A new family of oxide ion conductors based on tricalcium oxy-silicate

Tricalcium oxy-silicates, Ca3(SiO4)O and Ca2.93Mg0.07(Si0.98Al0.02O4)O0.99 [square]0.01, have been prepared as crystalline single phases. Ca3(SiO4)O and Ca2.93Mg0.07(Si0.98Al0.02O4)O0.99 [square]0.01 have triclinic and monoclinic structures, respectively. The samples show oxide anion conductivity with a small p-type electronic contribution under oxidizing conditions. At 1023 K, the oxide transport numbers range between 0.97 and 0.85 from reducing (dry 5%-H2-Ar/air gradient) to oxidizing (O2/air gradient) conditions in the 1023-1173 K interval. The thermal analyses showed a large weight loss on heating due to the presence of water in the materials. The monoclinic compound has ionic conductivities higher than those of the triclinic stoichiometric oxy-silicate, as expected due to the introduction of oxide vacancies. Typical total conductivities for these un-optimised solids are 10(-5)-10(-4) S cm(-1) at 1100 K. These compounds may contain a small amount of water, approximately 0.05 H2O moles per chemical formula, and they display an important proton contribution under a humidified atmosphere.     

A simple helical macrocyclic polyazapyridinophane as a stereoselective receptor of biologically important dicarboxylates under physiological conditions

The interaction of a synthetic enantiopure azamacrocyclic receptor (L) with biologically important chiral dicarboxylates (A, 1-7) has been studied by means of potentiometric titrations in 0.15 M NaCl aqueous solution in a wide pH range. This macrocycle forms strong complexes of the type [HnLA](n-2) (with n = 0-5). As a general trend, the binding is much tighter at basic or neutral pH than in acidic medium. Interestingly, nonprotected excitatory amino acids (Asp and Glu) are strongly bound even at acidic pH. Regarding selectivity, the receptor showed stereoselective binding toward those substrates bearing an H-bonding donor at Calpha, being S-selective in most of the cases, except for glutamic acid. Thus, L displayed an excellent enantioselectivity for (S)-malate dianion (KS/KR = 11.50 at pH 10.0 and KS/KR = 6.86 at pH 7.0) and exhibited moderate enantiopreference for (S,S)-tartrate (KSS/KRR = 3.01 at pH 10 and KSS/KRR = 1.70 at pH 7.0). For this last anion, a very good diastereopreference was also observed (KSS/KRS = 8.46 at pH 10 and KSS/KRS = 4.99 at pH 7.0). On the contrary, L is smoothly R-selective toward (R)-Glu (KR/KS = 3.22 at pH 10 and KR/KS = 2.05 at pH 7.0) due to its longer and more flexible molecular structure. The stereoselectivity of the corresponding complexes decreased when decreasing pH values. For the hydroxy derivatives, mass spectrometry also reflected the trends observed by potentiometry and confirmed the receptor:dicarboxylate 1:1 stoichiometry of the supramolecular complexes. Additional experimental techniques were used to study the most stereoselective example. Solution studies by NMR suggested a good geometrical complementarity between the malate dianion and the receptor, which showed a predominant helical conformation in solution. Besides, self-diffusion rates (PGSE) of the diastereomeric complexes with malate also agree with binding data. Circular dichroism was also used in this case at different pH values, showing a very good correlation between the helical content of the receptor and the stereoselectivity of the molecular recognition process.     

Hierarchical Functionalized Polymeric‐Ceramic Coatings on Mg‐Ca Alloys for Biodegradable Implant Applications

Magnesium‐based implants present several advantages for clinical applications, in particular due to their biocompatibility and degradability. However, degradation products can affect negatively the cell activity. In this work, a combined coating strategy to control the implant degradation and cell regulation processes is evaluated, including plasma electrolytic oxidation (PEO) that produces a 13 µm‐thick Ca, P, and Si containing ceramic coating with surface porosity, and breath figures (BF) approach that produces a porous polymeric poly(ε‐caprolactone) surface. The degradation of PCL‐PEO‐coated Mg hierarchical scaffold can be tailored to promote cell adhesion and proliferation into the porous structure. As a result, cell culture can colonize the inner PEO‐ceramic coating structure where higher amount of bioelements are present. The Mg/PEO/PCL/BF scaffolds exhibit equally good or better premyoblast cell adhesion and proliferation compared with Ti CP control. The biological behavior of this new hierarchical functionalized scaffold can improve the implantation success in bone and cardiovascular clinical applications.     

Studies on Immobilization and Partial Characterization of Lipases from Wheat Seeds (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

The objective of this study was to provide some features on immobilization and partial characterization of lipases from wheat seeds. The optimum pH and temperature were found to be 5.5 and 32–37 °C, respectively. The stability of the concentrated enzymatic extract to high temperatures (25, 35, 45, and 55 °C) showed that the incubation of the extract at 55 °C led to its complete inactivation. The concentrated enzymatic extract kept 90% of its hydrolytic and esterification activities until 70 and 40 days of storage at 4 °C, respectively. The extract presented higher hydrolytic specificity to substrates of medium and long chains and higher esterification affinity to fatty acids of short and medium chains and alcohols with two and three carbon atoms. After the immobilization process using activated coal and sodium alginate as supports, an enhancement of about threefold in lipase activity was observed. The development of the present work permitted us to point out some characteristics of lipases from wheat seeds necessary for the proposition of new future industrial applications for this important biocatalyst.     

Towards Controlled Graft Polymerization of Poly[styrene‐co‐(maleic anhydride)] on Functionalized Silica Mediated by Oxoaminium Bromide Salt. Facile Synthetic Pathway Using Nitroxide Chemistry

A TEMPO bromide salt is used to functionalize a silica surface with nitroxyl moieties. The functionalization reaction takes place in 48 h under mild conditions. In a second step, grafts of styrene‐maleic anhydride copolymer are grown from the functionalized silica surface by heating it in the presence of the monomers. FT‐IR and TGA analysis show that the silica was first functionalized with nitroxide moieties, and then that grafts of styrene‐maleic anhydride grew from the functionalized silica surface. A reaction mechanism is proposed in order to explain the findings. The results suggest that the oxoaminium salts are good candidates for the functionalization and grafting of surfaces that contain hydroxy groups and for the generation of hybrid materials with improved properties.

     

Polymeric Gene Carriers Bearing Pendant β‐Cyclodextrin: The Relevance of Glycoside Permethylation on the “In Vitro” Cell Response

The incorporation of cyclodextrins (CDs) to nonviral cationic polymer vectors is very attractive due to recent studies that report a clear improvement of their cytocompatibility and transfection efficiency. However, a systematic study on the influence of the CD derivatization is still lacking. In this work, the relevance of β‐CD permethylation has been addressed by preparing and evaluating two series of copolymers of the cationic N‐ethyl pyrrolidine methacrylamide (EPA) and styrenic units bearing pendant hydroxylated and permethylated β‐CDs (HCDSt and MeCDSt, respectively). For both cell lines, CDs permethylation shows a strong influence on plasmid DNA complexation, “in vitro” cytocompatibility and transfection efficiency of the resulting copolymers over two murine cell lines. While the incorporation of the hydroxylated CD moiety increased the cytotoxicity of the copolymers in comparison with their homopolycationic counterpart, the permethylated copolymers have shown full cytocompatibility as well as superior transfection efficiency than the controls. This behavior has been related to the different chemical nature of both units and tentatively to a different distribution of units along the polymeric chains. Cellular internalization analysis with fluorescent copo­lymers supports this behavior.

     

1,1',3,3',6,6',8,8'-Octachloro-9,9'-bifluorenylidene and perchloro-9,9'-bifluorenylidene,two exceedingly twisted ethylenes

The syntheses of 1,1',3,3',6,6',8,8'-octachloro-9,9'-bifluorenylidene (1), its precursors, and the byproduct 3,3',5,5'-tetrachloro-4-(trichloromethyl)biphenyl (5) are described. Accurate structural X-ray data on 1 and on perchloro-9,9'-bifluorenylidene (2) are reported and discussed. Because of chlorine overcrowding, the dihedral angles between their two identical fluorenylidene moieties are abnormally large, the central-ethylene twist angles being 55 and 66 degrees, respectively. Significant out-of-plane carbon-chlorine bond bending is likewise exhibited. Their ESR spectra and magnetic measurements prove that they are singlet species. The exceptionally large bathochromic displacements of their UV-vis absorption spectrum with respect to that of their parent hydrocarbon are mainly attributed to bond bending and molecular warping.     

Reaction of CO2 with a Vanadium(II) Aryl Oxide: Synergistic Activation of CO2/Oxo Groups towards H‐Atom Radical Abstraction

Treatment of divalent (ONNO)V(TMEDA) ( 1 ; ONNO=[2,4‐Me₂‐2‐(OH)C₆H₂CH₂]₂N(CH₂)₂NMe₂) with CO₂ afforded [(ONNO)V]₂(μ‐OH)(μ‐formate) ( 2 ). Whereas the bridging hydroxo and formate groups both originated from CO₂, the H atoms present on the two residues were obtained through H‐atom radical abstraction from the solvent. DFT calculations revealed an initially linear CO₂ bonding mode, followed by deoxygenation, and highlighted a synergistic effect between the so‐formed oxo group and an additional bridging CO₂ residue in promoting radical behavior.     

Synthesis of 1,2-di-(4-pyridyl)ethylenediamine and related compounds

Hydrolysis of N,N'-diacyl-1,2-di(4-pyridyl)ethylenediamines 1 in aqueous sulfuric acid gave the corresponding imidazolines 3. 1,2-Di-(4-pyridyl)ethylenediamine 2 was prepared in 61 % yield by treating N,N'-di-t-butyl-oxycarbonyl-1,2-di(4-pyridyl)ethylenediamine 4 with trifluoroacetic acid or in 94% yield by the hydrolysis under basic conditions of N,N'-diphthaloylglycyl-1,2-di(4-pyridy)ethylenediamine 13.     

Host–guest interactions between niobocene dichloride and α-, β-, and γ-cyclodextrins: preparation and characterization

The possible inclusion complexes of Cp₂NbCl₂ into α-, β-, and γ-CD hosts have been investigated. The existence of a true inclusion complex in the solid state was confirmed by a combination of thermogravimetric analysis, FTIR, PXRD, and ¹³C CP-MAS NMR spectroscopies. The solid-state results demonstrated that α-cyclodextrin does not form inclusion complexes with Cp₂NbCl₂ whereas β- and γ-cyclodextrins do form such complexes. PXRD, NMR, and thermal analysis showed that the organometallic molecules of Cp₂NbCl₂OH are included in the cavities of β- and γ-cyclodextrins, possibly adopting a symmetrical conformation in the complex, with each glucose unit in a similar environment. In solution, ¹H NMR experiments suggest that niobocene has a shallow penetration on the β-CD leading to upfield shift on H-3 signal with a minor perturbation on the H-5 proton while for γ-CD, both H-3 and H-5 are shifted upfield substantially. This suggests that niobocene penetrates deeper into the γ-CD cavity than in the β-CD cavity, as a result of the cavity size. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.