以吐温-80为增溶剂催化光度法测定痕量钒(Ⅴ)

本文报道了在硫酸性介质中 ,以吐温 - 80为增溶剂 ,溴酸钾氧化姜黄催化光度法测定痕量钒 ( )的新体系。方法的检出限为 2 .6× 10 -3mg· L-1;相对标准偏差为 2 .7% (n=9) ,线性范围为 0 .0 12— 0 .0 4 0mg· L-1。可用于测定水样中痕量钒 ( ) ,结果满意     

Atomic-scale simulation of nano-grains:structure and diffusion properties

Nanograins are characterized by a typical grain size from lto 100 nm.Mclecular dynamics aimubations have been carried out for the nanograin sphere with the diameters from 1.45 to 10.12 nm.We study the influence of grain size on structure and diffusion properties of the nanograins.The results reveal that as the grain size is reduced,the fraction of grain surface increases significantly,and the surface width is approximately constant；the diffusicn coefficlent is increased sharply,and the relation of the diffusion coefficient and the grain size is close to exponential relation below 10nm.     

车前子中多糖含量的测定

采用蒽酮-硫酸法比色测定，用精制车前子多糖测得车前子多糖对葡萄糖的换算因子，对我国同属不同品种的车前子不同采集时间及炮制前后其多糖含量进行了比较研究。结果表明：此测定方法简便可行。供试液在8h内显色稳定，重现性较好，平均回收率为97．8％，RSD=1．41％(n=5)。江西吉安产大粒车前子生品多糖含量在9．15％～9．83％之间，炮制后其多糖含量在6．29％～6.81％之间；南昌新祺周车前GAP标准基地的大粒车前子生品多糖含量为7.85％～8．38％，炮制后其多糖含量为6．01％～6．64％；东北产的小粒车前子生品多糖含量为6．61％，炮制后其多糖含量为6．45％。     

Time Series Prediction Based on Chaotic Attractor

A new prediction technique is proposed for chaotic time series. The usefulness of the technique is thatit can kick off some false neighbor points which are not suitable for the local estimation of the dynamics systems. Atime-delayed embedding is used to reconstruct the underlying attractor, and the prediction model is based on the timeevolution of the topological neighboring in the phase space. We use a feedforward neural network to approximate thelocal dominant Lyapunov exponent, and choose the spatial neighbors by the Lyapunov exponent. The model is testedfor the Mackey-Glass equation and the convection amplitude of lorenz systems. The results indicate that this predictiontechnique can improve the prediction of chaotic time series.     

ON THE ACOUSTIC ABSORPTION OF MULTI-LAYER ABSORBERS WITH DIFFERENT INNER STRUCTURES

A rigorous finite element analysis procedure is developed to study the effect of the inner structures on the acoustic absorption of multi-layer absorbers. To do this, four types of basic inner structure compartments adopted in the multi-layer absorbers are selected for analysis. These compartments are composed of porous materials inlaid with perforated plates of various shapes, say, triangle, semicircle, convex rectangle and plate shapes. As it is different from the conventional finite element analysis for the acoustic system in the literature, the perforated plates are simulated by appropriate equivalent boundary conditions, depending on their thickness, hole radius, hole pitch and porosity and the air contained in the holes. A large number of total degrees of freedom generated from meshing the air in the holes of perforated plates are thus avoided. The results reveal that the inner structures of the multi-layer absorbers will influence the acoustic absorption at some frequency bands significantly. Based on those features, the multi-layer absorber with a novel inner structure is then designed and manufactured. Both the finite element and experimental results show that its acoustic absorption would be distinctly promoted.     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。     

声诱饵仿真试验系统

文章介绍了声诱饵仿真试验系统中的有关问题，包括：系统的组成、工作原理、对接装置结构等。建立了对接装置声耦合状态下的数学模型，对近场声压分布进行了仿真计算，得出了匹配材料厚度、发射和接收换能器的选取原则。     

乌桕类可可脂结晶过程中表现体积变化

为了解乌桕类可可脂(CTCBE)缓冷结晶横向胀罐爆裂原因，研究CTCBE结晶过程中的膨胀特性，采用流体静力法测试了不同等温结晶条件下CTCBE结晶形成的表观密度和表观体积及其横纵向膨胀状况。结果表明，CTCBE缓冷结晶后形成外部和中部两个晶区。在5-25℃的各等温结晶范围内，当结晶温度增加时，外部结晶区域减小、表观密度变化不大；中部结晶区域增大、表观密度明显减小，CTCBE的表观体积、横向、纵向膨胀率均增大，膨胀横向大于纵向。进一步表明CTCBE在自然缓冷固化的表观体积根本上由其结晶温度决定。为有效防止横向胀罐，自然缓冷固化温度应低于10℃。     

一种微穿孔板消声器

本文根据马大猷教授提出的“微穿孔板吸声体精确理论”，在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上，设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中，并通过编写的噪音数据采集分析程序，对降噪效果进行了测试和分析，验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果，平均降噪7．16dB。     

环境对MgB_2氧化过程中MgO晶须生长形状的影响

用扫描电镜研究了在 Mg B2 氧化过程中环境对 Mg O晶须生长形状的影响。仅有 Mg B2 时 ,在 80 0℃左右空气气氛中 ,可生长出纳米尺寸的 Mg O晶须。若把 Mg B2 添加到氧化铝陶瓷基体中 ,则生长成竹节状晶须。Mg O晶须生长形状的差别可能是由于氧浓度以及位错等因素造成的。