In-situ study on thermal decomposition of 1,3-disilabutane to silicon carbide on Si(1 0 0) surface

The intermediates of thermal decomposition of 1,3-disilabutane (SiH₃CH₂SiH₂CH₃, DSB) to form SiC on Si(1 0 0) surface were in situ investigated by reactive ion scattering (RIS), temperature programmed reactive ion scattering (TPRIS), temperature programmed desorption (TPD), and auger electron spectroscopy (AES). DSB as a single molecular precursor was exposed on Si(1 0 0) surface at a low temperature less than 100 K, and then the substrate was heated up to 1000 K. RIS, TPD, and AES investigations showed that DSB adsorbed molecularly and decomposed to SiC via some intermediates on Si(1 0 0) surface as substrate temperature increasing. Between 117 and 150 K molecularly adsorbed DSB desorbed partially and decomposed to CH₄Si₂, which is the first observation on Si(1 0 0) surface, and further decomposed to CH₄Si between 150 and 900 K. CH₄Si lost hydrogen and formed SiC over 900 K.     

Electrochemical and surface behavior of hydyroxyapatite/Ti film on nanotubular Ti-35Nb-xZr alloys

In this paper, we investigated the electrochemical and surface behavior of hydroxyapatite (HA)/Ti films on the nanotubular Ti-35Nb-xZr alloy. The Ti-35Nb-xZr ternary alloys with 3-10 wt.% Zr content were made by an arc melting method. The nanotubular oxide layers were developed on the Ti-35Nb-xZr alloys by an anodic oxidation method in 1 M H₃PO₄ electrolyte containing 0.8 wt% NaF at room temperature. The HA/Ti composite films on the nanotubular oxide surfaces were deposited by a magnetron sputtering method. Their surface characteristics were analyzed by field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS) and an X-ray diffractometer (XRD). The corrosion behavior of the specimens was examined through potentiodynamic and AC impedance tests in 0.9% NaCl solution. From the results, the Ti-35Nb-xZr alloys showed a solely β phase microstructure that resulted from the addition of Zr. The nanotubular structure formed with a diameter of about 200 nm, and the HA/Ti thin film was deposited on the nanotubular structure. The HA/Ti thin film-coated nanotubular Ti-35Nb-xZr alloys showed good corrosion resistance in 0.9% NaCl solution.     

Microwave spectral study of the axial and equatorial conformers of cyanocyclopentane

The microwave spectrum of cyanocyclopentane has been observed and analyzed in the 26.5 to 40.0-GHz frequency region. Rotational transitions were assigned for both an axial and an equatorial conformer. These data and those for the molecule deuterated in the 1-position (1-d-cyanocyclopentane) show that both conformers adopt the C_s envelope structure. For the normal isotopic species the rotational constants have the following values, in megahertz: axial, A = 4297.196, B = 2210.245, C = 2057.205; equatorial, A = 6324.905, B = 1790.937, C = 1497.792. Relative intensity measurements indicate that the ground-state energy difference of the two conformers is 0 ± 200 cal/mole. The low-frequency (pseudorotational) potential surface has been discussed and compared with that of chlorocyclopentane.     

Fourier transform spectroscopy on the 3ν2, 2ν2 + ν6 and ν3 + ν5 bands of H2CO

Fourier transform spectra covering the range from 1500 to 5400 cm^?1 with 0.02-cm^?1 resolution have been obtained for formaldehyde. A study of the region above 4000 cm^?1 has yielded rotational constants and other asymmetric rotor parameters for three bands: 3ν₂ (ν₀ = 5177.7611 ± 0.0005 cm^?1)2ν₂ + ν₆ (ν₀ = 4734.193 ± 0.004 cm^?1), and ν₃ + ν₅ (ν₀ = 4335.102 ± 0.001 cm^?1). An analysis of the A-type Coriolis interaction between the 2ν₂ + ν₆ state and the unobserved 2ν₂ + ν₄ state has yielded partially deperturbed rotational constants for the 2ν₂ + ν₆ state. Vibration-rotation interaction constants have been obtained for the ν₂ and ν₆ normal modes by combining the present results with those of previous workers.     

Transmetalation as a route to novel styryllithium reagents

[structure: see text] Transmetalation of beta-tributyl(styryl)stannanes with n-BuLi gives the functional equivalents of the corresponding styryllithium intermediates. Reaction of the intermediates with chlorotrimethylsilane, iodomethane, or dimethyl sulfate gives the substituted styryl products in moderate to good yields. In all cases, the configuration about the double bond was retained in the products.     

Endosome-escapable magnetic poly(amino acid) nanoparticles for cancer diagnosis and therapy

Endosome-escapable poly(amino acid) nanoparticles composed of iron oxide nanocrystals and anticancer drugs were prepared and demonstrated high T(2) relaxivity coefficients and higher efficacy attributed to the endosomolytic ability of the conjugated histidine moiety.     

Hydrothermal synthesis of Bi2Te3 nanowires through the solid-state interdiffusion of Bi and Te atoms on the surface of Te nanowires

Polycrystalline Bi₂Te₃ nanowires were prepared by a hydrothermal method that involved inducing the nucleation of Bi atoms reduced from BiCl₃ on the surface of Te nanowires, which served as sacrificial templates. A Bi–Te alloy is formed by the interdiffusion of Bi and Te atoms at the boundary between the two metals. The Bi₂Te₃ nanowires synthesized in this study had a length of 3–5 μm, which is the same length as that of the Te nanowires, and a diameter of 300–500 nm, which is greater than that of the Te nanowires. The experimental results indicated that volume expansion of the Bi₂Te₃ nanowires was a result of the interdiffusion of Bi and Te atoms when Bi was alloyed on the surface of the Te nanowires. The morphologies of Bi₂Te₃ are strongly dependent on the reaction conditions such as the temperature and the type and concentration of the reducing agent. The morphologies, crystalline structure and physical properties of the product were analyzed by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and X-ray photoelectron spectroscopy (XPS).     

The Two-Dimensional Electrides XONa (X=Mg,Ca) as Novel Natural Hyperbolic Materials

In two-dimensional electrides, anionic electrons are spatially confined in interlayer regions with high density, comparable to metals, and they are highly mobile, just as free electrons, resembling hyperbolic metamaterials with metal-dielectric multilayered structures. In this work, two-dimensional electride materials MgONa and CaONa are proposed as good natural hyperbolic materials. By using the first-principles calculations based on density functional theory (DFT), the electronic structures, stabilities, and optical properties of two-dimensional electride materials XONa (X=Mg, Ca) are investigated. Our results show that they are stable in 1-monolayer (1-ML) structures as well as in bulk states. They exhibit hyperbolic dispersions from visible to near infrared spectral range with high qualities up to about 700, which is two orders-of-magnitude larger than the preceding bulk hyperbolic materials. Numerical results reveal that they exhibit negative refraction with low losses. Their high-quality hyperbolic responses over a wide spectral range pave the way of broad photonic applications as natural hyperbolic materials.     

A comparative study of two polymorphs of L‐aspartic acid hydrochloride

Two polymorphs of L‐aspartic acid hydrochloride, C₄H₈NO₄⁺·Cl⁻, were obtained from the same aqueous solution. Their crystal structures have been determined from single‐crystal data collected at 100 K. The crystal structures revealed three‐ and two‐dimensional hydrogen‐bonding networks for the triclinic and orthorhombic polymorphs, respectively. The cations and anions are connected to one another via N—H...Cl and O—H...Cl interactions and form alternating cation–anion layer‐like structures. The two polymorphs share common structural features; however, the conformations of the L‐aspartate cations and the crystal packings are different. Furthermore, the molecular packing of the orthorhombic polymorph contains more interesting interactions which seems to be a favourable factor for more efficient charge transfer within the crystal.     

Fast and Selective Semihydrogenation of Alkynes by Palladium Nanoparticles Sandwiched in Metal–Organic Frameworks

The semihydrogenation of alkynes into alkenes rather than alkanes is of great importance in the chemical industry. Unfortunately, state-of-the-art heterogeneous catalysts hardly achieve high turnover frequencies (TOFs) simultaneously with almost full conversion, excellent selectivity, and good stability. Here, we used metal–organic frameworks (MOFs) containing Zr metal nodes (“UiO”) with tunable wettability and electron-withdrawing ability as activity accelerators for the semihydrogenation of alkynes catalyzed by sandwiched palladium nanoparticles (Pd NPs). Impressively, the porous hydrophobic UiO support not only leads to an enrichment of phenylacetylene around the Pd NPs but also renders the Pd surfaces more electron-deficient, which leads to a remarkable catalysis performance, including an exceptionally high TOF of 13835 h⁻¹, 100 % phenylacetylene conversion 93.1 % selectivity towards styrene, and no activity decay after successive catalytic cycles. The strategy of using molecularly tailored supports is universal for boosting the selective semihydrogenation of various terminal and internal alkynes.