LC–MS/MS法测定动物性食品中万古霉素残留

建立液相色谱–串联质谱(LC–MS/MS)法检测动物性食品中万古霉素药物残留的方法。用磷酸盐缓冲溶液对动物性食品中的万古霉素进行提取,经HLB固相萃取柱净化,采用电喷雾离子源,以正离子检测方式进行质谱分析。实验结果表明,万古霉素质量浓度在1~500μg/L范围内与色谱峰面积呈良好的线性,相关系数r=0.998。低、中、高3个质量浓度添加水平的回收率为84.8%~118.2%,相对标准偏差为2.2%~7.2%(n=5),检出限为2μg/kg。     

Liquid fragility of the unsaturated polyester resin

Curing behaviors of the unsaturated polyester resin (UPR) containing 1–1.8 wt% methyl ethyl ketone peroxide (MEKP) initiator are investigated. The viscosity, gelation and vitrification transition of the UPR-MEKP systems are examined using the rotating viscometer and differential scanning calorimetry (DSC). A liquid fragility parameter, M _c, defined as the viscosity variation rate of the liquids towards the curing temperature is presented. It is found that M _c has a good negative relation with the glass transition temperature (T _g) in the systems. M _c can be used for predicting the stability of the cured amorphous systems. The relationship between the liquid and cured thermoset polymer systems is studied from both the thermodynamic and kinetic point of view.     

Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.     

Synthesis of Imides by Palladium‐Catalyzed C?H Functionalization of Aldehydes with Secondary Amides

An efficient palladium‐catalyzed C? H functionalization of aldehydes with various N‐substituted N‐heteroarene‐2‐carboxamides has been developed for the synthesis of secondary imides. The reaction tolerates various functionalities, such as methoxy, fluoro, chloro, and bromo groups. A tentative radical mechanism for a Pd^II/Pd^IV catalytic cycle is proposed.     

High‐Order Soliton Solution of Landau–Lifshitz Equation

The Landau–Lifshitz equation is analyzed via the inverse scattering method. First, we give the well‐posedness theory for Landau–Lifshitz equation with the frame of inverse scattering method. The generalized Darboux transformation is rigorous considered in the frame of inverse scattering transformation. Finally, we give the high‐order soliton solution formula of Landau–Lifshitz equation and vortex filament equation.     

Analytical analysis of anisotropic thermophoresis of a charged spheroidal colloid in aqueous media for extremely thin EDL cases

Thermophoresis of charged spheroids has been widely applied in biology and medical science. In this work, we report an analysis of the anisotropic thermophoresis of diluted spheroidal colloids in aqueous media for extremely thin EDL cases. Under the boundary layer approximation, we formulate the thermophoretic velocity, the thermophoretic force, and the thermodiffusion coefficient of a randomly dispersed spheroid. The parametric studies show that under the aforementioned conditions, the thermophoresis is anisotropic and its thermodiffusion coefficient should be considered as a vector, D _T. The thermodiffusion coefficient values and directions of D _T are strongly related to the aspect ratio and the angle θ between the externally applied temperature gradient and the particle's axis of revolution: The increasing aspect ratio enlarges the thermodiffusion coefficient value D_T of prolate (oblate) spheroids to a constant value when θ < 60° (θ > 45°), and it reduces D_T of prolate (oblate) spheroids to a constant value when θ > 60° (θ < 45°). The thermodiffusion coefficient direction of both prolate and oblate spheroids deviates slightly from −∇T_∞ for a small aspect ratio, and such deviation becomes serious for a large aspect ratio.     

Superthermostability of nanoscale TIC-reinforced copper alloys manufactured by a two-step ball-milling process

A Cu-TiC alloy, with nanoscale TiC particles highly dispersed in the submicron-grained Cu matrix, was manufactured by a self-developed two-step ball-milling process on Cu, Ti and C powders. The thermostability of the composite was evaluated by high-temperature isothermal annealing treatments, with temperatures ranging from 727 to 1273 K. The semicoherent nanoscale TiC particles with Cu matrix, mainly located along the grain boundaries, were found to exhibit the promising trait of blocking grain boundary migrations, which leads to a super-stabilized microstructures up to approximately the melting point of copper (1223 K). Furthermore, the Cu-TiC alloys after annealing at 1323 K showed a slight decrease in Vickers hardness as well as the duplex microstructure due to selective grain growth, which were discussed in terms of hardness contributions from various mechanisms.     

Miscibility and crystallization behaviors of stereocomplex-type poly(l- and d-lactide)/poly(methyl methacrylate) blends

Stereocomplex-poly(l- and d-lactide) (sc-PLA) and poly(methyl methacrylate) (PMMA) blends were prepared by solution blending at PMMA loadings from 20 to 80 mass%. The miscibility and crystallization behaviors of the blends have been studied in detail by differential scanning calorimeter. The single-glass transition temperatures (T _g) of the blends demonstrated that the obtained system was miscible in the amorphous state. It was observed that the crystallization peak temperature of sc-PLA/PMMA blends was marginally lower than that of neat sc-PLA at various cooling rates, indicating the dilution effect of PMMA on the sc-PLA component to restrain the overall crystallization process. In the study of isothermal crystallization kinetics, the reciprocal value of crystallization peak time ( \( t_{\text{p}}^{ - 1} \) ) decreased with increasing PMMA content, indicating that the addition of non-crystalline PMMA inhibited the isothermal crystallization of sc-PLA at an identical crystallization temperature (T _c). Moreover, the negative value of Flory–Huggins interaction parameter (χ ₁₂ = ?0.16) of the blend further indicated that sc-PLA and PMMA formed miscible blends.     

Aliphatic Organoimido Derivatives of Polyoxometalates Containing a Bioactive Ligand

A series of aliphatic organoimido derivatives of hexamolybdate based on amantadine, namely (nBu₄N)₂[Mo₆O₁₈(?NC₁₀H₁₅)] ( 1 ), (nBu₄N)₂ {cis‐[Mo₆O₁₇(?NC₁₀H₁₅)₂]} ( 2 ), (nBu₄N)₂{trans‐[Mo₆O₁₇(?NC₁₀H₁₅)₂]} ( 3 ), and (nBu₄N)₂[Mo₆O₁₆(?NC₁₀H₁₅)₃] ( 4 ), was synthesized in reasonable yield by dehydration with N,N′‐dicyclohexylcarbodiimide (DCC). They were characterized by IR and UV/Vis spectroscopy, elemental analysis, ESI mass spectrometry, and single‐crystal X‐ray structure analysis. The spectral and structural similarities and differences between monosubstituted, cis‐disubstituted, and trans‐disubstituted organoimido derivatives were elucidated and may provide guidance for related work on organoimido‐functionalized Lindqvist‐type polyoxometalates. In addition, trans‐disubstituted and polysubstituted derivatives containing aliphatic organoimido ligands have not yet been reported, and the crystal structure of the trans isomer may lead us to a deeper understanding of disubstituted derivatives. Furthermore, proliferation and morphology of MCF‐7 cells were studied with compound 1 . The present results show that the DCC‐dehydrating protocol could be an efficient approach to covalently graft bioactive ligands such as amantadine onto POMs and enhance their application in clinical cancer treatment.     

光催化甲烷转化研究进展

甲烷催化转化为高附加值产物、实现甲烷高效利用,具有重要的研究意义及工业应用价值。长期以来,如何在较温和的条件下将甲烷转化为其它更有价值的有机衍生物,如醇、芳烃、长链烷烃和烯烃等,是催化、化学及化工领域的热点和难点课题之一。光催化反应由光能激发产生光生电子和空穴,参与到甲烷C―H键活化和自由基形成,这为低温甲烷转化提供新的途径,本文主要围绕甲烷氧化和偶联反应,总结了近年来光催化研究进展,并对如何进一步提高光催化性能提出展望。