Investigations of a novel process to the framework of benzo[c]cinnoline

A novel synthetic process leading to the framework of benzo[c]cinnoline has been discovered and investigated. The process is composed of two separate reactions, the first of which is a partial reduction of the nitro groups of the 2,2'-dinitrobiphenyl, a process that we believe proceeds via a SET mechanism to yield the hydroxyamino and nitroso groups. In the following step the cyclization takes place under formation of the -N=N- bond. We believe that this process take place via a radical mechanism through the nitroso radical anion. The novel process affords either benzo[c]cinnoline or benzo[c]cinnoline N-oxide, both in high yields, 93% and 91%, respectively. To obtain benzo[c]cinnoline, the reaction is conducted with an alcohol as solvent and an alkoxide as the base, while for benzo[c]cinnoline N-oxide, water is used as solvent with sodium hydroxide as the base. To establish the latter procedure, statistical experimental design and multivariate modeling were utilized to reveal the response surface for the reaction and to determine the optimal conditions for the reaction. A proposal for the complex reaction mechanism is given. During the corroboration of the mechanism, a new deoxygenation reaction for converting benzo[c]cinnoline N-oxide into benzo[c]cinnoline was discovered. The reaction is conducted by treating the N-oxide with sodium ethoxide at elevated temperature to achieve near-quantitative conversion into benzo[c]cinnoline in a yield of 96%.     

Structure and Thermodynamics of NaF-AlF(3) Melts with Addition of CaF(2) and MgF(2)

The NaF-AlF(3) system with additions of CaF(2) and MgF(2) has been studied with Raman and vapor pressure measurements for 3 >/= CR (NaF/AlF(3) molar ratio) >/= 1 and up to 50 mol % additive. The results show that the binary melt can be described using the two equilibria AlF(6)(3)(-) = AlF(6)(2)(-) + F(-) and AlF(5)(2)(-) = AlF(4)(-) + F(-) with equilibrium constants 0.25 and 0.05, respectively, at 1293 K. Both reactions have positive reaction enthalpies. The first equilibrium is strongly shifted to the right resulting in a melt mixture with very low AlF(6)(3)(-) concentrations even at the Na(3)AlF(6) composition. Evidence for nonideal mixing of anions was found. For the ternaries, models based on Raman data are presented and compared with vapor pressure measurements. Good agreement is observed when association between the additives, CaF(2) or MgF(2), with the AlF(5)(2)(-) ions in the melt was considered. This association could be experimentally observed through a band broadening and a slight shift in the AlF(5)(2)(-) band frequency. Our vapor pressures and Raman data both indicate that MgF(2) clearly acts as an acid when added to NaF-AlF(3) melts of any composition. When CaF(2) is added, a slight decrease of vapor pressure occurs. Raman data indicate a decrease of AlF(4)(-) concentration, corresponding to a dissociation of CaF(2) with liberation of F(-) ions. All these results are, however, very much dependent on the initial melt composition. These data are explained in terms of acid-base, dilution, and association reactions of the solute with the solvent.     

Reaktionen mit phosphororganischen Verbindungen, 49. Synthese und 1H-NMR-Spektren von (3-Acylbicyclo[2.2.1]hept-5-en-2-yl)phosphonsäureestern

Reactions with Organophosphorus Compounds, 49. Synthesis and ¹H NMR Spectra of (3-Acylbicyclo[2.2.1]hept-5-en-2-yl)phosphonates Reaction of the (E)-(β-acylvinyl)phosphonates 1 with cyclopentadiene yields the isomeric norbornylphosphonates 2 (endo-acyl, exo-P) and 3 (exo-acyl, endo-P) in a 7:3 ratio. With 1,3-cyclohexadiene the corresponding bicyclooctenyl derivatives 7 and 8 are obtained from 1a . The (Z)-phosphinylacrylate 4 gives with cyclopentadiene the isomers 5 (exo-CO₂Me, exo-P) and 6 (endo-CO₂Me, endo-P) in nearly equal amounts. The configuration of the cycloadducts has been proved by ¹H NMR spectroscopy.     

X‐Ray Single Crystal Refinement and Superconductivity of La3Ni2B2N3

Crystalline samples of La₃Ni₂B₂N₃ were synthesized using solid state metathesis reactions from combinations of La, LaCl₃, NiCl₂ together with Li₃BN₂. The structure was determined by single crystal X‐ray diffraction (I4/mmm (No. 139), a = 372.95(2) pm, c = 2056.3(2) pm, R₁ = 0.027, wR₂ = 0.062) and confirmed earlier results from neutron powder diffraction. La₃Ni₂B₂N₃ contains BN units capping square planar Ni layers. Isolated nitrogen atoms reside in La₆ octahedra. Magnetic measurements on several bulk samples exhibit superconductivity at temperatures below 14.6 K.     

Chiral synthesis of (2s,3s,7s)-3,7-dimethylpentadecan-2-yl acetate and propionate,potential sex pheromone components of the pine saw-fly neodiprion sertifer (geoff.)

A synthesis of (2S,3S,7S)-3,7-dimethylpentadecan-2-yl acetate ($\text{2}$) and propionate ($\text{3}$) is described. (2S)-2-Methyldecan-1-yl lithium ($\text{5}$) was reacted with (3S,4S)-3,4-dimethyl-γ-butyrolactone ($\text{6}$) to yield the ketoalcohol $\text{19}$ which upon Huang-Minlon reduction furnished (2S,3S,7S)-3,7-dimethylpentadecan-2-ol ($\text{1}$). Acylations gave the esters $\text{2}$ and $\text{3}$. The (2S)-2-methyldecan-1-yl lithium was obtained via asymmetric synthesis. The chiral lactone $\text{6}$ was obtained from (2S,3S)-trans-2,3-epoxybutane and dimethyl malonate.     

Solid-phase synthesis of lipidated peptides

Characteristic partial structures of lipidated proteins embodying different lipid groups as well as additional fluorescent tags or a maleimide for coupling to proteins can be synthesized readily by means of a new solid-phase technique employing the oxidative cleavage of the hydrazide linker as well as on-resin farnesylation and palmitoylation after appropriate deprotection of cysteine thiol groups as the key steps.     

A generalization of the Rouse-Zimm model

The idea of consistently averaging the hydrodynamic interaction and its various consequences for Hookean dumbbells are reviewed. For long chains this idea can be used to generalize the Rouse-Zimm model for polymer solutions. Unlike the usual Rouse-Zimm model, the new model for steady shear flow predicts a nonzero second normal stress coefficient and shear rate dependent material functions. In the limit of long chains, the viscosity and the normal stress coefficients are universal functions of the reduced shear rate.This paper was presented at the Frühjahrstagung des Fachausschusses Polymerphysik der Deutschen Physikalischen Gesellschaft at Kaiserslautern (West Germany), March 12–14, 1986.     

Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.     

Mixed systems of hydrophobically modified polyelectrolytes: controlling rheology by charge and hydrophobe stoichiometry and interaction strength

Rheology and phase separation were investigated for aqueous mixtures of two oppositely charged hydrophobically modified polyelectrolytes. The typical phase separation, normally seen for oppositely charged polymer mixtures, is dramatically reduced by the presence of hydrophobic modification, and phase separation is only detected close to the point of charge neutralization. While the two polyelectrolytes separately can give high viscosities and a gel-like behavior, a pronounced maximum in viscosity and storage modulus with the mixing ratio of the polyelectrolytes is observed; the maximum is located between the points of charge and hydrophobe stoichiometry and reflects a combination of hydrophobic and electrostatic association. Lowering the charge density of the anionic polymer leads to a strengthened association at first, but at lower charge densities there is a weakened association due to the onset of phase separation. The strength of the electrostatic interaction was modified by adding salt. Increased ionic strength can lead to phase separation and to increased or decreased viscosity depending on the polyelectrolyte mixing ratio.     

π-Olefin-iridium-komplexe : IV. Umsetzungen von chloro-dien-iridium-verbindungen mit lithiumorganylen

The complexes [(1,3-C₆H₈)₂IrR] and [(1,3-C₇H₁₀)₂IrR] (R = CH₃, C₆H₅) are obtained by reaction of the corresponding chloro compounds with RLi. Interaction of [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) with CH₃Li in the presence of 1,3-cyclohexadiene or isoprene yields [(COD)(1,3-C₆H₈IrCH₃] and [(COD)(C₅H₈IrCH₃], respectively. The products of the reaction of chlorodicyclodieneiridium with n-C₄H₉Li depend on the ring size of the cyclodiene ligands; with 1,3-cyclohexadiene [(1,3-C₆H₈)₂IrH] is formed while with 1,3-cycloheptadiene [(1,3-C₇H₁₀)(C₇H₉)Ir] is obtained together with [(1,3-C₇H₁₀)₃Ir₂(μ-H)₂]. Chemical and spectroscopic properties of the new compounds are discussed.