate (ATH), decabromodiphenyl ether (DecaBDE) and tris(3‐bromo‐2,2‐bis(bromomethyl)‐propyl)phosphate (TBBPP). The experimental results show that in the series of different sized azocycloalkanes the flame retardant efficacy decreased in the following order: R = cyclohexyl > cyclopentyl > cyclobutyl > cyclooctanyl >> cyclododecanyl. Whereas in the series of aliphatic azoalkanes compounds the efficacy decreased in the following order: R = n‐alkyl > tert‐butyl > tert‐octyl. In addition, also some of the prepared azoxy, azine, and hydrazone derivatives provide flame retardancy to polypropylene films at already very low concentrations (0.25–1 wt%). Noteworthy is that in contrast to other halogen‐free radical generators, the azoalkanes are also very effective as flame retardants in polypropylene thick moldings. Interestingly, it was found that 4,4′‐bis(cyclohexylazocyclohexyl)‐methane) shows a strong synergistic effect with ATH. Thus, in the presence of 0.5 wt% of azoalkane the ATH loading could be reduced from 60 to 25 wt% and still UL94 V‐2 rating could be reached. Furthermore, the fire testing data reveal that azoalkanes show a synergistic effect with DecaBDE and when used in conjunction with very low loadings of TBBPP. Copyright © 2010 John Wiley & Sons, Ltd.     

Identification and molecular characterization of a novel flavin-free NADPH preferred azoreductase encoded by <Emphasis Type="Italic">azoB</Emphasis> in <Emphasis Type="Italic">Pigmentiphaga kullae</Emphasis> K24

Background  

Microbial degradation of azo dyes is commonly initiated by the reduction of the azo bond(s) by a group of NADH or NADPH dependant azoreductases with many requiring flavin as a cofactor. In this study, we report the identification of a novel flavin-free NADPH preferred azoreductase encoded by azoB in Pigmentiphaga kullae K24.     

Functionalization of Pyrene To Prepare Luminescent Materials—Typical Examples of Synthetic Methodology

Pyrene‐based π‐conjugated materials are considered to be an ideal organic electro‐luminescence material for application in semiconductor devices, such as organic light‐emitting diodes (OLEDs), organic field‐effect transistors (OFETs) and organic photovoltaics (OPVs), and so forth. However, the great drawback of employing pyrene as an organic luminescence material is the formation of excimer emission, which quenches the efficiency at high concentration or in the solid‐state. Thus, in order to obtain highly efficient optical devices, scientists have devoted much effort to tuning the structure of pyrene derivatives in order to realize exploitable properties by employing two strategies, 1) introducing a variety of moieties at the pyrene core, and 2) exploring effective and convenient synthetic strategies to functionalize the pyrene core. Over the past decades, our group has mainly focused on synthetic methodologies for functionalization of the pyrene core; we have found that formylation/acetylation or bromination of pyrene can selectly lead to functionalization at K‐region by Lewis acid catalysis. Herein, this Minireview highlights the direct synthetic approaches (such as formylation, bromination, oxidation, and de‐tert‐butylation reactions, etc.) to functionalize the pyrene in order to advance research on luminescent materials for organic electronic applications. Further, this article demonstrates that the future direction of pyrene chemistry is asymmetric functionalization of pyrene for organic semiconductor applications and highlights some of the classical asymmetric pyrenes, as well as the latest breakthroughs. In addition, the photophysical properties of pyrene‐based molecules are briefly reviewed. To give a current overview of the development of pyrene chemistry, the review selectively covers some of the latest reports and concepts from the period covering late 2011 to the present day.     

Numbers,scale and symbols: the public understanding of nanotechnology

Nanotechnology will be an increasing part of the everyday lives of most people in the world. There is a general recognition that few people understand the implications of the technology, the technology itself or even the definition of the word. This lack of understanding stems from a lack of knowledge about science in general but more specifically difficulty in grasping the size scale and symbolism of nanotechnology. A potential key to informing the general public is establishing the ability to comprehend the scale of nanotechnology. Transitioning from the macro to the nanoscale seems to require an ability to comprehend scales of one-billion. Scaling is a skill not common in most individuals and tests of their ability to extrapolate size based upon scaling a common object demonstrates that most individuals cannot scale to the extent needed to make the transition to nanoscale. Symbolism is another important vehicle to providing the general public with a basis to understand the concepts of nanotechnology. With increasing age, individuals are able to draw representations of atomic scale objects, but these tend to be iconic and the different representations not easily translated. Ball and stick models are most recognized by the public, which provides an opportunity to present not only useful symbolism but also a reference point for the atomic scale.