Porphyrin-aminoquinoline conjugates as telomerase inhibitors

A series of metalloporphyrins was prepared in order to target the G-quadruplex structure of telomeric DNA for the design of antitelomerase compounds. The initial cationic tetramethylpyridiniumyl porphyrin was modified by the replacement of one or two methylpyridiniumyl groups by one or two 4-aminoquinoline moieties, at the meso position, in order to increase the cell penetration and the quadruplex affinity. The porphyrins were either metallated by manganese or by nickel. The degradation of quadruplex DNA was assayed in vitro with the manganese redox-active derivatives. All porphyrins complexes were capable of inhibiting the telomerase enzyme with IC50 values in the micromolar range (TRAP assay).     

Comparison of microextraction procedures to determine pesticides in oranges by liquid chromatography-mass spectrometry

A liquid chromatographic–mass spectrometric method has been developed for the determination of bitertanol, carbendazim, fenthion, flusilazole, hexythiazox, imidacloprid, methidathion, methiocarb, pyriproxyfen and trichlorfon. Two procedures, based on stir bar sorptive extraction (SBSE) and matrix solid-phase dispersion (MSPD), have been evaluated for the extraction of these compounds in oranges. Their respective advantages and disadvantages are also discussed. The recoveries obtained by MSPD ranged from 47 to 96% and the relative standard deviations (RSDs) ranged from 1 to 15%, whereas with the SBSE method the recoveries were between 8 and 84% and the RSDs between 4 and 16%. Although, the limits of quantitation of most compounds are much better (0.001–0.05 mg kg⁻¹) by SBSE, it is not suitable to determine some polar pesticides as carbendazim, imidacloprid and trichlorfon. Results obtained by both methods were compared, in terms of sensitivity and selectivity, with a classical ethyl acetate extraction method, and the three methods were applied to analyze real samples. As MSPD is easier to perform, faster than the organic solvent extraction, and shows equal accuracy and resolution, its application for analyzing pesticides in oranges is recommended.     

Analysis of meat samples for anabolic steroids residues by liquid chromatography/tandem mass spectrometry

A rapid, specific and highly sensitive multi-residue method for the determination of anabolic steroid residues in bovine, pork and poultry muscle tissues was developed. The sample preparation involves enzymatic digestion followed by extraction with methanol. The crude extract was cleaned up by solid-phase extraction (SPE) combining C18 and NH2 columns. The detection was carried out by a highly sensitive liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) method using both positive and negative ionization modes. Natural and synthetic steroids covering different polarities could be extracted, concentrated and purified using one single method. Mobile phase composition and additives were optimized to achieve the highest sensitivity. The linearity was not good enough for quantitative analysis but the method was well-suited for qualitative confirmation. The method was validated according to the European Commission Decision 2002/657/EC. Decision limits (CCalpha) and detection capabilities (CCbeta) were below 0.5 ng g(-1) for all the compounds in the three types of meat studied. The developed method is suitable for routine analysis in our laboratories.     

Imidazolate bridged Cu(II)-Cu(II) and Cu(II)-Zn(II) complexes of a terpyridinophane azamacrocycle: a solution and solid state study

The dinuclear Cu2+ and Zn2+ as well as the mixed Cu2+-Zn2+ complexes of a 5,5'-pentaazaterpyridinophane ligand (L) are able to incorporate imidazolate (Im-) as a bridging ligand. The crystal structure of [Cu(2)L(Im)(Br)(H2O)](CF(3)SO(3))(2).3H2O (1) shows one copper coordinated by the three pyridine nitrogens of the terpyridine unit, one nitrogen of the imidazolate bridge (Im-) and one bromide anion occupying the axial position of a distorted square pyramid. The second copper atom is coordinated by the remaining imidazolate nitrogen, the three secondary nitrogens at the centre of the polyamine bridge and one water molecule that occupies the axial position. Magnetic measurements have been performed in the 2.0-300.0 K temperature range. Experimental data could be satisfactorily reproduced by using an isotropic exchange model H = -JS(1)S(2) with J = -52.3 cm(-1) and g = 2.09. Potentiometric studies have provided details of the speciation and stability constants for the mixed Cu2+-L-HIm, Zn2+-L-HIm (HIm = imidazole) and Cu2+-Zn2+-L-HIm systems. The apparent stability constant obtained at pH = 9 for the addition of imidazole to the dinuclear Cu2+ complexes is one of the highest so far reported (log K = 7.5). UV-Vis spectroscopy and paramagnetic NMR data show that imidazole coordinates to the Cu2+ ions as a bridging imidazolate ligand from pH 5 to 10. Electrochemical reduction of the Cu2+-Zn2+-L complex occurs in two successive one-electron per copper ion quasi-reversible steps. The formal potential of the Cu2+-Zn2+-L/Cu+-Zn2+-L couple is close to that of SOD. The IC50 values measured at pH 7.8 by means of the nitro blue tetrazolium method show significant SOD activity for the dinuclear Cu2+ complexes (IC50 = 2.5 microM) and moderate activity for the Cu2+-Zn2+ mixed systems (IC50 = 30 microM).     

Polymer‐Fullerene Network Formation via Light‐Induced Crosslinking

A facile and efficient methodology for the formation of polymer‐fullerene networks via a light‐induced reaction is reported. The photochemical crosslinking is based on a nitrile imine‐mediated tetrazole‐ene cycloaddition reaction, which proceeds catalyst‐free under UV‐light irradiation (λ_max = 320 nm) at ambient temperature. A tetrazole‐functionalized polymer (M_n = 6500 g mol⁻¹, Ð = 1.3) and fullerene C₆₀ are employed for the formation of the hybrid networks. The tetrazole‐functionalized polymer as well as the fullerene‐containing networks are carefully characterized by NMR spectrometry, size exclusion chromatography, infrared spectroscopy, and elemental analysis. Furthermore, thermal analysis of the fullerene networks and their precursors is carried out. The current contribution thus induces an efficient platform technology for fullerene‐based network formation.

     

Ion-dipole complex formation from deprotonated phenol fatty acid esters evidenced by using gas-phase labeling combined with tandem mass spectrometry

The behavior of para-hydroxy-benzyl and hydroxy-phenylethyl fatty acid esters and methoxy derivatives toward the NH₃/NH₂ ^? system was investigated. Under these negative ion chemical ionization (NICI) conditions, proton abstraction takes place mainly at the more acidic site (i.e., phenol); however, this reaction is not entirely regioselective. Using NICI-ND₃ conditions, both isomeric phenoxide and enolate molecular species are produced in competition from these phenol esters. Their respective low-energy collision-activated dissociation spectra are studied, and they strongly differ, showing that these molecular species are not convertible to a common structure. Analysis of specific fragmentations of the OD-enolate parent species labeled by ND₃ in the gas phase, indicates that by charge-promoted cleavage, isomerization into an ion-dipole intermediate takes place prior to dissociation. This complex, containing a ketene moiety, isomerizes into different isomeric forms via two consecutive proton transfers: the first, which is very exothermic, is irreversible in contrast to the second, less exothermic reaction, which occurs via a reversible process. It is evidenced by the loss of labeling at phenol or enolizable sites in the fragment ions. Such a stepwise process does not take place from the phenoxide parent ion, which preferentially yields a very stable carboxylate ion. A thermochemical approach, using estimated acidity values, yields a rationalization of the observed reactivities of the various substrates studied.     

Determination of benzoylurea insecticides in food by pressurized liquid extraction and LC‐MS

A method based on pressurized liquid extraction and LC‐MS/MS has been developed for determining nine benzoylureas (BUs) in fruit, vegetable, cereals, and animal products. Samples (5 g) were homogenized with diatomaceous earth and extracted in a 22 mL cell with 22 mL of ethyl acetate at 80°C and 1500 psi. After solvent concentration and exchange to methanol, BUs were analyzed by LC‐MS/MS using an IT mass analyzer, which achieved several transitions of precursor ions that increase selectivity providing identification. LOQs were between 0.002 and 0.01 mg/kg, which are equal or lower than maximum residue limits established by the Codex Alimentarius. Excellent linearity was achieved over a range of concentrations from 0.01 to 1 mg/kg with correlation coefficients 0.995–0.999 (n=7). Validation of the total method was performed by analyzing in quintuplicate seven different commodities (milk, eggs, meat, rice, lettuce, avocado, and lemon) at three concentration levels (0.01, 0.1, and 1 mg/kg). The recoveries ranged from 58 to 97% and the RSDs from 5 to 19% depending on the compound and the commodity. The combination of pressurized liquid extraction with LC‐MS/MS provides a sensitive and selective method for the determination of BUs in food.     

Photoresponsive polymers and block copolymers by molecular recognition based on multiple hydrogen bonds

A new methacrylate containing a 2,6‐diacylaminopyridine (DAP) group was synthesized and polymerized via RAFT polymerization to prepare homopolymethacrylates (PDAP) and diblock copolymers combined with a poly(methyl methacrylate) block (PMMA‐b‐PDAP). These polymers can be easily complexed with azobenzene chromophores having thymine (tAZO) or carboxylic groups with a dendritic structure (dAZO), which can form either three or two hydrogen bonds with the DAP groups, respectively. The supramolecular polymers were characterized by spectroscopic techniques, optical microscopy, TGA, and DSC. The supramolecular polymers and block copolymers with dAZO exhibited mesomorphic properties meanwhile with tAZO are amorphous materials. The response of the supramolecular polymers to irradiation with linearly polarized light was also investigated founding that stable optical anisotropy can be photoinduced in all the materials although higher values of birefringence and dichroism were obtained in polymers containing the dendrimeric chromophore dAZO. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3173–3184     

X-ray spectroscopy diagnostic of a plasma produced by femtosecond laser pulses irradiating a cluster target

The parameters of a plasma produced upon the interaction of ultrashort laser pulses with cluster targets are measured by the methods of X-ray spectroscopy. The dependence of the plasma parameters on the initial properties of a cluster target (the design of a supersonic nozzle, the average size of clusters, the spatial inhomogeneity) and the laser pulse properties (its duration and contrast) is studied. The plasma diagnostics is performed using the model of formation of emission spectra, which was proposed earlier and includes a number of fitting parameters, which provide good agreement with experimental spectra. The systematic experimental studies performed by us showed that our model of cluster heating by ultrashort pulses is indeed a physical model, and the fitting parameters represent the average values of plasma parameters in the corresponding space-time regions.     

Formation of Self‐Templated 2,6‐Bis(1,2,3‐triazol‐4‐yl)pyridine [2]Catenanes by Triazolyl Hydrogen Bonding: Selective Anion Hosts for Phosphate

We report the remarkable ability of 2,6‐bis(1,2,3‐triazol‐4‐yl)pyridine ( btp ) compounds 2 with appended olefin amide arms to self‐template the formation of interlocked [2]catenane structures 3 in up to 50 % yield when subjected to olefin ring‐closing metathesis in CH₂Cl₂. X‐ray diffraction crystallography enabled the structural characterization of both the [2]catenane 3 a and the non‐interlocked macrocycle 4 a . These [2]catenanes showed selective triazolyl hydrogen‐bonding interactions with the tetrahedral phosphate anion when screened against a range of ions; 3 a , b are the first examples of selective [2]catenane hosts for phosphate.