Development of a nondestructive method for underglaze painted tiles—demonstrated by the analysis of Persian objects from the nineteenth century

The paper presents an analytical method developed for the nondestructive study of nineteenth-century Persian polychrome underglaze painted tiles. As an example, 9 tiles from French and German museum collections were investigated. Before this work was undertaken little was known about the materials used in pottery at that time, although the broad range of colors and shades, together with their brilliant glazes, made these objects stand out when compared with Iranian ceramics of the preceding periods and suggested the use of new pigments, colorants, and glaze compositions. These materials are thought to be related to provenance and as such appropriate criteria for art-historical attribution. The analytical method is based on the combination of different nondestructive spectroscopic techniques using microfocused beams such as proton-induced X-ray emission/proton-induced γ-ray emission, X-ray fluorescence, 3D X-ray absorption near edge structure, and confocal Raman spectroscopy and also visible spectroscopy. It was established to address the specific difficulties these objects and the technique of underglaze painting raise. The exact definition of the colors observed on the tiles using the Natural Color System?^? helped to attribute them to different colorants. It was possible to establish the presence of Cr- and U-based colorants as new materials in nineteenth-century Persian tilemaking. The difference in glaze composition (Pb, Sn, Na, and K contents) as well as the use of B and Sn were identified as a potential marker for different workshops. Figure UV fluorescence and visible spectroscopy are two of the non-destructive analytical methods used to investigate the coloring agents of underglaze painted tiles. Imaging of the uranium-containing areas was carried out by UV photography and identification of the chemical species by visible spectroscopy.

Enhanced performance of thin-disk lasers by pumping into the zero-phonon line

Pumping Yb:YAG or Yb:LuAG into the zero-phonon line at 969?nm instead of using the common pump wavelength of 940?nm reduces the heat generation by 32%. In addition to the 3% increase of the Stokes efficiency, this significantly reduces the diffraction losses caused by the thermally induced phase distortions leading to a remarkable increase of the overall efficiency especially of fundamental-mode thin-disk lasers. Using this pumping scheme in an Yb:LuAG thin-disk laser, we achieved 742?W of nearly diffraction limited (M²≈1.5) output power at an unprecedented high optical efficiency of 58.5%. For multimode operation (M²≈15) the maximum optical efficiency of an Yb:YAG thin-disk laser was increased to 72%.     

Novel Synthetic Strategy for the Production of Fully Bio-Based Binders Using 2,5-Diformylfuran

In this work, resol based binders were prepared with lignin, resorcinol and the bio-based aldehydic platform chemicals 5-hydroxymethylfurfural (HMF) and 2,5-diformylfuran (DFF). In preliminary studies, the solubility and stability of DFF in aqueous-alkaline conditions was investigated. Various binders were prepared to investigate the influence of the HMF-DFF ratio and the influence of the aldehyde concentration on the molar mass, rheological properties and curing characteristics of the final binders. It is shown that significantly higher molecular weights and viscosities are obtained by using DFF instead of HMF. The properties of the final binder could also be affected by the precise choice of DFF concentration, as this resulted in higher levels of crosslinking. This work offers a novel type of fully bio-based binder that consists of non-toxic components and is therefore less hazardous than some conventional binders.     

Development of a closed-loop control system for production of medium-chain-length poly(3-hydroxyalkanoates) (mcl-PHAs) from bacteria

Large scale availability of bacterial polyhydroxyalkanoates (PHAs) is still limited to a few types of short-chain-length PHAs, namely poly(3-hydroxybutyrate) (PHB) and its copolymer Biopol™, consisting of 3-hydroxybutyrate and 3-hydroxyvalerate repeating units. In order to increase the number of available medium-chain-length PHA (mcl-PHA) copolymers a flexible high-cell-density fed-batch process was developed. Continuous process monitoring and substrate control were achieved by coupling on-line gaschromatography (on-line GC) to a software-based Proportional Integral (PI) substrate controller. System development time and continuous system upgrading were considerably shortened by using LABView™, a powerful graphical programming environment. The control of octanoic acid and 10-undecenoic acid at 1.5 and 0.5 gL⁻¹ respectively, enabled the production of high levels of biomass (30 gL⁻¹) and mcl-PHA (10.5 gL⁻¹) by avoiding substrate limitations or toxicities. The resulting mcl-PHA was an amorphous copolyester consisting of 37 mol% unsaturated monomers. The present system represents a valuable tool for the production of tailor-made mcl-PHAs, where the desired monomer composition is determined by the ratio of added cosubstrates.     

Synthesis and properties in solution of rodlike polyelectrolytes

Efficient synthetic strategies are described for the preparation of rodlike polyelectrolytes based on the intrinsically rigid poly(p-phenylene). Uncharged precursors were first prepared via the Suzuki coupling and then characterized by different methods of polymer analysis. Finally, they were transformed into polyelectrolytes using macromolecular substitution reactions. Depending on the substitution pattern, the obtained polyelectrolytes are either soluble or insoluble in water. Using water-soluble derivatives, the Poisson-Boltzmann cell model was tested by osmotic measurements and small-angle X-ray scattering. It is shown that the cell model provides a good first approximation of the distribution of the counterions around the macroion but still underestimates their correlation. Moreover, the PPP polyelectrolytes show a very pronounced polyelectrolyte effect. Since the rodlike PPPs are very rigid in shape, this observation proves that the polyelectrolyte effect is caused by long-range intermolecular electrostatic repulsion of the dissolved macroions rather than due to conformational changes.     

Design of a flexible but robust setup for temperature-dependent electrochemistry down to cryogenic temperatures

Electrochemistry and its analytics are essential in a variety of scientific and technological fields where properties related to reduction-oxidation reactions, so-called redox properties, are to be explored. While methodological standards for experiments are well established at room temperature, this is still untrue at sub-zero/cryogenic temperatures, the conditions required for the survey of (ultra−)rapid processes and their intermediates. Problems due to “hand-waving” temperature regulation/conditioning and common usage of pseudo-reference electrodes renders cryo-electrochemistry a great challenge. Herein, we describe a robust setup for performing reliable cryo-electrochemical experiments down to −80 °C. It combines highly stable but flexible temperature conditioning with gas-tight sealing of the electrochemical cell setup. Modification of a commercial palladium hydride reference electrode (PdH RE) allows for rapid temperature cycling under cryogenic conditions in aprotic organic solvents. Validation of the setup with the well-known Ferrocene|Ferrocenium (Fc|Fc⁺) redox couple gave good compliance with literature data at room temperature in a range of organic solvent-based electrolytes. Evaluation of temperature-dependent diffusion kinetic parameters, such as diffusion coefficients (D) and diffusional activation energies (E_a,D) from CVs at multiple potential scan-rates and temperature levels emphasize the reliability of the presented cryo-electrochemical setup.     

Contributions to Forming and Analytical Investigations of Solutions of Cellulose and Cellulose Derivatives – A Research and Development Topic of the TITK eV

Modification, forming and analytical characterisation of cellulose and cellulose solutions represents one of the most important research topics of the Thuringian Institute for Textiles and Plastics Research (TITK). The presentation provides information on the current capabilities of the institute and on the analytical methods developed in these fields.