XPS study of the deposited Ti layer in a magnetron-type sputter ion pump

X-ray photoelectron spectroscopy (XPS) was used to study the surface chemical composition of the anode deposits in a miniature magnetron ion pump. The pump was mounted on an UHV system with the ultimate pressure of 1 × 10⁻⁹ mbar. A stable discharge was established in the nitrogen atmosphere with some traces of CO at about 10⁻⁷ mbar. The cathode was made of pure titanium. The sputtered titanium atoms deposited on the anode, where they reacted with gases to form a film of titanium compounds. The thickness of the deposited titanium layer on the anode was about 100 nm. The results from XPS investigations indicate that active gases such as O₂ and N₂ react with Ti forming TiO₂ and TiN. While carbon containing molecules just adsorb on the surface and do not form carbide. In the bulk of the deposited layer almost pure TiN was found with some traces of oxygen and carbon. The part of carbon was bonded to TiC, which can be caused by ion sputtering during the depth profiling.     

Uniform primeness of the Jordan algebra of symmetric operators

In this note we establish the best possible constant for the general lower estimate for the Jacobson - McCrimmon operator on the algebra of symmetric operators acting on a Hilbert space.

     

Characterization of nitrided and nitrocarburized surface compound layers of machine parts with AES

An investigation has been conducted into the contribution made by nitrogen and nitrogen plus carbon to the chemical composition of surface compound layers of non-alloy steel treated at 843 K. The composition of the compound layers produced by the optimized atmosphere systems was determined by AES. Recommendations are made on how such processes may be controlled.     

Anatase assemblies from algae: coupling biological self-assembly of 3-D nanoparticle structures with synthetic reaction chemistry

The shape-preserving conversion of biologically self-assembled 3-D nanoparticle structures (SiO(2)-based diatom frustules) into a new nanocrystalline material (anatase TiO(2))via a halide gas/solid displacement reaction route is demonstrated.     

Increased surface roughness by oxygen plasma treatment of graphite/polymer composite

The technology of selective plasma etching was applied to increase the surface roughness of graphite/polymer composite. Etching was performed with a low pressure weakly ionised oxygen plasma created with a RF generator of the output power of 200 W and frequency of 27.12 MHz. The density of charged particles, density of neutral oxygen atoms and the electron temperature was about 1×10¹⁶ m⁻³, 4×10²¹ m⁻³, and 5 eV, respectively. The effects of plasma treatment were observed by scanning electron microscope (SEM), electron microprobe (EMPA) and Talysurf. It was found that the surface roughness was increased by approximately 15 times, from a virgin sample at the roughness of R_a=0.27 μm to a very rough surface with R_a=4 μm. The roughness increased with increasing plasma exposure time. The EMPA results showed that the amount of sulphur in the surface layer decreased with increasing etching time indicating that PPS polymer was the material etched preferentially.     

Low-frequency proton NMR relaxometry of a polymer dispersed liquid crystal above TNI

Using proton NMR relaxometry in the kilohertz frequency range, we study dynamics of 5CB liquid crystal molecules dispersed in the form of spherical microdroplets in a PDLC material. The focus of the study is the spin-lattice relaxation in the rotating frame, T1rho(-1), measured above the nematic-isotropic transition TNI. We show that the relaxation rate T1rho(-1)--when induced by uniform molecular translational diffusion in a spherical cavity--depends on the strength of the rotating magnetic field as T1rho(-1) proportional to omega1(-alpha) where alpha varies between 0.7 and 1, depending on the thickness of the ordered surface layer. This relaxation mechanism governs mainly the transverse spin relaxation, whereas the measurements of the frequency and temperature dependence of T1rho(-1) indicate a strong effect of slowing-down of molecular translational diffusion in contact with the polymer surface and yield the average dwell-time of molecules at the surface of the order 10(-5) s.     

Determination of doxycycline in pharmaceuticals and human urine by micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MEKC) was performed at 25 °C and 30 kV (under a pressure of 15 mbar), using 30 mM borate buffer containing 60 mM sodium dodecysulfate (SDS) and 5% (v/v) methanol as background electrolyte (pH 9.0) to determine doxycycline. UV detection was at 350 nm. The method was shown to be specific, accurate (recovery was 100.3 ± 1.0%), linear over the tested range (correlation coefficient 0.9995) and precise (RSD <1.9%). The method was used to determine doxycycline in tablets, capsules and human urine after oral application.     

Intermediate scales in supersymmetric GUTs: the survival of the fittest

We show that intermediate scales in supersymmetric grand unified theories may exist naturally. Their origin is traced to the violation of the survival principle: in supersymmetry internal symmetries often forbid cubic couplings in the superpotential. This leads to a plethora of light supermultiplets whose masses are generated only by higher dimensional operators and thus suppressed by the cut-off scale. These new states often carry exotic quantum numbers and may be, in some cases, accessible to experiments in the near future.     

Oxidation of AISI 304L stainless steel surface with atomic oxygen

Oxidation of stainless steel surface in oxygen atmosphere was investigated by Auger electron spectroscopy (AES) depth profiling. The samples made of AISI 304L stainless steel were exposed to highly non-equilibrium oxygen atmosphere at different temperatures between 300 and 800 K and for different periods between 5 and 600 s. The degree of dissociation of oxygen molecules was of the order of 10%. A thin oxide layer formed on the stainless steel surface consisted of the iron oxide. The thickness depended on the sample temperature. At room temperature it was 7 nm, and it remained the same up to 200 °C. With further increase of temperature, the thickness of the oxide layer increased and reached 40 nm at 450 °C. The thickness was independent of exposure time. The results were explained by two mechanisms of oxide growth. Up to 200 °C the oxidation was run by electro-migration, while at higher temperatures the thermal induced migration prevailed.