Separation of micro and sub-micro diamagnetic particles in dual ferrofluid streams based on negative magnetophoresis

In the present study, we numerically demonstrate an approach for separation of micro and sub-micro diamagnetic particles in dual ferrofluid streams based on negative magnetophoresis. The dual streams are constructed by an intermediate sheath flow, after which the negative magnetophoretic force induced by an array of permanent magnets dominates the separation of diamagnetic particles. A simple and efficient numerical model is developed to calculate the motions of particles under the action of magnetic field and flow field. Effects of the average flow velocity, the ratio of sheath fluid flow to sample fluid flow, the number of the magnet pair as well as the position of magnet pair are investigated. The optimal parametric condition for complete separation is obtained through the parametric analysis, and the separation principle is further elucidated by the force analysis. The separation of smaller micro and sub-micro diamagnetic particles is finally demonstrated. This study provides an insight into the negative magnetophoretic phenomenon and guides the fabrication of feasible, low-cost diagnostic devices for sub-micro particle separation.     

A Sensor for Serotonin and Dopamine Detection in Cancer Cells Line Based on the Conducting Polymer−Pd Complex Composite

An electrochemical sensor based on the conducting polymer composite with a palladium complex (Pd(C₂H₄N₂S₂)₂) was developed for the detection of serotonin and dopamine simultaneously in the breast cancer cell and human plasma samples. The proposed sensor was fabricated using the Pd(C₂H₄N₂S₂)₂ complex‐anchored poly2,2 : 5,2‐terthiophene‐3‐(p‐benzoic acid) (pTBA) layer on the AuNPs decorated reduced graphene oxide (AuNPs@rGO) substrate, which revealed the enhanced anodic current of the target species. The sensor probe was characterized by electrochemical and surface analysis methods. The experimental parameters affecting the sensor performance were optimized, in terms of AuNPs@rGO concentration, the number of electropolymerization cycle for pTBA, immobilization time of Pd(C₂H₄N₂S₂)₂, and pH. The dynamic ranges for serotonin and dopamine were obtained from 0.02 to 200 μM, and from 0.1 to 200 μM with the detection limit of 2.5, and 24.0 nM, respectively. The reliability of proposed sensor was evaluated using cancer cell lines for the clinical applications.     

Snap-through path in a bistable dielectric elastomer actuator

The dielectric elastomer (DE) has attracted significant attention due to its desired features, including large deformation, fast response, and high energy density. However, for a DE actuator (DEA) utilizing a snap-through deformation mode, most existing theoretical models fail to predict its deformation path. This paper develops a new finite element method (FEM) based on the three-parameter Gent-Gent model suitable for capturing strain-stiffening behaviors. The simulation results are verified by experiments, indicating that the FEM can accurately characterize the snap-through path of a DE. The method proposed in this paper provides theoretical guidance and inspiration for designing and applying DEs and bistable electroactive actuators.     

Nonlinear oscillation of active magnetic bearing–rotor systems with a time-delayed proportional–derivative controller

Nonlinear Dynamics - A time-delayed proportional–derivative controller is applied to suppress the nonlinear vibration of a rigid rotor suspended by the active magnetic bearing (AMB) subjected...     

Relative stability of the 3A2, 1A2, and 1A1 states of phenylnitrene: A difference-dedicated configuration interaction calculation

The relative stability of the ³A₂, ¹A₂, and ¹A₁ states of phenylnitrene is evaluated by means of ab initio calculations followed by difference-dedicated configuration interaction (DDCI). This approach is based on effective Hamiltonian theory at a low order of perturbation to select rationally the determinants which contribute to the energy difference. The CI space built on this criterion is then treated variationally. The method allows a considerable reduction of the CI space compared with a complete CAS*SDCI calculation (where CAS stands for complete active space). Depending on the concerned energy difference, different model spaces may be chosen, as illustrated in the ³A₂ → ¹A₂ and the ³A₂ → ¹A₁ transitions in phenylnitrene. Since the CI space may reach considerable dimensions, a direct CI algorithm for selected CI spaces, the SCIEL algorithm, has been used to perform the calculations. The results are in excellent agreement with previous calculations and with available experimental data. © 1996 by John Wiley & Sons, Inc.     

Effects of guanidinium cations on structural,optoelectronic and photovoltaic properties of perovskites

Guanidinium (GA) cations are intentionally introduced in MAPbl3 perovskite by considering its potential capability of stabilizing the material through plenty of...     

密堆积与中学化学中的晶体结构

联系新课程和化学奥赛的有关内容简要论述了晶体结构的密堆积;分析了密堆积在中学化学晶体结构学习中的地位和作用;举例说明了密堆积对于深刻理解晶体结构的内容和在解决晶体结构问题中的应用。     

RIG型磁光薄膜的研究进展及应用

随着光通信技术与光子集成电路的发展,非互易性器件作为光通信系统中重要的组成部分得到了越来越广泛的研究与应用。基于磁光效应制成的磁光隔离器和环行器是目前应用最为广泛的非互易性器件,为了将非互易性器件整块集成在硅片上,需制备性能与块状磁光材料相当的磁光薄膜。在近红外通信波段(1 550 nm),以钇铁石榴石(Y₃Fe₅O₁₂,YIG)为代表的稀土铁石榴石(RIG)具备优良的磁光效应,是最具应用前景的磁光材料之一。研究发现,使用稀土离子对YIG薄膜进行掺杂可以有效改善其磁光性能,尤其是Bi³⁺和Ce³⁺掺杂的YIG表现出巨法拉第效应。本文首先介绍了法拉第效应原理,介绍了三种常见磁光薄膜的生长方法,回顾了近年来的主要研究成果,介绍了磁光薄膜在光隔离器和环行器中的应用,最后对磁光薄膜的未来发展趋势进行了展望。     

特高含水期油气水混输管道压降计算方法研究

在油田开发后期,产出液的含水率已超过80％,集输管道内介质的流动属于特高含水油气水混合流动。准确的油气水混输管道压降计算,对油田集输系统运行管理有着重要的意义。利用井口到计量间的现有设施,对特高含水期油气水管道的液量、气量、含水率、温度及压降进行了测试。介绍了Baker冲击流压降计算模型,用实测数据对Baker模型进行了修正。计算与测试数据对比分析结果表明,所给的修正压降模型适合特高含水采油期油气水三相冲击流水平管道压降计算。     

基于NURBS的叶片全三维气动优化设计

采用NURBS对叶轮机械叶片的关键截面和基迭线进行参数化表达,该表达方法为基于现代优化算法的叶片粘性气动最优化设计提供设计变量,以实现对叶片截面和叶片基迭线弯、倾、扭、掠变形的控制。该方法编写成的叶片全三维控制模块和网格自动生成程序、CFD程序集成到商业软件iSIGHT中,构成了叶片全三维粘性气动优化设计平台。在该平台上选用ASA成功进行了某透平静叶片的全三维粘性气动最优化设计。实验结果表明通过同时改变叶片截面和叶片基迭线的方法能够有效地抑制叶片的二次流损失,因此该设计平台在叶片气动优化设计中有广阔的应用前景。