Preparation of Ce-Zr-O solid solution

A single phase solid solution of Ce-Zr-O can be made by using NH₄HCO₃ solution as precipitating agent. The influence of preparation conditions, such as pH, Zr⁴⁺/(CO₃ ^2-+HCO₃ ^-) and Ce³⁺/Zr⁴⁺ ratio on the formation of the solid solution were investigated. The results show that a single phase Ce-Zr-O solid solution can be formed only under a narrow window of preparation conditions, indicating that some compounds are formed in the precipitating process. The compound may contain Ce³⁺, Zr⁴⁺, CO₃ ^2-, HCO^3-, and OH^-. The solid solution so prepared can be described as Ce_0.37Zr_0.63O₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

掺铒a-SixC1-x-H薄膜的发光特性

用等离子体增强化学气相沉积（PECVD）的方法，以固定的氢气（H2）流量和不同的硅烷（SiH4）和甲烷（CH4）流量比沉积了一系列的氢化非晶SiC（a-Si，C1-x-H）膜。用这种宽带隙的a-SixC1-x-H材料作为掺铒的基体材料，通过离子注入的方法得到掺铒的a-SixC1-x-H（a-SixC1-x-H：Er）膜。注入以后的样品经过不同温度的退火。用X射线光电子能谱（XPS）、红外吸收光谱（IR）、拉曼散射谱（Raman）等技术研究不同的SiH4／CH4流量比和退火温度对a-SixC1-x-H：Er发光强度的影响。结果表明，高温退火引起了膜中C的分凝，对饵的发光是不利的。通过低温和室温下铒发光强度的比较，表明这种材料具有较弱的温度猝灭效应。     

Study on pyrolysis kinetics of walnut shell

Slow pyrolysis of walnut shell which is a cheap and abundantly available solid waste was carried out using thermogravimetric analysis. The effects of raw material heating rate on the pyrolysis properties and kinetic parameters were investigated. A two-step consecutive reaction model were used to simulate the pyrolysis process. The kinetic parameters were established by using the pattern search method. Comparison between experimental data and the model prediction indicated that the two-step consecutive reaction model can better describe the slow pyrolysis of walnut shell as the formation of an intermediate during the pyrolysis process was taken into account.     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.     

碘离子选择电极在动力学分析中的应用 Ⅰ.催化电势动力学测锆法研究

本文报道采用碘离子选择电极,系统研究了锆于BO_3~--I~-反应中的定量催化特性,建立了催化电势动力学间接测痕量锆的方法。结果表明,本法专属性较高,55种阴、阳离子均不干扰测锆。     

含氮宾或卡宾的金属羰基簇合物的结构化学研究——Ⅰ.H_2Fe_3(N-C_6H_5)(CO)_9和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9的合成和结构

含氮宾的两个三核羰基铁簇合物是由[Et_3NH][HFe_3(CO)_(11)]与C_6H_5NCO在苯中反应获得。应用四园衍射仪测定了H_2Fe_3(N-C_6H_5)(CO)_9(Ⅰ)和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9(Ⅱ)的晶体结构。晶体数据为:C_(15)H_7NO_9Fe_3(Ⅰ),空间群P2_1/a,a=18.343(2),b=9.072(1),c=11.451(1)(?),β=102.03(1)°,V=1863.7(?)~3,Z=4,D_c=2.143g/cm~3;C_(16)H_5NO_(10)Fe_3(Ⅱ),空间群P2_1/c,a=8.634(1),b=13.026(1),c=17.642(2)(?),β=97.68(1)°,V=1966.3(?)~3,Z=4,D_c=1.820g/cm结构系用直接法解出,最后R_(Ⅰ)因子为0.033,R_(Ⅱ)因子为0.027。测定结果表明,(Ⅰ)和(Ⅱ)分子均具有C_s对称性,且三个Fe原子共面,呈近似等边三角形结构。(Ⅰ)中面桥N原子以不对称方式与三个Fe原子成键;(Ⅱ)中面桥羰基以不对称方式与三个Fe原子键连。Fe-N和Fe-C键长分别在1.896-1.938(?)和2.006-2.110(?)之间。     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

Preparation and catalytic performance of superfine Ni/BaTiO3 catalyst

Superfine Ni/BaTiO₃ catalysts were prepared by impregnation method and used successfully for CO₂ reforming CH₄ to syngas. The effects of preparation method and the temperatures of calcination, reduction and reaction on the catalytic activity of the Ni/BaTiO₃ system were investigated. This revised version was published online in June 2006 with corrections to the Cover Date.     

Dynamic Study of Gemini Surfactant and Single-chain Surfactant at Air／Water Interface

Molecular dynamics (MD) simulation are used to study the properties of gemini surfactant of ethyl-α,ω-bis(dodecyldimethylammonium bromide) (C12C2C12) and dodecyl-trimethylammonium bromide (DTAB) at the air/water interface, respectively. In the two systems,t he surfactant concentrations are both 28 wt.%, and other conditions are also the same. After reaching the thermodynamic equilibrium, the concentration profiles, the radial distributions functions (RDF) and the mean squared displacement (MSD) are investigated. The results reveal that the surface activity of C12C2C12 surfactant is higher than DTAB surfactant.     

CdSe/ZnS-labeled carboxymethyl chitosan as a bioprobe for live cell imaging

A simple and convenient method for the construction of CdSe/ZnS-labeled polysaccharides as bioprobes were developed, which are highly biocompatible and photostable, and have been proven to be suitable for live cell imaging.