Obtaining of monodisperse particles through soap-free and seeded polymerization, respectively, through polymerization in the presence of C60

The present study reports on methods of synthesis of self-assembling monodisperse colloidal particles, obtained for the system styrene (St)–hydroxypropyl methacrylate, through emulsion polymerization, using no surfactant. The syntheses performed have led to the conclusion that the emulsion copolymerization in the presence of fullerene is responsible both for a significant decrease of the particles size as well as for a dimensional monodispersity of the system; the latter has been achieved also through seeded polymerization. The morphology and the size distribution of particles have been explored using scanning electron microscope and dynamic light scattering.     

Polydimethylsiloxane/silica/titania composites prepared by solvent-free sol–gel technique

Composites based on polydimethylsiloxane incorporating silica and titania were prepared by mixing polydimethylsiloxane with proper oxides precursors, tetraethyl-orthosilicate and tetrabutyl-orthotitanate. In the presence of environmental humidity and in acid catalysis, hydrolysis/condensation processes take place with formation of oxides and concomitantly polymer crosslinking. Partial replacement of SiO₂ in a polydimethylsiloxane/silica composite with titania (both generated in situ by sol–gel process) affects surface hydrophilicity (evaluated by dynamic contact angle), water vapor sorption ability (determined by dynamic vapor sorption) and thermal stability. The dielectric properties are also controlled by composition.     

Organolithium-induced alkylative ring opening of aziridines: synthesis of unsaturated amino alcohols and ethers

Organolithium-induced alkylative ring opening of N-sulfonyl-protected aziridinyl ethers is described. The reactions were efficiently carried out with a variety of organolithiums, providing a promising new strategy to unsaturated amino alcohols and ethers. Cis- and trans-1,4-dimethoxybut-2-ene-derived aziridines were prepared, and their propensity to undergo organolithium- induced alkylative desymmetrization is detailed. Use of a single enantiomer of the latter aziridine provides a route to enantiopure unsaturated amino ethers.     

Determination of fluorotelomer alcohols by liquid chromatography/tandem mass spectrometry in water

Fluorotelomer alcohols (FTOHs) are important polyfluorinated raw materials that belong to the general category of perfluoroalkyl substances (PFAS). PFAS, including perfluoroalkyl carboxylates (PFCAs) and perfluoroalkyl sulfonates, have recently attracted considerable attention because they are persistent and found globally in the environment. FTOHs are precursors that may degrade in the environment to PFCAs. The development of analytical methods for determination FTOHs in environmental samples is necessary to determine the environmental presence of FTOHs. This work presents the development and validation of a liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for the determination of FTOHs (6-2, 8-2, 10-2) in aqueous samples. Chromatographic conditions were optimized in order to obtain focused FTOH chromatographic peaks. The mobile phase and mass spectrometric conditions were optimized to enable formation of deprotonated FTOH molecules in the negative ion electrospray mode. Two extraction methods were investigated using acetonitrile and methyl tert-butyl ether (MTBE). These methods were validated for a range of environmental water samples fortified with FTOHs at three different levels. Both extraction methods resulted in recoveries from 70 to 120%. Detection limits of FTOHs were estimated to be approximately 0.09 ng/mL for LC/MS/MS detection. An LC/MS method was also developed for FTOH determination with an estimated 1.2 ng/mL limit of detection. Various sample storage scenarios were investigated. It was determined that the aqueous samples of FTOHs are best preserved by storing them frozen in sealed vials with aluminum foil lined septa.     

Synthesis of highly substituted aniline and o-phenylenediamine derivatives containing various substitution patterns

The Diels-Alder reactions of a variety of 2H-pyran-2-ones 1 with alkynes 2 yielding highly substituted aniline and o-phenylenediamine derivatives 4 with novel (and in some cases known but very rare and useful) structural patterns are presented. The effect of substituents of both reactants on the reaction rates was investigated. The reactions were carried out under thermal conditions, as well as at high pressures.     

Sample preparation for gas chromatographic determination of halogenated volatile organic compounds in environmental and biological samples

In this review, the wide spectrum of the techniques of isolation and/or preconcentration and final determination of halogenated volatile organic compounds (HVOCs) in water, air, soil, sediment and biological fluids are presented and discussed. The techniques discussed are solvent microextraction, solid phase extraction, gas extraction (static and dynamic techniques), membrane processes and passive sampling. Also, direct techniques, such as direct aqueous injection into gas chromatography (GC) column and membrane inlet mass spectrometry, are presented. Main attention is paid to the practical application of these techniques during all HVOCs determination.     

Synthesis and structure of new 3,7,10-substituted-phenothiazine derivatives

The synthesis of new 3,7-dibromophenothiazine derivatives bearing bromoalkyl, mercaptoalkyl and alkylthioacetate groups on the N atom at position 10 is reported. The Suzuki coupling reaction of one of these derivatives via the bromine atoms at positions 3 and 7 with bromothiophene derivatives is also discussed.      

Green analytical chemistry in sample preparation for determination of trace organic pollutants

The principles of green chemistry are applied to not only chemical engineering and synthesis, but also increasingly analytical chemistry. We describe environment-friendly analytical techniques applied to isolate and to enrich trace organic pollutants from solid and aqueous samples. Amounts of organic solvents used in analytical laboratories are reduced by applying solventless extraction, extraction using other types of solvent, assisted solvent extraction and miniaturized analytical systems.