Biochip fluorescence detection system with spatial and spectral separation

A novel optical arrangement for fluorescence detection that employs spatial separation as well as spectral filter to increase the signal to noise ratio is proposed. Using a prism and two mirrors, the elliptical laser beam of a laser diode, as an excitation light, is homogenized and the transmitted excitation light is separated from the fluorescence not to reach the collecting optics. Uncooled CCD can capture the fluorescence image of up to 40 fluorescently-labeled protein patterns without scanning or mechanical translation. This paper presents the simulation, construction and measurement results of the developed optical system. The measurements show that the combination of prism and mirrors converts the excitation light from the laser diode to uniform illumination on the specimen, and provides the separation between excitation and fluorescence light to give high signal to noise ratio. It is also possible to assay various protein concentrations ranging from 1000 to 10 ng/ml reliably. We believe that the proposed fluorescence detection system can be used to build a commercially valuable, low cost, hand-held or miniature fast detection device for point-of-care applications.     

Characterization of surface deformation around Vickers indentations in InGaAsP epilayers on InP substrate

The deformation surrounding Vickers indentations on InGaAsP/InP epilayers have been studied in detail. The surface topography was characterized by using atomic force microscopy (AFM). The material pile-up and sink-in regions around the indentation impression was observed for the quaternary InGaAsP/InP epilayers. The sectional analysis mode of the AFM shows the depth profile at the indented region. Microindentation studies were carried out for different atomic fraction of the quaternary InGaAsP/InP compound semiconductor alloys. The microhardness values of InGaAsP/InP epilayers were found to be in the range of 5.08 and 5.73 GPa. These results show that the hardness value of the quaternary alloy drastically increases as the composition of As was increased by 0.01 atomic fraction and when the phosphorous concentration decreases from 0.4 to 0.38. The reason may be that the increase in As concentration hardens the lattice when phosphorous concentration was less and hardness decreases when phosphorous was increased.     

Study of decay mechanisms in B--->Lambdac+ppi- decays and observation of low-mass structure in the Lambdac+p system

Using a sample of 152 x 10(6) BB pairs accumulated with the Belle detector at the KEKB e+e- collider, we study the decay mechanism of three-body charmed decay B- --> Lambdac+ ppi-. The intermediate two-body decay B--->Sigmac (2455)0 p is observed for the first time with a branching fraction of (3.7 +/- 0.7 +/- 0.4 +/- 1.0) x 10(-5) and a statistical significance of 8.4sigma. We also observe a low-mass enhancement in the (Lambdac+p) system, which can be parametrized as a Breit-Wigner function with a mass of (3.35(-0.02)(+0.01) +/-0.02) GeV/c2 and a width of (0.07(-0.03)(+0.04) +/-0.04) GeV/c2. We measure its branching fraction to be (3.9(-0.7)(+0.8) +/- 0.4 +/- 1.0) x 10(-5) with a statistical significance of 6.2sigma. The errors are statistical, systematic, and that of the Lambdac+-->pK- pi+ decay branching fraction.     

Fourier domain optical coherence tomography using optical demultiplexers imaging at 60,000,000 lines/s

We describe high-speed Fourier domain optical coherence tomography (OCT) using optical demultiplexers (ODs) for spectral dispersion. The OD enables separation of a narrow spectral band of 14 GHz (0.11 nm) from a broadband incident light at 256 different frequencies in 25.0 GHz intervals centered at 192.2 THz (1559.8 nm). OCT imaging of 60,000,000 axial scans per second was achieved through parallel signal acquisition using 256 balanced photoreceivers to simultaneously detect all the output signals from the ODs in a Fourier domain OCT system. OCT imaging at a 16 kHz frame rate, 1100 A-lines per frame, 3 mm depth range, and 23 microm resolution was demonstrated using a resonant scanner for lateral scanning.     

Observation of a new DsJ meson in B+-->D0D0K+ decays

We report the observation of a new DsJ meson produced in B+-->D0DsJ-->D0D0K+. This state has a mass of M=2708+/-9(-10)(+11) MeV/c2, a width Gamma=108+/-23(-31)(+36) MeV/c2 and a 1- spin-parity. The statistical significance of this observation is 8.4 sigma. The results are based on an analysis of 449 x 10(6) BB events collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e+e- collider.     

Novel quantum description of time-dependent molecular interactions obeying a generalized non-central potential

Nonlinear Dynamics - Quantum features of time-dependent molecular interactions are investigated by introducing a time-varying Hamiltonian that involves a generalized non-central potential....     

s- and p-wave neutron spectroscopy Xc. Intermediate structure: 88Sr

Neutron total cross section measurements of natural Sr were made from 50–875 keV using a high resolution proton beam and the ⁷Li(p, n) reaction as a neutron source. These data were analyzed with the help of an R-Matrix code to extract resonance (energies and other) parameters up to about 850 keV. 2p-1h and particle-vibration doorway interpretation of the s-, p- and d-wave resonances is attempted in terms of the sum rule Σγ_n² = γ_d². Predictions based on both of these models agree with the experimental results. As expected the p-wave resonances are stronger than either s- and d-wave structure. Theory accounts for the p-wave strength remarkably well. Possible location of the p-wave s.p. resonance is reproduced with a real potential and its damping due to the imaginary potential is calculated.More fragmentation of the strong p-wave doorways is observed than was expected for a compound nucleus so near ⁹⁰Zr, but a larger strength function is observed apparently due to the p-wave giant resonance.     

Anomalies of ultrasonic velocity in high-Tc ceramics YBa2Cu3Oy and BiSrCaCu2Oy

Ultrasonic longitudinal velocity and adsorption have been measured in ceramic superconductors YBa₂Cu₃O_y with various porosity and also in BiSrCaCu₂O_y. A velocity drop of about 400 ppm was found at T_c only in the measurements on cooling. The magnitude of the velocity drop is anomalously large compared with the value expected from the thermodynamics. A hysteresis of velocity with respect to temperature was observed in all the samples studied. It is suggested that some structural change at pore size level is responsible for this phenomenon.