Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

Anodic stripping voltammetric determination of bismuth(III) using a Tosflex-coated mercury film electrode

A Tosflex-mercury film electrode (TMFE) was prepared by spin-coating a solution of the perfluorinated anion exchange polymer Tosflex onto a glassy carbon electrode surface followed by electrodeposition of mercury film on this electrode. This electrode was used for the determination of trace bismuth(III) which was preconcentrated onto the TMFE as anionic bismuth(III) complexes with chloride in a chloride medium. The preconcentration was carried out at a potential of-0.2 V, and the preconcentration of the bismuth(III) was enhanced significantly by the anion-exchange feature of Tosflex. The accumulated bismuth(III) was then determined by anodic square-wave stripping voltammetry (SWSV). Various parameters influencing the determination of bismuth(III) were examined in detail. With 2 min accumulation, the analytical signal versus concentration dependence was linear up to 50 ppb, and the detection limit was 0.58 ppb. This modified electrode showed good resistance to the interferences from surface-active compounds and common ions.     

氧化共沉淀法制备纳米级掺锑α—Fe2O3气敏陶瓷粉料

氧化共沉淀法制备纳米级掺锑α┐Ｆｅ２Ｏ３气敏陶瓷粉料王忠春＊＊刘尔生陈耐生＊黄金陵（福州大学化学系福州３５０００２）关键词α－Ｆｅ２Ｏ３陶瓷，锑掺杂气敏材料，纳米材料１９９６－１０－０５收稿，１９９７－０４－２２修回福建省科委资助项目＊＊现在上海硅酸...     

Spectroscopic and DFT studies to understand the liquid formation mechanism in the LiTFSI/acetamide complex system

It is interesting that although both lithium bis(trifluoromethane sulfone) imide (LiN(SO2CF3)2, LiTFSI) and acetamide (CH3CONH2) are solid, their mixture is a liquid in an appropriate molar ratio range at room temperature. The liquid formation mechanism of the LiTFSI/acetamide complex has been investigated by FT-IR and FT-Raman spectroscopy. The spectroscopic studies show that the Li+ ions coordinate with the C=O group of acetamide whereas the SO2 group in TFSI- anions interacts with the NH2 group of acetamide via hydrogen bonding. These interactions lead to the breakage of the hydrogen bonds between acetamide molecules and to the dissociation of LiTFSI, resulting in the formation of this molten salt. Furthermore, it has been found that moderate interaction between LiX and RCONH2 (R = -NH2, -CH3 and -CF3) is favorable for forming a LiX/RCONH2 molten salt system with low eutectic temperature and high conductivity based on density functional theory (DFT) calculational and experimental comparison for different R groups in RCONH2 and different lithium salts.     

Ba-K-Bi-O超导体熔盐阳极电结晶研究

用ＸＰＳ和ＸＲＤ表征了Ｂａ－Ｋ－Ｂｉ－Ｏ超导体熔盐电结晶的阳极和阴 极产物，用ＳＥＭ分析了Ｂａ－Ｋ－Ｂｉ－Ｏ单生长形态。结果表明，阳极产物是Ｂａ－Ｋ－Ｂｉ－Ｏ超导体单晶，以台阶式方式生长。－Ｋ－Ｂ－     

Trace determination of nitrated polycyclic aromatic hydrocarbons using liquid chromatography with on-line electrochemical reduction and fluorescence detection

An efficient clean-up procedure coupled with a high performance liquid chromatography (HPLC) with on-line electrochemical (EC) reduction and fluorescence detection (FLD) was developed to quantify nitrated polycyclic aromatic hydrocarbons (NPAHs) in the airborne particulate. In this process, NPAHs were extracted ultrasonically followed by analysis by using a reversed phase column with an aqueous eluent containing 70% aqueous acetonitrile and sodium monocholoroacetate as a buffer solution. The extraction efficiencies were above 83% for 1-nitropyrene and 1,3-dinitropyrene (1,3-DNP) 1,6-DNP, and 1,8-DNP, and calibration graphs were linear with very good correlation coefficients (r>0.999) and the detection limits were in the range of 1.0-2.2 pg for dinitropyrenes and nitropyrene. The proposed method provides a relatively simple and convenient procedure for determining the NPAHs samples in airborne particulate.     

Structure and properties of a novel 3D straight-channel polyoxovanadate and an unexpected trimeric barbiturate obtained by hydrothermal reactions

The hydrothermal reaction of NaVO(3).H(2)O, barbituric acid, NH(2)NH(2).2HCl, H(3)PO(4), and H(2)O gave a novel heteropolyoxovanadate Na(6)[(P(V)O(4))V(V)(6)V(IV)(12)O(39)](2).H(3)PO(4).31H(2)O (1) and an unexpected phase Na(2)[C(12)H(6)N(6)O(9)].7H(2)O (2). The basic building blocks in 1 are the six-capped sphere-shaped heteropoly anion [(P(V)O(4))V(V)(6)V(IV)(12)O(39)](3-) with framework similar to that of the reported polyoxovanadates possessing [V(18)O(42)] clusters encapsulating VO(4) or other ions. These heterpoly anionic units are linked via V[bond]O[bond]V bridges into an interesting 3D straight-channel structure. The structure of 2 consists of novel organic anions ([C(12)H(6)N(6)O(9)](2-), 5,5-bis(2',4',6'-trioxopyrimidyl)barbital, representing the first oxidized barbituric acid trimer) linked via sodium ions into 1D hollow tubes with diameter of 4.49 x 6.86 A and further connected into a three-dimensional framework via hydrogen bonds.     

Synthesis of Lanthanide Coordination Polymers with Benzophenone-4,4′-dicarboxylate： Effect of Lanthanide Contraction on Structures

Four lanthanide coordination polymers with benzophenone‐4,4′‐dicarboxylic acid (H₂bpndc) and 1,10‐phenanthroline (phen), [Ln₂(bpndc)₃(phen)] (Ln=La (1), Pr (2) and Tb (3)), [Yb(bpndc)₁₅(phen)].05H₂O (4) were obtained through solvothermal synthesis. The crystallographic data show that 1, 2, and 3 are isostructural, the Ln(III) ions in 1, 2 and 3 are all eight‐ and ten‐coordinated, respectively, and thus the Ln(III) ions are connected by bpndc ligands, resulting in an interpenetrating 3D structure. While in 4, the Yb(III) ions are eight‐coordinated and connected by bpndc ligands into a 3D structure with 1D rhombic channels, which result from the effect of lanthanide contraction from La(III) to Yb(III) ions, and the bpndc ligands in 1, 2, 3, and 4 display three types of coordination modes.     

Determination of trace-level haloacetic acids in drinking water by ion chromatography-inductively coupled plasma mass spectrometry

A new method for the determination of nine haloacetic acids (HAAs) with ion chromatography (IC) coupled to inductively coupled plasma mass spectrometry (ICP-MS) was developed. With the very hydrophilic anion-exchange column and steep gradient of sodium hydroxide, the nine HAAs could be well separated in 15 min. After suppression with an ASRS suppressor that was introduced in between IC and ICP-MS, the background was much decreased, the interference caused by sodium ion present in eluent was removed, and the sensitivities of HAAs were greatly improved. The chlorinated and brominated HAAs could be detected as 35ClO and 79Br without interference of the matrix due to the elemental selective ICP-MS. The detection limits for mono-, di-, trichloroacetic acids were between 15.6 and 23.6 microg/l. For the other six bromine-containing HAAs, the detection limits were between 0.34 and 0.99 microg/l. With the pretreatment of OnGuard Ag cartridge to remove high concentration of chloride in sample, the developed method could be applied to the determination of HAAs in many drinking water matrices.     

Alkanethiolate self-assembled monolayers as functional spacers to resist protein adsorption upon Au-coated nerve microelectrode

Alkanethiolate self-assembled monolayers (SAMs) of varied chain lengths were adsorbed upon Au-coated nerve microelectrodes and employed as protein-resistant spacers. The microelectrode spiraled as a cuff type can be used for restoring motor function via electrical stimulation on the peripheral nerve system; however, an increase of electrode impedance might occur during implantation. In this work, a thin-film SAMs treatment upon Au/polyimide (PI) surface of the microelectrode provided a hydrophobic characteristic, which retarded protein adsorption at the initial stage and subsequent pileup (or thickening) process. The protein-resistant effect exhibited comparable SAMs of different chain lengths adsorbed upon Au/PI surfaces. The increase of electrode impedance as a function of protein deposition time was mainly correlated with the addition of reactance that was associated with the pileup thickness of the deposited protein. Particularly, the SAMs-modified surface was capable to detach a significant portion of the accumulated protein from the protein-deposited SAMs/Au/PI, whereas the protein-deposited layers exhibited firm adhesion upon Au/PI surface. It is therefore very promising to apply thin-film SAMs adsorbed upon Au-coated surface for bioinvasive devices that have the need of functional electrical stimulations or sensing nerve signals during chronic implantation.