Heterobimetallic Complexes: Substitution Effects in the [Tetracarbonylrhodiumbis{μ‐(diphenylphosphino)}{μ‐(η:η2‐(4‐diphenylphosphino‐κP)‐2‐methyl‐oxobutyl)}molybdenum](Mo‐Rh) System

Syntheses of the array of heterobimetallic complexes [(OC)₃M(μ‐PPh₂)₂(μ‐O‐C(CHMe(CH₂)₂PPh₂)RhL], M = Cr, Mo, W, L = ^tBuNC, are described, extending the previous study of the counterpart array for L = CO. A single crystal X‐ray structure determination is reported for the M = Mo adduct, enabling comparison with its previously reported L = CO counterpart, for which an improved redetermination is also reported. In the present complex the ^tBuNC ligand is found to be much more weakly bound (Rh‐C 2.026(5) Å) than the carbonyl group it displaces (Rh‐C 1.945(2) Å) with concomitant minor impact on the remainder of the rhodium ambience.     

Zeta potential and electroosmotic mobility in microfluidic devices fabricated from hydrophobic polymers: 2. Slip and interfacial water structure

We discuss the structure of water at hydrophobic interfaces from the standpoint of its impact on electrokinetic phenomena in microfluidic devices fabricated from hydrophobic polymers such as Teflon or Zeonor. Water structuring at hydrophobic interfaces has been described as a source of interfacial charge (see Part 1, this issue), and dewetting phenomena, whether via depletion layers or nanobubbles, contribute to slip and enhanced apparent electrokinetic potentials. Issues concerning the impact of hydrodynamic slip and the role of diffuse interfacial structures are discussed. These issues are coupled with each other and with interfacial charge concerns, providing challenges for measurements of individual parameters.     

A simple and cost effective method for the quantification of 8-hydroxy-2'-deoxyguanosine from urine using liquid chromatography tandem mass spectrometry

A rapid and high-throughput method for the determination of urinary levels of the oxidative stress biomarker, 8-hydroxy-2'-deoxyguanosine (8-OH-dG), has been developed and validated using liquid chromatography combined with electrospray ionization tandem mass spectrometry (LC-MS/MS). The assay features a cheap and readily available non-isotopic internal standard, a single-step filtration sample preparation, and a total analysis time of 6 min including column re-equilibration. The method was validated based on linearity, accuracy (100-106%), precision (CV < 7%), sample preparation stability (< or =5%, 72 h). Intra-laboratory patient ranges were established comparing children and adults (n = 345).     

Mechanism of nanocapsules formation by the emulsion-diffusion process

A detailed investigation into the mechanisms of nanocapsule formation by means of the two stages "emulsion-diffusion" process is reported. Such widely used process is still poorly understood. An emulsion of oil, polymer and ethyl acetate is fabricated as a first step; dilution with pure water allows ethyl acetate to diffuse out from the droplets, leaving a suspension of nanocapsules at the end. It has been shown that the size of nanocapsules was related to the chemical composition of the organic phase and the size of primary emulsion through a simple geometrical relationship. As a consequence, most of the properties of the nanocapsules were decided at the emulsification step. The influence of several formulation and processing parameters of the primary emulsion was studied accordingly. The thin polymer membrane of nanocapsules was observed by means of cryo-fracture electron microscopy. Finally two experiments were designed for a mechanistic investigation of the diffusion step. A step-by-step diffusion of the organic solvent takes place by successive partition equilibria of ethyl acetate between the droplets and aqueous phase. A time-resolved experiment shows the fast diffusion (less than 20 ms) related to the small droplet size of the emulsion.     

Hydride reduction of NAD+ analogues by isopropyl alcohol: kinetics, deuterium isotope effects and mechanism

Observed pseudo-first-order rate constants (k(obs)) of the hydride-transfer reactions from isopropyl alcohol (i-PrOH) to two NAD(+) analogues, 9-phenylxanthylium ion (PhXn(+)) and 10-methylacridinium ion (MA(+)), were determined at temperatures ranging from 49 to 82 degrees C in i-PrOH containing various amounts of AN or water. Formations of the alcohol-cation ether adducts (ROPr-i) were observed as side equilibria. The equilibrium constants for the conversion of PhXn(+) to PhXnOPr-i in i-PrOH/AN (v/v = 1) were determined, and the equilibrium isotope effect (EIE = K(i-PrOH)/K(i-PrOD)) at 62 degrees C was calculated to be 2.67. The k(H) of the hydride-transfer step for both reactions were calculated on the basis of the k(obs) and K. The corresponding deuterium kinetic isotope effects (e.g., KIE(OD)(H) = k(H)(i-PrOH)/k(H)(i-PrOD) and KIE(beta-D6)(H) = k(obs)(i-PrOH)/k(obs)((CD3)2CHOH)), as well as the activation parameters, were derived. For the reaction of PhXn(+) (62 degrees C) and MA(+) (67 degrees C), primary KIE(alpha-D)(H) (4.4 and 2.1, respectively) as well as secondary KIE(OD)(H) (1.07 and 1.18) and KIE(beta-D6)(H) (1.1 and 1.5) were observed. The observed EIE and KIE(OD)(H) were explained in terms of the fractionation factors for deuterium between OH and OH(+)(OH(delta+)) sites. The observed inverse kinetic solvent isotope effect for the reaction of PhXn(+) (k(obs)(i-PrOH)/k(obs)(i-PrOD) = 0.39) is consistent with the intermolecular hydride-transfer mechanism. The dramatic reduction of the reaction rate for MA(+), when the water or i-PrOH cosolvent was replaced by AN, suggests that the hydride-transfer T.S. is stabilized by H-bonding between O of the solvent OH and the substrate alcohol OH(delta+). This result suggests an H-bonding stabilization effect on the T.S. of the alcohol dehydrogenase reactions.     

Azolium-linked cyclophanes: effects of structure, solvent, and counteranions on solution conformation behavior

This paper describes the synthesis, structural characterization, and solution behavior of some xylyl-linked imidazolium and benzimidazolium cyclophanes decorated with alkyl or alkoxy groups. The addition of alkyl/alkoxy chains to the cyclophanes allows for studies in chlorinated solvents, whereas previous solution studies of azolium cyclophanes have generally required highly polar solvents. The azolium cyclophanes may exist in a syn/syn conformation (azolium rings mutually syn, arene rings mutually syn) or a syn/anti conformation (azolium rings mutually syn, arene rings mutually anti). The preferred conformation is significantly affected by (i) binding of bromide (ion pairing) to the protons on the imidazolium or benzimidazolium rings, which occurs in solutions of bromide salts of the cyclophanes in chlorinated solvents, and (ii) the addition of alkoxy groups to the benzimidazolium cyclophanes. These structural modifications have also led to cyclophanes that adopt conformations not previously identified for similar azolium cyclophane analogues. Detailed (1)H NMR studies for one cyclophane identified binding of bromide at two independent sites within the cyclophane.     

Syntheses and molecular structures of some compounds containing many-atom chains end-capped by tricobalt carbonyl clusters

Several complexes containing Co₃ carbonyl clusters end-capping carbon chains of various lengths are described. Pd(0)/Cu(I)-catalysed reactions between {Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ and I(CC)₂SiMe₃ or FcCCI gave {Co₃{μ₃-C(CC)_xR}(μ-dppm)(CO)₇ [x = 4, R = SiMe₃3; x = 3, R = Fc 8]; treatment of 3 with NaOMe and AuCl(PPh₃) gave 4 [x = 4, R = Au(PPh₃)]. Related preparations of Co₃{μ₃-C(CC)₂[Ru(PP)Cp′]}(μ-dppm)_n(CO)_9−2n [PP = (PPh₃)₂, Cp’ = Cp, n = 1, 5; PP = dppe, Cp′ = Cp^∗, n = 1, 6; 0, 7] are also described. Syntheses of bis-cluster complexes {Co₃(μ-dppm)(CO)₇}₂(μ-C_x) (x = 14, 12; 16, 9; 18, 11; 26, 10) - the latter being the longest cluster-capped C_x chains so far described - and the mercury-bridged compounds Hg{(CC)_xC[Co₃(μ-dppm)(CO)₇]}₂ (x = 1, 13; 2, 14) are reported. The molecular structures of 7, 12, 13 and 14, as well as of Co₃(μ₃-CCCSiMe₃)(μ-dppm)(CO)₆(PPh₃) (15) and Co₃{μ₃-CC(O)OEt}(μ-dppm)(CO)₇ (16), are reported.     

Carbonyl substitution chemistry of some trimetallic transition metal cluster complexes with polyfunctional ligands

The trimetallic clusters [Ru₃(CO)₁₀(dppm)], [Ru₃(CO)₁₂] and [RuCo₂(CO)₁₁] react with a number of multifunctional secondary phosphine and tertiary arsine ligands to give products consequent on carbonyl substitution and, in the case of the secondary phosphines, PH activation. The reaction with the unresolved mixed P/S donor, 1-phenylphosphino-2-thio(ethane), HSCH₂CH₂PHPh ( LH₂), gave two products under various conditions which have been characterised by spectroscopic and crystallographic means. These two complexes [Ru₃(μ-dppm)(H)(CO)₇(LH)] and [Ru₃(μ-dppm)(H)(CO)₈(LH)Ru₃(μ-dppm)(CO)₉], show the versatility of the ligand, with it chelating in the former and bridging two Ru₃ units in the latter. The stereogenic centres in the molecules gave rise to complicated spectroscopic data which are consistent with the presence of diastereoisomers. In the case of [Ru₃(CO)₁₂] the reaction with LH₂ gave a poor yield of a tetranuclear butterfly cluster, [Ru₄(CO)₁₀(L)₂], in which two of the ligands bridge opposite hinge wingtip bonds of the cluster. A related ligand, HSCH₂CH₂AsMe(C₆H₄CH₂OMe), reacted with [RuCo₂(CO)₁₁] to give a low yield of the heterobimetallic Ru-Co adduct, [RuCo(CO)₆(SCH₂CH₂AsMe(C₆H₄CH₂OMe))], which appears to be the only one of its type so far structurally characterised.The secondary phosphine, HPMe(C₆H₄(CH₂OMe)) and its oxide HP(O)Me(C₆H₄(CH₂OMe)) also react with the cluster [Ru₃(CO)₁₀(dppm)] to give carbonyl substitution products, [Ru₃(CO)₅(dppm)(μ₂-PMe(C₆H₄CH₂OMe))₄], and [Ru₃H(CO)₇(dppm)(μ₂,η¹-P(O)Me(C₆H₄CH₂OMe))]. The former consists of an open Ru₃ triangle with four phosphide ligands bridging the metal-metal bonds; the latter has the O atom symmetrically bridging one Ru-Ru bond, the P atom being attached to a non-bridged Ru atom.     

Spanning [Pt2(μ-S)2(PPh3)4] metalloligands with 1,4-dimercurated durene

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with 0.5 mol equivalents of durene-1,4-bis(mercuric acetate) [AcOHgC₆Me₄HgOAc] in methanol gives the polynuclear complex [{Pt₂(μ-S)₂(PPh₃)₄}₂(μ-1,4-C₆Me₄Hg₂)]²⁺, isolated as its and salts. Positive-ion ESI mass spectra indicate that [{Pt₂(μ-S)₂(PPh₃)₄}₂(μ-1,4-C₆Me₄Hg₂)]²⁺ undergoes fragmentation by successive loss of PPh₃ ligands, while the ESI mass spectrum of the salt showed additional ions [Pt₂(μ-S)₂(PPh₃)₄(HgC₆Me₄HgPh)]⁺ and [Pt₂(μ-S)₂(PPh₃)₄HgPh]⁺ as a result of phenyl transfer from to Hg. A single-crystal X-ray structure determination on [{Pt₂(μ-S)₂(PPh₃)₄}₂(μ-1,4-C₆Me₄Hg₂)](BPh₄)₂ shows that the cation crystallises on a centre of symmetry, with structural features that are comparable to those of the previously characterised complex [Pt₂(μ-S)₂(PPh₃)₄HgPh]BPh₄.