A reciprocity inequality for Gaussian Schell-model beams and some of its consequences

A reciprocity inequality is derived, involving the effective size of a planar, secondary, Gaussian Schell-model source and the effective angular spread of the beam that the source generates. The analysis is shown to imply that a fully spatially coherent source of that class (which generates the lowest-order Hermite-Gaussian laser mode) has certain minimal properties.     

Swelling of Water/Nonionic Surfactant Lamellar Liquid Crystals: A Model

A model is presented to provide quantitative measures to estimate the trends of the change in the penetration of the added component into the polar part of the amphiphile layer in lamellar liquid crystals of water and ethoxylated surfactants with added water (or polar solvents). The total thickness of the bi‐layer is treated as composed of an aqueous layer, of a layer of the polar groups from the surfactant and of the hydrocarbon chains of the latter. A fraction α of the added water is assumed penetrating the polar group layer leading to its expansion. The evaluation is built on the fact that experimental determinations of the interlayer spacing in the overwhelming majority of cases show a first order linear dependence on the ratio of added water. In the model this linearity is obtained by variation of the degree of penetration of water. The model indicated a reduction in the degree of penetration with added water, which is a rational trend. The model demonstrates the earlier interpretation of a structure, whose interlayer spacing is invariant with water contents as nonswelling; for example, in which all added water penetrates the amhiphile layer, is not appropriate. The model demonstrates the constancy of the interlayer spacing to be a consequence of a balance between the expansion of the amphiphile layer and the increase of a “free water” layer.     

MICROEMULSION SYSTEMS WITH A NONIONIC COSURFACTANT

The conditions to obtain W/0 microemulsions using ionic surfactants and a nonionic cosurfactant, a polyoxyethylene alkyl ether, were investigated. The length of the polyoxyethylene chain was critical to obtain the typical water solubilization maximum

The variation of the W/0 microemulsion region with hydrocarbon content was different from that of the usual type of microemulsions having a medium chain length alcohol as cosurfactant. In the present systems the W/0 microemulsion region was not a direct continuation of the inverse micellar area at zero content of hydrocarbon. Addition of hydrocarbon was necessary for the formation of inverse micelles

The microemulsion regions were sensitive to the kind of hydrocarbon used; a sign of the importance of the nonionic surfactant for the stability of this kind of microemulsions.     

Quality control in the analysis of lead and cadmium in blood

Summary An extensive quality control programme has been developed within a global UNEP/WHO project on Assessment of Exposure to Lead and Cadmium through Biological Monitoring. This project was coordinated by the Karolinska Institute (Department of Environmental Hygiene) and the National (Swedish) Institute of Environmental Medicine. The project was carried out within the framework of UNEP's Global Environmental Monitoring System (GEMS) and was initiated in 1978 on the basis of recommendations from a UNEP/WHO meeting of a Government Expert Group on Health-Related Monitoring.On termination of the project in 1981 it was decided to extend the analytical QC assurance programme on a periodic basis in order to maintain the analytical capability of the participating laboratories. A QC programme was conducted by our Institute in a follow-up study of the above mentioned UNEP/WHO programme and for a National Swedish Board of Occupational Safety and Health project, as well as for a recently concluded project in which a decrease in bloodlead levels in residents of Stockholm for the period 1980–1984 was established.In the latter project decreased blood-lead levels of about 20% were found in samples stored frozen (–20 ° C) for 4 years. This finding stimulated a study of the long-term stability of our QC samples. Results of lead and cadmium analyses performed for each QC sample during 1980–1985 were computerized. The results showed that the QC samples appeared to be stable for 2–3 years when stored at –20 °C. The losses of cadmium were 5 –10% in 5–6 years of storage at –20 ° C and seem to be less than those of lead (7–15%). Analysis of several QC sets, prepared on different occasions, but analyzed on the same day, confirmed that losses occur.     

Transverse laser-mode structure determination from spatial coherence measurements: Experimental results

We demonstrate experimentally the feasibility of a certain coherence-theoretic algorithm for determining the relative modal weights of a laser beam that consists of multiple Hermite-Gaussian transverse modes. A computer-controlled Young's two-pinhole interferometer with a linear CCD array is used for the coherence measurements. The required scaling parameter (beam width) is obtained iteratively by library routines. Numerical simulations on the stability of the algorithm in the presence of experimental noise are also presented.     

Evaluation of standard and advanced preprocessing methods for the univariate analysis of blood serum 1H-NMR spectra

Proton nuclear magnetic resonance (¹H-NMR)-based metabolomics enables the high-resolution and high-throughput assessment of a broad spectrum of metabolites in biofluids. Despite the straightforward character of the experimental methodology, the analysis of spectral profiles is rather complex, particularly due to the requirement of numerous data preprocessing steps. Here, we evaluate how several of the most common preprocessing procedures affect the subsequent univariate analyses of blood serum spectra, with a particular focus on how the standard methods perform compared to more advanced examples. Carr–Purcell–Meiboom–Gill 1D ¹H spectra were obtained for 240 serum samples from healthy subjects of the Asklepios study. We studied the impact of different preprocessing steps—integral (standard method) and probabilistic quotient normalization; no, equidistant (standard), and adaptive-intelligent binning; mean (standard) and maximum bin intensity data summation—on the resonance intensities of three different types of metabolites: triglycerides, glucose, and creatinine. The effects were evaluated by correlating the differently preprocessed NMR data with the independently measured metabolite concentrations. The analyses revealed that the standard methods performed inferiorly and that a combination of probabilistic quotient normalization after adaptive-intelligent binning and maximum intensity variable definition yielded the best overall results (triglycerides, R = 0.98; glucose, R = 0.76; creatinine, R = 0.70). Therefore, at least in the case of serum metabolomics, these or equivalent methods should be preferred above the standard preprocessing methods, particularly for univariate analyses. Additional optimization of the normalization procedure might further improve the analyses.     

Poly(N-vinyl-2-pyrrolidone) and 1-Octyl-2-pyrrolidinone Modified Ionic Microemulsions

The influence of the nonionic polymer poly(N-vinyl-2-pyrrolidone) (PVP) in comparison to the surfactant 1-octyl-2-pyrrolidinone (OP) on the phase behavior of the system SDS/pentanol/xylene/water was studied. In both modified systems a strong increase in the water solubilization capacity was found, accompanied by a change in the spontaneous curvature toward zero. In the polymer-modified system an isotropic phase channel is formed with increasing polymer content that connects the L1 and the L2 phase. The lamellar liquid crystalline phase is destabilized in both cases. In the L1 phase the adsorption of PVP at the surface of the microemulsion droplets and the formation of a cluster-like structure is proven by several methods like ¹³C NMR T₁ relaxation time measurments, zeta potential measurements, and rheology. In the L2 phase a modification of the interface of the inverse droplets is detected by a shift in the percolation boundary (conductivity) and ¹³C NMR T₁ relaxation measurements. The formation of a cluster-like structure can be assumed on the basis of our rheological measurements.     

Styrene and polystyrene microemulsions. I. Solubility in the W/O system

The solubility of styrene, its oligomers, and different molecular weight polymers was determined in W/O microemulsions stabilized by sodium dodecyl sulfate and pentanol. The results showed a complex pattern due to the interactions with pentanol, surfactant, and associated structures.     

Raman amplification with reduced polarization impairments in the fibre with tailored spin profile

By using two-section fibre where the first section has no spin and the second one is periodically spun, we demonstrate reduced polarization dependent gain and polarization mode dispersion (0.3 dB and 0.0072 ps·km^−1/2 correspondently) in a distributed fibre Raman amplifier.