Possible existence of triaxial superdeformation in 172,174,176W

Two-dimensional total routhian surface (TRS) calculations are carried out to determine the triaxial superdeformation (TSD) of the even-even nucleus 174W, and the result indicates that TSD state exists with deformation parameters ε2=0.42 and γ=34.7°. In the same way, the total routhian surfaces for the nuclei 172,176W are also calculated. It shows that the neutron shell correction energy plays a key role in the formation of TSD nuclei 172,174,176W, while the high j intruder orbitals and rotational energy are also crucial in the formation mechanism.     

Equation of State of Spin-Polarized Neutron Metier

Within the spin-dependent Brueckner-Hatree-Fock framework, the equation of state of the spin-polarized neutron matter has been investigated by adopting the realistic nucleon-nucleon interaction AV₁₈ supplemented with a microscopic three-body force. The related physical quantities such as spin-symmetry energy, magnetic susceptibility and the Landau parameter G₀ in spin channel, have been extracted. The three-body force effects have been studied and discussed with a special attention. It is shown that in the whole range of spin-polarization, the energy per particle of spin-polarized neutron matter fulfills a quadratic relation versus the spin-polarization parameter δ= (p-p )/p . The predicted spin-symmetry energy is positive in the density region up to ρ = 0.8fm^-3 and increase monotonically as increasing density so that no any evidence is found for a spontaneous transition to a ferromagnetic state in neutron matter. The three-body force effect is to strongly increase the spin-symmetry energy and reduce the magnetic susceptibility at high densities, as a consequence , to make neutron matter become more stable against spin fluctuation. The obtained Landau parameter G₀ and its density dependence may serve as a constraint on the spin-spin parts of the phenomenological Skyrme and Skyrme-like interactions .     

多孔Ni在熔融碳酸盐中原位氧化/锂化时形变及溶解行为的研究

进一步研究在加载及无加载条件下多孔Ni电极在熔融盐中进行原位氧化/锂化时,电极厚度随时间的变化.应用SEM表征不同运行时间后多孔Ni样品的表面形态,用原子吸收光谱(AAS)测定熔盐中溶解的镍离子浓度.结果表明,负载条件下多孔镍在融盐中原位氧化/锂化时,镍离子溶出现象严重,即使无负载条件下,多孔镍在进行原位氧化/锂化过程中,仍有相当量的镍离子溶出并进入熔融碳酸盐电解质中.     

In situ Study of Scanning Tunneling Microscopy On Passivation and Pit Corrosion of Stainless Steel

Traditional ways to investigate passivation and pitting is indirect electrochemical method.In this article, direct information for topography of ultrathin passivating film is obtained by employing in-situ ECSTM to stainless steel (Cr11Ni13 SS). Passivating potentials including 0V,0.2V, 0.5V and 0.8V (Vs.SCE) are applied to the sample in 0.5M H₂SO₄+0.02M NaCl respectively, while surface topography is recorded by STM on the same region, with dimension of 800×800 nanometers. ECSTM result provides a microscopic explanation of EIS. The result describes as fig. 1 and fig. 2.     

Study on the Corrosion Resistance of 304L Stainless Steel

304L is an austenitic stainless steel with very low carbon content, and is served as the application to the oxidizing media, however, its corrosion resistance is not satisfactory in reducing media. For example, the pitting corrosion occurred on 304L stainless steel tube, which had been mounted for one year, somewhere at the power station in die seashore of China. For this reason we have studied the corrosion behavior of 304L in some media and invented a novel surface treatment technique of stainless steel for extremely improving the corrosion resistance of 304L. The characteristics of the modified passive film on the steel were examined in this paper, and the corrosion resistance of treated 304L stainless steel was tested in our laboratory and the testing ground. The results are satisfactory.     

Preparation and Characterization for the Electrodeposited Hybrid Coating of Calcium Phosphate/Chitosan on Ti Alloy Surface

Hydroxyapatite (HA) formulated as Ca₁₀(PO₄)₆(OH)₂ becomes a favorable material for implants because of its chemical similarity to the calcium phosphate minerals present in biological hard tissue. Many efforts have been made in recent years in the development of processing methods for depositing hydroxyapatite on implant alloy substrate in order to have high strength, good processability, suitable specific density, excellent corrosion resistance in the physiological environment and good affinity to the living body. The plasma spray technique is commonly used in the HA coating on implants. The major problem for the plasma spray, however, is the decomposition and phase transformation of hydroxyapatite during the spray coating process. Electrochemical techniques including electrophretic deposition and electro-deposition are being developed as an alternative method for producing hydroyapatite coated composite material. It is very desirable at present to further strengthen the coating and bond it to the metal substrate, and to increase the bioactivity of hydroxyapatite coatings as well, which is very important for forming a strong chemical bond with natural bone as an implant material.     

缓蚀剂对铜作用的激光扫描微区光电化学研究

采用激光扫描微区光电化学显微技术(PEM)对不同浓度下的苯并三氮唑(BTA)及其衍生物4-羧基苯并三唑甲酯与5-羧基苯并三唑甲酯的混合物(CBTME)在硼砂缓冲溶液(pH9.2)中对铜电极的缓蚀作用作了比较研究。研究发现当电位正向扫描至某一电位时,一定浓度的BTA或CBTME作用下,铜电极光响应由p-型转化为n-型,并可依此判断缓蚀剂的缓蚀性能,n-型光响应越大,缓蚀剂的缓蚀性能越好,与循环伏安光电流及交流阻抗测试的结果相一致;实验还发现,影响缓蚀剂对铜作用的过程不仅与缓蚀剂本身有关,还与电极电位有关。在一定的电位与一定的缓蚀剂浓度下可观察到铜电极表面共存着p-型和n-型区域及p转n的过程,因此可从微观上观察到缓蚀剂与铜表面作用的过程,为缓蚀剂的应用建立了良好的理论基础。     

Measurement of photoelectron yield of the CDEX-10 liquid argon detector prototype

The China Dark Matter Experiment (CDEX) is a low background experiment at China Jinping Underground Laboratory (CJPL) designed to directly detect dark matter with a high-purity germanium (HPGe) detector. In the second phase, CDEX-10, which has a 10 kg germanium array detector system, a liquid argon (LAr) anti-Compton active shielding and cooling system is proposed. To study the properties of the LAr detector, a prototype with an active volume of 7 liters of liquid argon was built and operated. The photoelectron yields, as a critically important parameter for the prototype detector, have been measured to be 0.051-0.079 p.e./keV for 662 keV γ rays at different positions. The good agreement between the experimental and simulation results has provided a reasonable understanding and determination of the important parameters such as the surviving fraction of the Ar₂^* excimers, the absorption length for 128 nm photons in liquid argon, the reflectivity of Teflon and so on.     

Studies on odd-parity states of the Sm atom

Two-step excitation and ionization processes are used to detect Sm atoms in many excited states populated with tunable lasers. The wavelength of the first laser is tuned to the resonances from the Sm 4f^6 6s^2 ^7FJ （J=0 6） states to many odd-parity states with different electronic configurations, where the atoms are detected by photoionization process using an ultraviolet laser with a wavelength of 355 nm. Precise measurements on the energy level and intensity for many Sm 4f^6 6s6p and 4f^5 5d6s^2 states have been carried out. In a theoretical analysis on the spectral data, such as peak position, relative intensity, many transitions can be identified as the resonances from the Sm 4f^6 6s^2 7FJ （J=0-6） states to the atomic states with 4f^6 6s6p and 4f^5 5d6s^2 electronic configurations. This work also reports many spectral data on the odd-parity states that cannot be found in the literature.     

多无人机协同的稳定控制机理研究

多无人机协同系统的过度扩散会引起协同失效, 对系统进行规模控制是解决该问题的一种潜在方法. 首先抽象出多无人机协同搜索系统的宏观运动特征, 进而建立平台的运动方程, 然后通过构造合适的李雅普诺夫函数, 获得该系统的稳定控制规律及其控制参数. 仿真结果表明: 1)本文所提的稳定控制机制不仅能够使多无人机系统实现有效的协同, 还能确保系统的稳定性; 2)在系统稳定时, 通过调整相关控制参数可以有效地控制系统规模. 关键词： 无人机 协同系统 稳定控制