Electrochemical characterization of core@shell CoFe2O4/Au composite

Quantum dots (QDs) have received considerable attention due to their unique optical and electrical properties. Although substantial research has focused on the potential applications and toxicological impacts of QDs, far less effort has been directed toward understanding their fate and transport in the environment. In this work, the effect of four coatings, polyethylene glycol functionalized polymer (PEGP), carboxyl derivatized polymer (COOHP), linoleic acid (LA), and polyacrylic acid-octylamine (PAA-OA), on the transport and retention of QDs in porous media were evaluated under environmentally relevant conditions. Aqueous QD suspensions (ca. 10 nM) were introduced into water-saturated columns packed with 40–50 mesh Ottawa sand at a pore-water velocity of 7.6 m/day. At an ionic strength (IS) of 3 mM and pH of 7, PEGP-coated QDs were completely retained within the column, while more than 60 % of COOHP-coated QDs were transported through a column run under identical conditions. When PAA-OA and LA were used as coatings, effluent QD recoveries increased to more than 65 and 89 % of the injected mass, respectively. Additionally, a decrease in pH from 9.5 to 5.0, or an increase of IS from 0 to 30 mM reduced the eluted mass of PAA-OA-coated QDs by more than 2 and 15 times, respectively. The relative mobility of coated QDs (LA > PAA-OA > COOHP > PEGP) was consistent with total interaction energy profiles between QDs and sand surfaces calculated based on Derjaguin–Landau–Verwey–Overbeek (DLVO) theory. At an IS of 3 mM (NaCl) and pH 7, a linear correlation was obtained between the fraction of eluted QDs and the magnitude of the primary interaction energy barrier. These findings demonstrate the strong dependence of QD transport on coating type and indicate that interaction energies based on DLVO theory can be used to predict the relative mobility of QDs in porous media.     

Cycloaddition Reactions of the Metal Phosphorus Double Bonded Complexes CP(CO)2M=PR2 (M = MO,W; R = Alkyl,Aryl)

Abstract

The reaction of the metal phosphorus double bonded species Cp(CO)₂M=PR₂ (M = Mo, W; R = aryl, alkyl) (1)¹⁾ with diverse diazoalkanes, alkenes, alkines and dienes results in the facile formation of the [2+1]-, [2+2]1- and [2+4]-cycloaddition products 2a-c.     

Anionic Graft Copolymers. ll. Styrene Grafts on EPT Rubbers

Rubbers containing a low level of unsaturation such as EPT may be metalated with a chelate made from s-butyllithium and N,N,N′- N′ -tetramethylethylethylenediamine. The lithiated polymers, reacted with styrene, result in polystyrene graft copolymers. The physical properties are affected by graft level and polystyrene content.     

An unexpected tetragonal unit cell for N‐(L‐2‐aminobutyryl)‐L‐serine

The title dipeptide {systematic name: (S)‐2‐[(S)‐2‐azaniumylbutanamido]‐3‐hydroxypropanoate}, C₇H₁₄N₂O₄, was synthesized in the anticipation that it would form nanoporous crystals with hexagonal symmetry. Single‐crystal X‐ray diffraction analysis showed that it had instead adopted a unit cell in the space group I4, similar to L‐alanyl‐L‐alanine [Fletterick, Tsai & Hughes (1970). J. Phys. Chem. 75 , 918–922]. The resulting packing arrangement has a high density for a peptide (1.462 Mg m⁻³), which is rendered possible by extensive disorder over two positions for the ethyl side chain of the 2‐aminobutyric acid fragment and over three positions for the serine side chain.<!?tpb=17.5pt>     

Inactivation of Vaccinia Virus by Natural Sunlight and by Artificial UVB Radiation

This study determined the sensitivity of vaccinia virus, an orthopox virus commonly used as a surrogate for variola virus (etiological agent of smallpox), exposed to UVB radiation emitted by a solar simulator, or to direct natural sunlight. The data obtained indicate that: (1) the virucidal effect of natural sunlight can be mimicked adequately by an artificial light source with similar spectral characteristics in the UVB, (2) viral sensitivity to UVB or to solar radiation can be correlated with experimental data previously obtained with UVC, (3) the correlation factor between virus inactivation by solar radiation (measured at 300 ± 5 nm) and by UVC (254 nm) is between 33 and 60, and (4) the sensitivity of viruses either dry on glass surfaces or in liquid suspension is similar when in the presence of similar amounts of cellular debris and growth media. The findings reported in this study should assist in estimating the threat posed by the persistence of virus during epidemics or after an accidental or intentional release.     

Synthesis of Some Novel bis‐Spiro[indole‐pyrazolinyl‐thiazolidine]‐2,4′‐diones

The reaction of 1H‐indol‐2,3‐diones with 1,6‐dibromohexane has resulted in the formation of new 1H‐indol‐2,3‐diones‐1,1′‐(1,6‐hexanediyl)bis in quantitative yields. These compounds have been used for the synthesis of novel [3′‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl)spiro[3H‐indol‐3,2′‐thiazolidine]‐2,4′‐dione]‐1,1′‐(1,6‐hexanediyl)bis via bis Schiff's bases, [3‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl) imino‐1H‐indol‐2‐one]‐1,1′‐(1,6‐hexanediyl)bis.     

Palladium on Carbon-Catalyzed Cross-Coupling of Aryl Halides with Potassium p-Tolyltrifluoroborate in Air

Palladium supported on carbon (Pd/C) has been shown to be an effective catalyst for the cross-coupling of potassium p-tolyltrifluoroborate with a variety of aryl bromides and iodides. Yields ranging from moderate to good were obtained using Pd/C in ethanol/water mixtures with potassium carbonate as base at 50 °C under an air atmosphere.     

Perylene-based profluorescent nitroxides for the rapid monitoring of polyester degradation upon weathering: An assessment

A profluorescent nitroxide possessing an isoindoline nitroxide moiety linked to a perylene fluorophore was developed to monitor radical mediated degradation of melamine-formaldehyde crosslinked polyester coil coatings in an industry standard accelerated weathering tester. Trapping of polyester-derived radicals (most likely C-radicals) that are generated during polymer degradation leads to fluorescent closed-shell alkoxy amines, which was used to obtain time-dependent degradation profiles to assess the relative stability of different polyesters towards weathering. The nitroxide probe couples excellent thermal stability and satisfactory photostability with high sensitivity and enables detection of free radical damage in polyesters under conditions that mimic exposure to the environment on a time scale of hours rather than months or years required by other testing methods. There are indications that the profluorescent nitroxide undergoes partial photo-degradation in the absence of polymer-derived radicals. Unexpectedly, it was also found that UV-induced fragmentation of the NO–C bond in closed-shell alkoxy amines leads to regeneration of the profluorescent nitroxide and the respective C-radical. The maximum fluorescence intensity that could be achieved with a given probe concentration is therefore not only determined by the amount of polyester radicals formed during accelerated weathering, but also by the light-driven side reactions of the profluorescent nitroxide and the corresponding alkoxy amine radical trapping products. Studies to determine the optimum probe concentration in the polymer matrix revealed that aggregation and re-absorption effects lowered the fluorescence intensity at higher concentrations of the profluorescent nitroxide, but too low probe concentrations, where these effects would be avoided, were not sufficient to trap the amount of polyester radicals formed upon weathering. The optimized experimental conditions were used to assess the impact of temperature and UV irradiance on polymer degradation during accelerated weathering.     

Halonickel 2,4-di-t-butyl-6-(quinolin-8-yliminomethyl)phenolates: Synthesis, characterization and ethylene reactivity

A series of nickel halides bearing 2,4-di-t-butyl-6-(quinolin-8-yliminomethyl) phenolate ligands was synthesized and characterized by IR spectroscopy and elemental analysis.Molecular structures of C1(R = H,X = Br) and C2(R = H,X = Cl) were further confirmed by single-crystal X-ray crystallographic studies,and revealed a distorted square planar geometry at nickel.Upon activation with diethylaluminum chloride(Et 2 AlCl),all nickel pre-catalysts displayed good catalytic activity [up to 9.3 × 10 5 g mol 1(Ni) h 1 ] for ethylene oligomerization with major dimerization.In the presence of methylaluminoxane(MAO),the nickel complex C1 was capable of ethylene polymerization under 3 MPa,and produced polyethylene products with narrow polydispersity(1.16 1.73) and molecular weights in the range of 2.6 4.95 kg/mol.     

Numerical analysis of nematic liquid crystal alignment on asymmetric surface grating structures

The influence of an asymmetric periodic grooved cell surface on the 2D static director configuration of a nematic liquid crystal has been investigated. The minimum in the Frank-Oseen free energy was solved numerically with the Rapini-Papoular form of the surface anchoring energy at the nematic-grating interface. Results are presented for the variation of pretilt angle in the tilted bulk director field as a function of the surface groove depth, pitch and asymmetry and the bulk parameters. The simulations demonstrate the existence of two energetically degenerate high and low pretilted bulk alignment configurations. The pretilt values in these two regimes and also for the low tilt regime with finite surface anchoring are consistent with experimental results. An effective increase in the resolution of the model is obtained by using an irregular grid to describe the surface profile.